Navigationen überspringen, zum Seiteninhalt
1 Cable drum and coiling machines

PDF-Sheet
Cable drum and coiling machines. For use in cable stores at distributors, industrial plants etc. Machine in stable steel construction. Electro-hydraulic drum and coil winder lifting by 2 arms. Cable traversing with ball bearings ready to mount length measuring equipment LM 40 - LM 60, moving by hands. Electronic pre-set counter included as standard equipment. Included safety cage with automatic switch-off. Easy displacement through big wheels. Further accessory see below.
 
• For winding from drum to drum or von drum to coils.
• Frequency controlled drive with soft start and soft stop
• Electro-hydraulic drum lifting and hand clamping centric seals.
• The hydraulic cable cutter can be connected to the electro hydraulic.
Cable drum machines,coiler,spooler,322510
CodeTypeC-D Drum-D kW/V rpm Cap. L/W/H m kg
322510 TR 125FH10-35 600-1250 1,5/230 5-80 1000 kg 2,6/1,7/1,8 460,00
2 Cable drum and coiling machines

PDF-Sheet
Cable drum and coiling machines. For use in cable stores at distributors, industrial plants etc. Machine in stable steel construction. Electro-hydraulic drum and coil winder lifting by 2 arms. Cable traversing with ball bearings ready to mount length measuring equipment LM 40 - LM 60, moving by hands. Electronic pre-set counter included as standard equipment. Included safety cage with automatic switch-off. Easy displacement through big wheels. Further accessory see below.
 
• For winding from drum to drum or von drum to coils.
• Frequency controlled drive with soft start and soft stop
• Drum lifting by hand spindle.
Cable drum machines,coiler,spooler,322508
Cable drum machines,coiler,spooler,322516
CodeTypeC-D Drum-D kW/V rpm Cap. L/W/H m kg
322508 TR 125F10-35 600-1250 1,5/230 5-80 1000 kg 2,4/1,6/1,8 400,00
322516 TR 145F10-40 600-1400 2,2/400 5-80 1500 kg 2,4/1,6/1,9 500,00
3 Cable and wire length measuring machines

PDF-Sheet
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
 
• Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
• The measuring accuracy of all LM machines is of ± 0,2 %.
• The accuracy refers to a cable length of at least 20 m.
• Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
• In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322742
Cable length measuring machines,322743
CodeTypeC-D St-rope L/W/H mm kg
322742 LM 403-40 no 550/300/420 28,50
322743 LM 40S3-40 3-22 550/300/420 28,50
4 Roller bow

PDF-Sheet
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM. Steel rollers D 25 mm.
 
• Type RB 4090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers D 25 mm.
• RB 4018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers D 25 mm.
Cable length measuring machines,322783
Cable length measuring machines,322784
CodeTypeSuitable for C-D Passage Deviation L/W/H mm kg
322783 RB 4090LM 40/40S max. 40 mm 45x45 mm 90° 400x180x380 10,10
322784 RB 4018LM 40/40S max. 40 mm 45x45 mm 180° 400x180x450 11,00
5 Conformity assessment for LM 20-80

PDF-Sheet
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.
Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
Kabellängenmessgerät,Kabellängenmeßgerät,322790
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
6 Declaration of Conformity for LM 20-80

PDF-Sheet
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
 
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
 
• The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Calibration of length meters,322792
CodeType kg
322792 KT 001 0,01
7 Calibration of length measuring machines LM 20-80

PDF-Sheet
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.
Calibration of length meters,322795
CodeType kg
322795 KA 001 0,02
8 Verification of LM 20-80 before 2015

PDF-Sheet
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.
Kabellängenmessgerät,Kabellängenmeßgerät,322796
CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
9 Electronic cable traversing

PDF-Sheet
Automatic electronic cable traversing unit to TR 125-256. Adjustment return points and cable diameter electronic with key button and rotary switch on the control panel.
Cable traversing,322835
Cable traversing,322836
CodeTypeSuitable for For C-D kg
322835 REL 26TR 125 3-40 mm 18,00
322836 REL 36TR 145-256 10-80 mm 20,00
10 Layering arms

PDF-Sheet
Layering arms on cable length measuring machines LM 40-LM 80, for better cable traversing on winding machines TR/TRG 125-256, especially for soft or thin cables.
Layering arms,322785
CodeTypeSuitable for On machines kg
322785 VA 45LM 40-80 TR/TRG 160-256 8,00
11 Control arm

PDF-Sheet
Control arm with nivomat to prevent from damage of Fibre Optic and sensitive CU-cables up to D 12 mm during winding process. Light control arm of aluminium, length approx. 1050 mm, bending radius R 150 mm, with adjustable weights to the winding process. Arm is easy removable for winding of heavier cables.
Layering arms,322723
CodeTypeSuitable for For C-D Length kg
322723 SAA 40LM 40 12 mm 1050 mm 10,00
12 Laser-Pointer

PDF-Sheet
Laser-Pointer for easy and accurate adjustment of cable traversing on cable winding machines. Fixing on layering arm or length measuring device LM 20-80
Layering arms,322839
CodeTypeColour To mount kg
322839 LP 10red on LM 20 - 80 5,00
13 Hydraulic centre sleeve tightener

