Compressors for fibre optic cable installation
1 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for CableJet and SuperJet and for duct ID up to 41 mm. Mounted on single axle trailer with height adjustable overrun drawbar. Incl. Diesel-Oxidation filter and particle filter. Emission standard V and US-standard EPA Tier 4. Equipped with Telematics 36 @ Mobilair.
  • Deutz Diesel-engine, 105 kW. Compressor dimension: 5180x2130x1790
  • Flow rate 10,70 m³, at 12 bar working pressure
  • With integrated after cooler and water separator.
  • Air discharge valves: 1 x G 1 1/2" and 3 x G 3/4"
,Compressors,Air-pneumatic-hose,Compresseur,Tuyau-flexible,Compresores,Tubo-flexible
CodeTypeAir Press. D-ID C-D kg
960127 M 1259,7-11,5 m³/min. 14-7 bar, s. above to 41 to 30 2.088,00
2 | Pressure release valve
Pressure release valve with sound absorber for compressors. Max. pressure 15 bar.

,,,
CodeTypePress. For compressor kg
096010038 EVK 3415 bar MK 17, M 27, M 59 and M 125 1,30
3 | Pressure release valve
Pressure release valve with sound absorber for compressors. Max. pressure 15 bar.

,,,
CodeTypePress. For compressor kg
275220 EVK 1515 bar M 125 2,70
4 | Compressed air hose
Air hose, special flat, for blowing-in fibre optic cables and subducts. Complete with screw fittings.

,,,
,,,
,,,
CodeTypeSize Working Bursting Length kg
410420 KFS 15/1,5"1 1/2" 20 bar 60 bar 15 m 9,12
231660 KFS 15/1"1" 15 bar 45 bar 15 m 4,70
23165910 KFS 10/1"1" 15 bar 45 bar 10 m 3,50
5 | Air regulator valves for sub-ducts
Air regulator valves with tripod and 5 m exit hose. Entry hose as accessory. An important regulator for calibration and pressure tests of cable conduits and to pressure of subducts prior blowing in conduits.

,,,
,,,
CodeTypePress. Hose kg
23163016 DLR 160-16 bar Exit 5 m 11,30
231655 KFS 5/10-16 bar Entry 5 m accessory 2,20
6 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for MiniJet, for duct ID up to 41 mm. Mounted on single axle trailer with height adjustable drawbar, without overrun brake.
  • Hatz Diesel-engine, 42 kW. Compressor dimension: 4000x1540x1445 mm.
  • Flow rate 3,8 m³, at 14 bar working pressure
  • With integrated after cooler and water separator.
  • Air discharge valve: 2 x G 3/4"
,,,
CodeTypeAir Press. D-ID C-D kg
960123 M 593,8 m³/min. 14 bar 3-16,0 to 10 906,00
7 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for MiniJet, for duct ID up to 20 mm. Mounted on single axle trailer with height adjustable drawbar, without overrun brake.
  • Kubota Diesel-engine, 17,9 kW. Compressor dimension: 3245x1260x1330 mm.
  • Flow rate 1,6 m³, at 14 bar working pressure.
  • With integrated after cooler and water separator.
  • Air discharge valve: 2 x G 3/4" (shown with option EVK 34)
,,,
CodeTypeCompr. air Press. D-ID C-D kg
960120 M 271,60 m³/min. 14 bar 3-16,0 bis 10 600,00
8 | Compressor petrol engine
Compressor with petrol engine and after cooler. For blowing-in fibre optic mini cables, fibres and bundle fibres. Suitable for all MicroJets and for MiniJet P 02. The external after cooler reduces the compressed air temperature approx. 8° C above ambient temperature. The compressor is equipped with a sound absorption cover. It is portable by two pneumatic wheels.
  • With Honda-petrol engine 15,50 kW. Dimension: 1080x800x796
  • Flow rate 1000 l/min. at 15,0 bar working pressure
  • With separate after cooler electrical feeded by the compressor. Air discharge valve: 1 x G 3/4"
  • As accessory see tiltable support for after cooler, table below.
,,,
CodeTypeAir Press. D-ID C-D kg
9601184 MK 17.41,0 m³/min. 15 bar 3-12,0 0,8-9,0 216,00
9 | Compressor petrol engine with mounting frame for after cooler
Compressor with petrol engine and after cooler. For blowing-in fibre optic mini cables, fibres and bundle fibres. Suitable for all MicroJets and for MiniJet P 02. The external after cooler reduces the compressed air temperature approx. 8° C above ambient temperature. The compressor is equipped with a sound absorption cover. It is portable by two pneumatic wheels.
  • With Honda-petrol engine 15,50 kW. Dimension: 1080x800x796
  • Flow rate 1000 l/min. at 15,0 bar working pressure.
  • With separate after cooler electrical feeded by the compressor. Air discharge valve: 1 x G 3/4"
  • inclusive folding mounting frame for aftercooler, see next table below.
,,,
CodeTypeAir Press. D-ID C-D kg
9601187 MK 17.41,0 m³/min. 15 bar 3-12,0 0,8-9,0 225,00
10 | Support for after cooler
Support for the after cooler on compressor MK 17.4. Steel frame hot galvanized. With this the after cooler is fixed safe and rubbery-elastic by four elements.
 
