The first fully-electric, compact and lightweight cable capstan winch on trailer with strong noise reduction, emission-free motor and excellent performance.

This new fully-electric winch enables emission-free, quiet work with the usual pulling force of 30 kN and independently for up to four hours. This makes it particularly suitable for use in urban areas, tunnels, galleries or especially for working at night. Special permits, exhaust discharges and more are no longer necessary.

Radio communication for the operator at the winch is greatly facilitated by the low noise level. Maintenance of the winch is very low maintenance and items such as filter changes, oil changes, spark plugs, etc. are no longer necessary. The winch can be charged via a generator, a house connection or a charging point for e-vehicles.

Prepared for electronic assistant MP 50 as a tractive force measuring and recording device for simple and safe machine operation. Permanently monitors the pulling force and stops the winch when the preset pulling force is reached. (See more on MP 50 below). The winch uses the proven double capstan drive. The electronic measuring and recording device MP 50 must be ordered separately. Supplied as standard with battery heater for working even at minus temperatures, with 5-year warranty on battery and charger, incl. swirl catcher - also called swivel - with plain bearing.

A charging cable for charging stations for electric vehicles and a radio remote control FST 50E are optionally available.

For further accessories see below.

Radio communication for the operator at the winch is greatly facilitated by the low noise level. Maintenance of the winch is very low maintenance and items such as filter changes, oil changes, spark plugs, etc. are no longer necessary. The winch can be charged via a generator, a house connection or a charging point for e-vehicles.?
For further accessories see below.

Cable capstan winch, mechanical drive through Honda petrol engine. Supply including a swivel with friction bearing. Other accessory see below.?
This winch can be selected with a suitable pulling force measuring or registration device.

Cable capstan placing winch, hydraulic drive through Honda petrol or Hatz diesel engine. Supply including a swivel with friction bearing. Other accessory see below.?
This winch can be selected with a suitable pulling force measuring or registration device.

Electronic recorder MP 50 as pulling force measuring and registration device for cable capstan winches. For safe and simple machine operation. Permanently monitors the pulling force and stops the winch when the pre-set pulling force is reached.?
Registration and logging of data as well as PDF report output incl. representation as diagram via USB inter-face or wireless transfer via WiFi to any recei-ving device such as a tablet or notebook.

The MP 50 is supplied in a separate case. The battery is charged during work via the engine battery or by using one of the supplied 12 V or 230 V charging cables.

Input and display of the most important parameters such as tractive force, speed, distance, GPS position and cable data on a 7-inch touchscreen.

Mechanical dynamometer ZK and digital length and speed counter VL 20 for cable capstan winches. Stops the winch when the pre-set pulling force is reached.

Without registration and logging of data.

Installed on all TL 1118 - TL 5040 in the DY version. In the MPDY version installed together with an electronic assistant MP 50.

Upgrade of an existing winch with MP 30 electronic recorder to MP 50 electronic assistant as pulling force measuring and registration device for cable capstan winches. Incl. all necessary mechanical/electronic/control modifications.?
For safe and simple machine operation. Permanently monitors the pulling force and stops the winch when the pre-set pulling force is reached.

The MP 50 is supplied in a separate case. The battery is charged during work via the engine battery or by using one of the supplied 12 V or 230 V charging cables.

Please note that an existing radio remote control cannot be used with the MP 50. Retrofitting includes the preparation for the connection of an optional new radio remote control.?
Input and display of the most important parameters on a 7” TFT touchscreen, such as:

Digital radio remote control FST 50 for cable capstan winches existing of receiver on the winch and mobile transmitter with following control displays/functions:

LCD display - Emergency stop mushroom pushbutton - Toggle switch for pulling/removing (dead man's switch) - Speed potentiometer

LCD display for indication of:?
Current pulling force - Max. permissible pulling force - Speed - Distance Including adaptation of the winch electronics and mechanical switch for manual and remote control. Supplied in case with 2 exchangeable batteries, carrier bag with belt and charging adapter.

Charging cable for charging at standard charging points for electric vehicles.

Car change coupling for ball D 50 mm incl. installation kit for all types.

Interchangeable eye coupling, hole-D 40 mm, including screws for cable capstan winches.

Rope connecting set for solder in ropes, for pulling forces up to 30,0 kN, 5 parts for rope-D 6-9 mm.

Steel rope for cable capstan winches, low torsion quality, galvanized, rated strength of wire 1960 N. kN = Minimum Breaking Load

Swivels with friction bearings, turnable connector between winch rope and cable grip. The friction bearing guarantees that the swivel reduces rotation and torsion with increasing pulling force. Only for underground cables, not suitable for pulling overhead lines. kN = Minimum Breaking Load

Steel rope slings for connection from swivel to the cable grips. kN = Minimum Breaking Load

Shackle galvanized, special slim version with slotted screw for easy passing ducts and cable rollers. SWL of all shackles includes a safety factor of 17