1 | Cable supporting grips for wind energy plants
Cable supporting grips especially for wind energy plants. With 1 lateral loop, galvanized Bowden wire. All Vetter cable grips are handmade therefore of high flexibility. They adapt easy at any difference in cable diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length, or in stainless steel are available. For safe and strain relieved cable supporting.
  • L1 = the lengths without cables in. L2 = total length included the loops.
  • The real length mounted on the cable can be much shorter, depending on the cable diameter.
  • All loops are equipped with galv. steel thimbles.
  • B = internal diameter of the loop
  • D = thickness of the loop
  • kN = minimum breaking load
,Cable-pulling-grips,Cable-supporting-grips,Cable-strainrelief-grips,Windpower-grips,Cable-connection-grips,Hosesecuring-grips,Cable-stockings,Chines-fingers,Tire-câbles-tracteurs,Grips-chausettes-câble,Mallas-grips-tiracables,Mallas-grips-de-seguridad-para-tubos-flexibles
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeC-D B D kN L1/L2 kg
253050 MW 10/18-10 15 11 6,6 500/650 0,08
253060 MW 15/110-15 18 11 10,2 500/670 0,10
253080 MW 20/115-20 18 11 12,9 500/720 0,15
253100 MW 25/120-25 18 12 20,4 500/750 0,16
253120 MW 30/125-30 18 12 24,3 500/750 0,17
253140 MW 40/130-40 18 12 35,1 500/800 0,22
253160 MW 50/140-50 20 13 48,0 800/1000 0,35
253180 MW 60/150-60 20 16 48,0 800/1000 0,45
253200 MW 70/160-70 20 16 63,0 800/1200 0,55
2 | Cable supporting grips for wind power plants, 1 loop, stainless steel
Cable supporting grips for wind power plants, 1 lateral loop. Stainless steel Bowden wire V4A/1.4401 with copper clamp. All Vetter cable grips are handmade and therefore of high flexibility. They adapt easy at any difference in cable diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For strain-relief suspension of cables in plants.
  • L1 = the lengths without cables in. L2 = total length included the loops.
  • The real length mounted on the cable can be much shorter, depending on the cable diameter.
  • All loops are equipped with stainless steel thimbles.
  • B = internal diameter of the loop
  • D = thickness of the loop
  • kN = minimum breaking load
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeC-D B D kN L1/L2 kg
25330005 MWE 10/18-10 15 11 6,6 500/630 0,08
25331005 MWE 15/110-15 18 11 10,2 500/640 0,10
25333005 MWE 20/115-20 18 11 12,9 500/690 0,15
25335005 MWE 25/120-25 18 12 20,4 500/690 0,16
25337005 MWE 30/125-30 18 12 24,3 500/690 0,17
25339005 MWE 40/130-40 18 12 35,1 500/760 0,22
25341005 MWE 50/140-50 20 13 48,0 800/1000 0,35
25343005 MWE 60/150-60 20 16 48,0 800/1000 0,45
25345005 MWE 70/160-70 20 16 63,0 800/1200 0,55