Units for in-house installation of cable Ø 0,8-4,0 mm
1 | New Product - UltimaZ E25 for in-house installation, professional device
ULTIMAZ E25, blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 300 m. The ULTIMAZ E25 is a consequent further development of the version ULTIMAZ P2P. The comfort features E25 is also designed for in-house installation of mini cables and fibres. The performance is improved and its handling is comfortable.
The battery operated electric drive enables an eight hours operation. The pushing force can be adapted electronically by the operator in six steps from 5 to 22 N. The correct pushing force is found out as usual by crash-tests. This precise adjustment of the pushing force is the basic principle to avoid damages to the delicate mini cables and fibres. The ease of use is increased by the automatic contact pressure of the driving roller system. The contact pressure is automatically determined in dependency of the adjusted pushing force. The maximum speed of 80-180 m/min. is also controlled electronically in dependency of the pushing force.
In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.
Accessory and performance see technical details below. Without cable and duct inserts, see accessory below.
The battery operated electric drive enables an eight hours operation. The pushing force can be adapted electronically by the operator in six steps from 5 to 22 N. The correct pushing force is found out as usual by crash-tests. This precise adjustment of the pushing force is the basic principle to avoid damages to the delicate mini cables and fibres. The ease of use is increased by the automatic contact pressure of the driving roller system. The contact pressure is automatically determined in dependency of the adjusted pushing force. The maximum speed of 80-180 m/min. is also controlled electronically in dependency of the pushing force.
In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.
Accessory and performance see technical details below. Without cable and duct inserts, see accessory below.
- Fast and easy starting operation in any spot
- The battery operated electric drive with electronic controlling
- The operator does not need large cable blowing experience
- Small dimension of 80x255x195 mm, weight only approx. 4,3 kg of the basic machine
2 | UltimaZ P2P for in-house installation, start-up device
UltimaZ P2P blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 200 m. The UltimaZ P2P makes it possible to continue the last mile from the underground floor to all flats. Drive through an accu-driven hand-drill, accessory.
In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.
The torque can be adjusted by fine steps from 0-20 N. This avoids largely damages of the cables. Accessory and performance see technical details below. Without cable and duct inserts, see accessory and techn. details below.
In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.
The torque can be adjusted by fine steps from 0-20 N. This avoids largely damages of the cables. Accessory and performance see technical details below. Without cable and duct inserts, see accessory and techn. details below.
- Fast and easy starting operation in any spot
- Feeding drive through accu drilling machine of 500 t/min. not included
- The operator does not need large cable blowing experience
- Small dimension of 210x75x135, only approx. 2,4 kg of weight for comfortable application
3 | Compressed air hose
4 | Air connector for compressor
5 | Air regulator
6 | Pressure wheels to P2P
7 | Drive wheels to P2P
8 | Drive wheels to P2P
9 | Duct insert divisible for P2P
Duct insert divisible for P2P, for duct-OD 3-12 mm and cable-Ø 1,8-4,0 mm, incl. 6 duct seals.
10 | Cable insert divisible for UltimaZ P2P
11 | Duct insert not divisible for P2P
12 | Cable insert not divisible for UltimaZ P2P
13 | Cable sealing-set to P2P
Cable sealing-set to UltimaZ P2P, to RET 3018 up to RET 12040, sets of see table below
14 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by UltimaZ P2P, by MicroJets PR/PRM 196. Performance and techn. details see below.
- The Lubricator guarantees an uniform lubrication on the whole length duct length.
- With the Lubricator the performance is approximatively 20-40 % higher.
- Weight machine only 0,6 kg
15 | Lubricant for FOC
Micro Jetting Lube, lubricant for blowing-in fibre optic cables. Excellent lubricating effect. Adheres to the duct wall and leaves the cable nearly dry, an advantage for over blowing and working in cascades with further blowing machines. Consumption approx. 10 ml per 1000 m at duct-ID 10 mm. For other duct-ID analogue
For lubrication unique and ultimate classification, Water pollution class - non-hazardous, acc. to VCI-Conception. Safety data sheets are available.
16 | Duct cleaning sponge
17 | Compressor electric motor
Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for UltimaZ P2P.
- Electric motor 1,1 kW, 230 Volt, compressor dimensions: 560/350/560
- Capacity 100 l/min. at 12 bar.
- Soundproof hood 71 dB(A).
- Pressure reservoir 4 litre
18 | Compressor electric motor
Compressor with electric motor. For blowing-in fibre optic micro cables, fibres and bundle fibres. Mounted on 2 wheels, which enables the transport on stairs for one person alone. Suitable for UltimaZ P2P.
- Electric motor 1,5 kW, 230 Volt, compressor dimensions: 570/440/1050 mm.
- Sound insulation bonnet, sound pressure level 79 dB(A).
- Constant, infinitely adjustable delivery pressure due to new piston compressor principle.
- Oil-free operation, no oil change, no check, oil- and water-free air.
19 | Cable unwinder
Cable drum unwinder for very small drums with one or two flanges. The unwinder can accommodate a wide variety of drums with a bore from 20 mm by combining different cones. Due to its low weight of only 6.4 kg, it is very handy and yet has a high stability. This makes it very safe to use, e.g. for in-house cabling.
- For drum D up to 300 mm and drum width up to 220 mm, weight max. 5 kg
- Clamping bearings for easy running and small pull-off forces
- All cones are included and attached to the unit
20 | Cable unwinder
Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.
- Collapsible for easy transportation to the site.
- Easy movable with the drum through big rubber coated wheels.
- For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
- As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.