The DuctRepair-Boxx is a precision tool set that offers a solution for the sustainable repair of damaged, occupied subducts without endangering the intact cables.
By using the newly developed, professional precision tools, damaged areas in the subducts for outside diameters of 7/10/12/14/16/20 mm and wall thicknesses of 0.75/1.0/1.1/1.3/1.5/2.0/2.5 mm can again be repaired without transition so that they can be blown in and out. The repair area is thus sealed pressure-tight and remains unrestrictedly calibratable and blowable.
The precision tools allow a longitudinal as well as a circular cut of the subduct without damaging the fibre optic cable running through it. The DuctRepair-Boxx does not include DuctRepair blocks in the scope of delivery, please order these separately as required. Delivery takes place in a robust case set. The standard scope of delivery includes the following parts:
DuctTool lengthwise cutter set. Tool and inserts to cut covered subducts lengthwise.
DuctTool circular cutter set. Tool and inserts to cut all around covered subducts.
Subduct slitter MLS 20.
DuctMarker, consisting of two markers for locating the repair site.
Hexagonal spanner with T-handle wrench size 3 for installation DuctRepair Block.
Hexagonal spanner with T-handle wrench size 2,5 for adjusting the tools.
Permanently buriable block for repairing damaged, already occupied subducts for different diameters with repair lengths (rep. l.) of 200 and 400 mm. The pipe system remains sustainably inflatable and deflatable after repair by the DuctRepair block.
Suitable for permanent burial.
Is applied seamlessly to the outer and inner diameters of the subduct.
High tensile strength.
Pressure tightness 15 bar at max. 40 °C for one hour.
Professional and highly precise cutting tool made of anodised aluminium to cut damaged subducts lengthwise. The precise adjustment feature allows the cut to be set to any size of damaged subduct without damaging the blown-in fibre optic cable. Delivery takes place in a robust case set with foam inlay.
Longitudinal cutter base body incl. Knife.
Depth of cut adjustment according to wall thickness of the subduct.
Outer dimension star for setting the outer diameter.
Two spacers for precise adjustment of the cutting length.
Hexagonal spanner with T-handle wrench size 2,5 for adjusting the tools.
Professional and high-precision cutting tool made of anodised aluminium to cut damaged subducts all around. The precise adjustment feature allows the cut to be set to any size of damaged subduct without damaging the blown-in fibre optic cable. Die Delivery takes place in a robust case set with foam inlay.
Round cutter basic body incl. knife.
3x support prism for tube diameters 7-10 / 12-14 / 16-20 mm.
6x circular cutting blades for wall thicknesses 0.75 / 1.0 / 1.3 / 1.5 / 2.0 / 2.5 mm.
Hexagonal spanner with T-handle wrench size 2,5 for adjusting the tools.
Wall thickness 1.1 mm can be cut with cutting tool 1.0 mm.
Set of two markers for marking and locating a damaged area by attaching the marker to a subduct, KR pipe or pipe union. Contains passive RF reflector that responds to the emitted signal from tracking devices.
Colour orange for telecommunication with common frequency 101.4 kHz.
Protection class IP68.
Cable tie 7 mm wide and 2 mm thick.
Locating depth horizontal position 0.6-1.0 m, vertical position 1.5-2.0 m.
This cable conduit saw SRS 6.1 is a further development of the proven SRS 6. The saw is suitable for cutting occupied and unoccupied cable conduits without damaging internal cables or subducts. The saw is suitable for conduits at an outer diameter of 32-150 mm and at a max. wall thickness up to 6 mm. The saw can precisely cut lengthwise and crosswise and can also precisely cut windows into the cable conduit. Especially for long cuts on the cable conduits which are necessary for cable line redirections the great benefits of this saw pay off.
The cutting depth can be precisely adjusted to a 1/10 of a millimetre by an adjustment mechanism thus the cables inside the cable conduit are well-protected. The cutting depth has always to be set 0,2 mm less than the conduits wall thickness. The remaining very thin plastic membrane will be removed by a lifter tool thus the cable is also protected during this final step.
The conduit guiding plates allow a high safety at work as well as accurate cuts. The guiding plates are available for the below mentioned conduit-diameters. The cordless saw is handy and small in order to be fit for application also in narrow working conditions its weight is below 2 kg. Included in delivery are the following parts:
Accu-saw with high-quality blade hard metal equipped and 3 accus with 1 charger
Precise pre-adjustment of the cutting depth, 1/10 mm accurate sliding calliper.
Lifter for the window-cutting rest
Packed and delivered in robust box, 445x355x255, weight app. 6,5 kg
Only approx. 1,9 kg of weight for comfortable application
Sub duct slitter for lengthwise slitting and circumferential slitting of plastic conduits and cable covers. Cutter for empty and occupied subducts and dismantler for multiducts. Special thin and grinded turning guide shoe blade. Special shape of handle reduces danger of injury. Incl. 2 spare turning blades, e.g. 4 single blades.
