Hose securing grips with 2 loops, galvanized Bowden wire. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Hose securing grips with 2 loops on each end. This type is mainly used for short hoses, where two single grips would be to long. For all water-, hydraulic or other high pressure hoses. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Material galvanized Bowden wire. Any other length or in stainless steel are available in short term. Please ask for offers.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Hose securing grips with 2 loops, galvanized Bowden wire. Lateral divided with binding strand. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Hose securing grips with 2 loops. Stainless steel Bowden wire V4A/1.4401 with copper clamp. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length are available.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SCE 30 loops without thimbles, from SCE 40 loops with stainless steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Hose securing grips with 2 loops. Lateral divided with binding strand. Stainless steel Bowden wire V4A/1.4401 with copper clamp. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SCE 30 loops without thimbles, from SCE 40 loops with stainless steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Hose securing loops for hose to gun or hose to hose. They adapt easy at any difference in hose diameter and are therefore simple to handle. Available in galv. steel or in stainless steel wire V4a, see table below. For all water-, hydraulic or other high pressure hoses. Minimum Braking Load for all these loops = 17,0 kN.