PDF-Sheet
Hydraulic centre sleeve tightener, accessory for drum winding machineries TR 125-165 FH
Hydraulic centre sleeve tightener,322840
CodeTypeSuitable for kg
322840 PS 4TR 125-165 50,00
14 Hand cutter

PDF-Sheet
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines LM 20-40.
Hand-cable-cutter,322810
Hand-cable-cutter,322812
Hand-cable-cutter,322815
Hand-cable-cutter,322816
CodeTypeSuitable for For C-D St-ropes kg
322810 HK 35LM 20 35 mm no 5,80
322812 HS 35LM 20S 10 mm 10 mm 6,30
322815 HK 40LM 40 40 mm no 5,30
322816 HS 40LM 40S 14 mm 14 mm 4,80
15 Cable cutting head, hydraulic

PDF-Sheet
Cable cutting head, hydraulic for mounting on cable length measuring machines types LM, for cutting insulated CU- and AL-cables, not for steel ropes.
Cable cutting head, hydraulic,322818
Cable cutting head, hydraulic,322821
CodeTypeSuitable for For C-D St-ropes kg
322818 HK 40HLM 40 40 mm no 11,00
322821 HK 60HLM 60 60 mm no 14,50
16 Cutting-off machine

PDF-Sheet
Cutting-off machine for cables and ropes, suitable for CU, Al, ST. Range of diameter see table below.
Cutting-off machine,322802
Cutting-off machine,322804
CodeTypeSuitable for For CU/AL cable St-ropes kg
322802 TD 40LM 40 up to D 22 mm up to D 22 mm 11,00
322804 TD 60LM 60 up to D 32 mm up to D 32 mm 14,50
17 Coil winder collapsible

PDF-Sheet
Coil winder collapsible, cylindrical, adjustable in width. For fast serving of cable rings, including eccentric clamp for fixing the cable head on the coil winder.
Coil-winder-adjustable,collapsible,3226621
Coil-winder-adjustable,collapsible,3226631
Coil-winder-adjustable,collapsible,3226641
CodeTypeSuitable for Dimension Cable D/m Cap. kg
3226621 RW 36VKTR 125-256 D 800/350, int. 90-200 10/590, 30/60 100 kg 32,00
3226631 RW 46VKTR 125-256 D 900/450, int. 100-250 10/880, 30/100 100 kg 35,00
3226641 RW 56VKTR 125-256 D 1000/460, int. 100-250 15/530, 30/130 100 kg 37,00
18 Cable loops

PDF-Sheet
Cable loops for fixing the cable head to the coil winder for winding procedure.
Cable loops,322870
Cable loops,322871
CodeTypeSuitable for Length Steel rope-D kg
322870 KS 300all coil winders 300 mm 2,0 mm 0,02
322871 KS 500all coil winders 500 mm 2,5 mm 0,03
19 Centring sleeves for drums

PDF-Sheet
Standard all drum winding units are equipped with the following centring sleeves:
 
• TR/TRG 125-166 standard for centre holes of D 80 mm
• TR/TRG 200-256 standard for centre holes of D 80 and D 125 mm.
• For other centre holes special sleeves see below have to be ordered.
Locating-cones,322859
Locating-cones,322860
Locating-cones,322861
Locating-cones,322862
Locating-cones,322864
Locating-cones,322867
CodeTypeSuitable for Fixing Form For hole kg
322859 ANZ 125TR/TRG 200-256 D 80 mm cylindrical D 125 mm 4,00
322860 ANZ 110TR/TRG 125-256 D 80 mm cylindrical D 110 mm 6,00
322861 ANZ 107TR/TRG 125-256 D 80 mm cylindrical D 100+70 mm 6,50
322862 ANZ 080TR/TRG 125-256 D 40 mm cylindrical D 80 mm 4,00
322864 AKZ 66TR/TRG 125-256 D 40 mm conic D 85-35 mm 5,40
322867 AKK 65TR/TRG 125-256 conic conic D 85-35 mm 7,20
20 Moving equipment, mech.

PDF-Sheet
Moving equipment for mechanical lift of the winding machine and for displacement by a hand draw bar.
Moving equipment, mech.,322962
CodeTypeSuitable for Suitable for Lifting Running kg
322962 HG 90TR 125-145 TR 146-166 Tilting draw bar manual 18,00
21 Moving equipment, mech.

PDF-Sheet
Moving equipment for mechanical lift of the winding machine and for displacement by a hand draw bar.
Moving equipment, mech.,322964
CodeTypeSuitable for Lifting Running kg
322964 HG 125ABTR 165-250 Tilting draw bar manual 17,00
22 Moving equipment, hydr.

PDF-Sheet
Moving equipment for electro-hydraulic lift of the winding machine and for displacement by a hand draw bar.
Moving equipment, hydr.,322965
Moving equipment, hydr.,322966
CodeTypeSuitable for Suitable for Lifting Running kg
322965 HG 100HITR 125-165 TR 146-166 Hydraulic manual 25,00
322966 HG 125HITR 200-250 TR 206-256 Hydraulic manual 26,00
23 Moving equipment, hydr.

PDF-Sheet
Moving equipment for hydraulic lift of the winding machine and for displacement by electric motor drive.
Moving equipment, hydr.,322974
CodeTypeSuitable for Suitable for Lifting Running kg
322974 HG 200HITMDTR 100 TR 250-256 Hydraulic Electro motor 65,00
Seitenende erreicht, zum Seitenanfang