Cable tray flank roller with fixing clamps for attachment outside of the tray. By turning the roller, inside or outside cable curves can be pulled. For cable-Ø max. 40 mm.
Cable tray roller for pulling-in of several cables one after the others. Two lateral rollers can be turn down to lay the cables in the trays. Low construction. This roller can be taken away underneath the tray. Steel construction galvanized with polyamide rollers.
Cable tray roller for inside the tray with cross members of 500 mm spanning the tray. After pulling this roller can be removed below the tray. Steel construction galvanized with 1 alu-roller.
Cable tray rollers of 3 rollers for bigger cables, with clamp. Steel construction galvanized. Can be fixed outside or inside the tray in order to locate the cable in the trays. Without support. The roller can be closed with the barrier roller to achieve an accurate cable guidance.
Can be fixed in- or outside on 2 tray edges.
After the pull the cable can be simply put into the cable tray.
The barrier roller completes a safe guidance for the cable.
Cable tray rollers of 3 rollers for bigger cables. Steel construction galvanized. Can be fixed outside or inside the tray in order to locate the cable in the trays. Without support. The roller can be closed with the barrier roller to achieve an accurate cable guidance.
Can be fixed in- or outside on 2 tray edges.
After the pull the cable can be simply put into the cable tray.
The barrier roller completes a safe guidance for the cable.
Cable guide rollers, 4 high wattage-rollers of thick wall steel with ball bearings. Opening in all positions. Steel construction galvanized. accessory for fixing on canal braces, on mounting base or on profiles are available.
Parts for supporting and fixing a.m. cable guide rollers ER 4-100-300 these standards can be screwed on all sizes. Special supports adapted to any kind of profiles are available at short notice.
Support for fixing guide rollers on suspension stays 16 A1 or 16 A3. With it the guide rollers can be fixed in any position, e.g. vertical or horizontal suitable for pulling heaviest cables. Steel galvanized.
Cable tray curve unit 90° angle with 4 alu rollers. Bending radius 400 mm. Compact version allows application under difficult conditions. Steel construction galvanized.
Cable tray curve unit 45° angle with 3 alu rollers. Bending radius 600 mm. Compact version allows application under difficult conditions. Steel construction galvanized.
Cable tray corner roller, 45°, 3 steel rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Suitable for heavy cable pulls.
Cable tray corner roller, 90°, 3 steel rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Suitable for heavy cable pulls.
