Cable trailer hydraulic loading for lorry transport up to 80 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below. *Payload without accessory. By mounting accessories like hydraulic drum drives, drum disc brake etc. the payload will be reduced according on the weights of the accessories.

Cable trailer hydraulic loading for lorry transport up to 25 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below. *Payload without accessory. By mounting accessories like hydraulic drum drives, drum disc brake etc. the payload will be reduced according on the weights of the accessories.

Adapter for the coupling height to the truck for all KVH cable drum trailers.

Small drum suspension for drums below D 1800-800 mm for all KVH-types, but not for driving these drums by hydraulic drum drives.

For hydraulic drive of such small drums of diam. 800-1800 mm, see next table, drum support 346600 TAV 100, can also be retrofitted.

Additional support in front of all trailers KVH for winding and unwinding small drums D 800-1800 of maximum 2t. Winding by the hydraulic drum drives of the trailers. One set exists of one right-hand and one left-hand support. For loading these drums a lifting equipment is necessary. Non additional drum shaft is necessary, the standard shaft of the trailer can be used.

Surcharge for rotating drum shafts of steel tubes. With rotating shafts cable drums unwind much easier. We recommend also the use of the cones to unroll the cable drum true. With this steel drum shaft the drum disc brake can be used.

Surcharge for rotating drum shafts of aluminium. With rotating shafts cable drums unwind much easier. We recommend also the use of the cones to unroll the cable drum true. With this aluminium drum shaft the drum disc brake can not be used.

Cable drum drive both sides, forwards and reverse, with engine on the trailer for all cable trailers KVH 4.5-7.3. Hydraulically pressing of the driving wheels on the drum flange, lifting and lowering of the drum. Remote control equipped with 6 m cable. (Radio control as option see below code 351608 TOF 600)

Radio control for drum drive and drum lifting for all cable trailers KVH 4.5-7.3 for all operations drum lifting and lowering, pressing the drive rollers to the drum, winding and unwinding the cable with control of the speed.

Cable drum drive, forwards and reverse, for external hydraulic connection of the towing vehicle. For all cable trailers KVH 4.5-7.3. Hydraulically pressing of the driving wheels on the drum flange, lifting and lowering of the drum. Remote control equipped with 6 m cable. (Radio control as option see below code 351608 TOF 600)

Cable drum disc brake with drum fork for controlled unwinding of cable or line drums. Hand mechanical setting of the braking force. To use it with KVH-types cones code 315430, ZKO 76 are necessary.

Clamps, new construction reinforced, hinged, for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. Hinged version, steel galvanized. Width 61 mm.

Locating cone for drum shafts made of cast steel including clamp. With several steps for drum bores according to DIN.

2 pieces need to be ordered