To transport the compressor in a van the after cooler is tiltable, please mind the total height of approx. 1,10 m. The after cooler can easily be dismounted from the support.
  • Dimension with vertical positioned after cooler, L/W/H 1170/800/1220
  • Dimension for transportation with tilted after cooler, total height only 1100
,,,
CodeTypeMaterial kg
960147 KHN 17.4LSteel profiles, galvanized 9,00
11 | Compressor electric motor
Compressor with electric motor. For blowing-in fibre optic micro cables, fibres and bundle fibres. Mounted on 2 wheels, which enables the transport on stairs for one person alone. Suitable for UltimaZ P2P.
  • Electric motor 1,5 kW, 230 Volt, compressor dimensions: 570/440/1050 mm.
  • Sound insulation bonnet, sound pressure level 79 dB(A).
  • Constant, infinitely adjustable delivery pressure due to new piston compressor principle.
  • Oil-free operation, no oil change, no check, oil- and water-free air.
,,,
CodeTypeAir Press. D-ID C-D kg
960104 i. Comp 30,12m³/min. 11 bar 2,5-6,0 0,8-4,0 29,00
12 | Y-piece with accessory
Y-piece for connection of 2 compressors VE 100, with same pressure and volume of 15 bar and 0,24m³/min. Incl. 2 non-return valves. Connection parts are not included, the need is as following:
  • For duct-Ø 10 - Code 275.766, DAM 10, Air-connector
  • For duct-Ø 12 - Code 275.768, DAM 12, Air-connector
  • For compressor connection: 2 air hoses Code 0423.340.15, DLS 10/7, see below.
,,,
,,,
,,,
CodeTypeMax. press. D-OD kg
275775 YVE 1615 bar --- 1,10
275766 DAM 1010 bar 10 0,08
275768 DAM 1210 bar 12 0,10
13 | Compressor electric motor
Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for UltimaZ P2P.
  • Electric motor 1,1 kW, 230 Volt. Dimension 560/350/560
  • Flow rate 100 l/min. at 12 bars.
  • Soundproof hood 71 dB(A).
  • Pressure reservoir 4 litre
,,,
CodeTypeAir Press. D-ID C-D kg
960102 VE 100100 l/min. 12 bar 2,5-5,5 0,8-4,0 31,00
14 | Compressed air hose
Compressed air hose DN 10, L 7 m, with swing-coupling and connecting nipple for UltimaZ P2P

,,,
CodeTypeDN Press. Length kg
042334017 DLS 10/710 15 bar 7 m 1,60