Steel rope hoists, ratched hoists, rope-dynamometers

1 | Steel rope hoists

PDF-Sheet

Steel rope hoists, lightweight alu-construction for pulling and hoisting works. Officially approved by safety institution. Including 20 m special steel rope with hook. Weight mentioned in the table below is for device inclusive 20 m steel rope.

,Steel-rope-tensioners,Pulley-blocks,Ratchet-chain-hoists,Overhead-line-catenaries-dynamometers,Poulie-mouffle,Dynamomètre-lignes-aériennes,Ternal-manual-cuerda-de-cáñamo,Dinamómetros-lineas-aéreas

,,,

Code	Type	Pull force	Rope	Hook load	L/W/H mm	kg
550280	SZA 08	8,0 kN	8,4	800 kg	420x60x230	15,50
550310	SZA 16	16,0 kN	11,5	1600 kg	550x80x280	26,00
550340	SZA 32	32,0 kN	16,0	3200 kg	680x90x330	44,60

2 | Ratchet chain hoists

PDF-Sheet

Ratchet chain hoists, especially lightweight construction, with round link chains. Chain release device. Swivelling hooks. Lift 1,50 m.

,,,

Code	Type	Pull-lift	Chain lift	Dimension	kg
550580	KRZ 02	250 kg	1,50 m	270x55x90	2,20
550581	KRZ 05	500 kg	1,50 m	270x55x90	2,80
550582	KRZ 07	750 kg	1,50 m	295x111x142	7,00
550584	KRZ 15	1500 kg	1,50 m	380x140x166	11,00
550586	KRZ 30	3000 kg	1,50 m	420x174x184	14,90

3 | Pulley blocks, 3 fold

PDF-Sheet

Pulley blocks, 3 fold with 20 m of hemp wire, 3-grooved rollers, swivelling hook.

,,,

Code	Type	Pull-lift	Roller-D	Rope	kg
550660	FLZ 60	250 kg	60	10	2,60
550670	FLZ 70	300 kg	70	12	4,30
550680	FLZ 80	350 kg	80	12	4,40

4 | Dynamometer for catenaries accuracy ± 0,6 %

PDF-Sheet

Dynamometer for catenary and overhead line works. High accuracy of ± 0,6 %. With 2 fork heads. Pull results on a black and white drum type scale. Overload protection. Complete body protected in a rubber joint. kN = Minimum Breaking Load

,,,

Code	Type	Cap.	Scale	SWL	Fixing	D/L	kg
550035	DBA 02	0-250 kg	5 kg	1250 kg	Fork-Eye	70/289	1,90
550065	DBA 05	0-500 kg	10 kg	2500 kg	Fork-Eye	70/289	1,90
550095	DBA 10	0-1000 kg	20 kg	5000 kg	Fork-Eye	70/289	1,90
550105	DBA 15	0-1500 kg	20 kg	7500 kg	Fork-Eye	70/292	2,40

5 | Dynamometer for overhead lines ± 0,6 %

PDF-Sheet

Dynamometer for overhead line works. Accuracy of ± 0,6 %. Pull results on speedometer casing. MBL = Minimum Breaking Load

,,,

Code	Type	Cap.	Scale	SWL	Fixing	D/L	kg
550090	DYB 10	0-1000 kg	20 kg	5000 kg	Eye-Eye	50/266	1,90
550120	DYM 20	0-2000 kg	25 kg	10000 kg	Eye-Eye	86/395	7,80

6 | Dynamometer for overhead lines ± 3,0 %

PDF-Sheet

Dynamometer for overhead line works. Accuracy of ± 3,0 %. Pull results on speedometer casing. MBL = Minimum Breaking Load

,,,

Code	Type	Cap.	Scale	SWL	Fixing	D/L	kg
550190	TM-05	0-500 kg	10 kg	1500 kg	Eye-Eye	65/140	0,90
550192	TM-10	0-1000 kg	20 kg	3000 kg	Eye-Eye	65/140	1,00
550194	TM-20	0-2000 kg	50 kg	6000 kg	Eye-Eye	65/150	1,10
550196	TM-30	0-3000 kg	50 kg	9000 kg	Eye-Eye	75/250	1,90
550198	TM-50	0-5000 kg	50 kg	15000 kg	Eye-Eye	90/250	2,60