Cable unwinding tools

1 | Cable uncoiler

PDF-Sheet

Cable uncoiler steel galvanized, with ball-bearings, with 4 adjustable spindles. Used for installation works. For rings of D 100-700 mm. Length measuring device (see below) to be ordered separately.

,,,

Code	Type	Ring-D	Dimension	SWL	kg
320120	KA 600	100-500	D 600/440	40 kg	7,00
320140	KA 700	150-600	D 700/440	60 kg	15,50
320160	KA 800	250-700	D 800/440	60 kg	18,00

2 | Cable length meters

PDF-Sheet

Cable and line length meter for KA 700-800, counter up to 999,99,99 m, accuracy ± 0,8 %.

,,,

Code	Type	Suitable for	C-D	St-rope	kg
320240	KL 21	KA 700-800	3-21	no	3,40
320245	KL 21S	KA 700-800	3-21	3-12	3,40
320250	KL 50	KA 700-800	3-50	no	4,20
320255	KL 50S	KA 700-800	3-50	3-22	4,20

3 | Cable unwinder

PDF-Sheet

Cable drum unwinder for very small drums with one or two flanges. The unwinder can accommodate a wide variety of drums with a bore from 20 mm by combining different cones. Due to its low weight of only 6.4 kg, it is very handy and yet has a high stability. This makes it very safe to use, e.g. for in-house cabling.

For drum D up to 300 mm and drum width up to 220 mm, weight max. 5 kg
Clamping bearings for easy running and small pull-off forces
All cones are included and attached to the unit

,Cable-coiler-uncoiler-unwinder,Cable-drum-windoff-roller,Enrouleur-dérouleur-câbles-bobine,Bobinadores-desbobinadores-desenrolladores-de-cables

Code	Type	Equipment	Shaft	Cones for								kg
320630	KTA 3	Winder as above	D 25	Hole D 25-50								6,40

4 | Cable unwinder

PDF-Sheet

Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.

Collapsible for easy transportation to the site.
Easy movable with the drum through big rubber coated wheels.
For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.

,Cable-coiler-uncoiler-unwinder,Cable-drum-windoff-roller,Enrouleur-dérouleur-câbles-bobine,Bobinadores-desbobinadores-desenrolladores-de-cables

,,,

Code	Type	Equipment	Shaft	Cones for	kg
320290	KTA 8	Winder as above	D 25	Hole D 25-80	11,60
320292	KTA 8W	Steel tube shaft	D 50	See next line	2,05
315504	ZKP 50-80	Poly-cone (1 each)	D 50	Hole-D 50-80	0,15
3155045	ZKP 50-108	Poly-cone (1 each)	D 50	Hole-D 50-108	0,39

5 | Cable drum tipping stand

PDF-Sheet
PDF-Drawing

Cable drum tipping stands. Simple drum unwinding equipment at installation works. Excellent tipping leverage due to optimum positioning of centre of gravity. Capable of lifting heavy loads. Tubular steel construction galvanized.

,,,

Code	Type	Drum-D	Shaft	Max.	Int./ext.width	kg
320300	KW 6-8	600-800	D 48	300 kg	600/880	13,00
320320	KW 6-10	600-1000	D 48	500 kg	700/985	22,00
320330	KW 6-12	600-1250	D 48	800 kg	930/1250	38,00

6 | Stepped bushes

PDF-Sheet

Stepped bushes of polyamide for shaft-D 48, one step D 80, for drum tipping stands KW 6-12.

,,,

Code	Type	For shaft	For drum bore									kg
315503	ZBP 48	D 48	D 80									0,37

7 | Drum unwinding stand for FOC

PDF-Sheet

Drum unwinding stand for FOC or subduct drums, galvanized. Equipped with a lightweight aluminium shaft D 75 mm with drum shaft securing and 2 clamps.

Sturdy steel construction, hot galvanized, easy dismountable by hand for transportation.
Two crank spindles to lift the stand for unwind cables in any position.
High stability under load even in uneven places.
For drum-D to 1400, and drum width to 900, drum weight max. 500 kg.
As accessory alu-drum shaft D 50, ball bearings, order clamps and cones separately, see table below.
Dimensions mounted: L/W/H 1450/1400/689.

,,,

Code	Type	Equipment	Shaft	Cones for	kg
344355	TRG 1140	Winder as above	D 75	---	96,00
350592	TAK 5013	Alu drum shaft	D 50	---	7,40
315030	KSV 51	Shaft clamps	D 50	---	1,30
315504	ZKP 50-80	Poly-cone (1 each)	D 50	Hole-D 50-80	0,15
3155045	ZKP 50-108	Poly-cone (1 each)	D 50	Hole-D 50-108	0,39

8 | Drum wind off roller

PDF-Sheet

Spare parts

Cable drum wind-off roller for cables or ropes. Steel construction, powder coated. Steel rollers galvanized with ball bearings.

Rollers adjustable for smaller spools down to Ø 100
Rubber feet for stable and quiet running

,,,

Code	Type	For drum-D	Drum width	SWL	L/W/H mm							kg
320660	KTA 7	100-1200	max. 500	150 kg	530/550/110							8,80

9 | Drum wind off roller

PDF-Sheet

Spare parts

Cable drum wind-off roller, alu chassis with adjustable alu-rollers with ball bearings. Two required. Dimension each: 980x220x145 mm. Further techn. Details see table below.

,,,

Code	Type	Support	Wooden drum-D	Steel drum-D								kg
320710	KTA 2A	Alu	400-1000/kg 500	400-1600/kg 1000								8,20