1 | Accessory to pilot winches
Polyester ropes for blowing through ducts, spools of 500 or 1000 m. kN = Minimum Breaking Load

,Cable-spooling-winding-unwinding-machines-up-to-55t,Cable-winding-unwinding-spooling-machines-up-to-55t,Boule-d'éponge-conduit-tube,Têtes-sphèrique-d'éponge-conduit-tube,Bouchon-conduit-tube-fendu,Esponjas-esféricas,Esponjas-limpia-conductos-tubos,Tapónes-divididos-conductos-tubos
,,,
,,,
,,,
,,,
,,,
CodeTypeRope Spool kN kg
23297005 KSP 04-404 500 m 2,8 4,70
23297010 KSP 04-404 1000 m 2,8 10,22
23298005 KSP 05-405 500 m 4,5 7,80
23298010 KSP 05-405 1000 m 4,5 14,52
23299005 KSP 06-406 500 m 6,4 18,00
320660 KTA 7Unwinder D 100-1200 --- 8,80
2 | Plastic cord spools
Spools of plastic cord. Minimum order at least 3 spools, price per 1 spool.

,,,
CodeTypeCord-D Spool kN kg
282240 KS 6002 600 m 0,22 0,40
3 | Conduit plugs divided
Conduit plug divided, with coupling, for blowing-in ropes of D 4 mm in ducts.

,,,
,,,
,,,
CodeTypeD-ID kg
234240 KRG 2827-28 1,00
234250 KRG 3534-35 1,05
234260 KRG 4040-41 1,23
4 | Pistons
Pistons with cup rings for blowing ropes in connection with divided plugs KRG 28-40.

,,,
,,,
,,,
CodeTypeD-ID kg
234510 MKO 2827-28 0,13
234530 MKO 3534-35 0,13
234550 MKO 4040-41 0,14
5 | Conduit plugs divided
Conduit plug divided with lateral rope passage. Included 1 slotted sleeve and tools. With these plugs ropes from D 4 can be blown. It is also possible to blow bigger ropes up to D 9 mm directly through the ducts, but only from capstan winches which allows to pay out the ropes stress less.

An air pressure of approx. 0,5-1,5 bar must not be exceeded. The bigger the duct the lower has to be the pressure.
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-ID Press. pipe Coupling kg
234295 KRS 5050-55 1/4" 1/2" 1,50
234297 KRS 5454-61 1/4" 1/2" 1,50
234312 KRS 6161-69 1/4" 1/2" 1,65
234315 KRS 7070-80 3/8" 1/2" 2,60
234325 KRS 7676-85 3/8" 1/2" 2,70
234330 KRS 8686-95 1/2" 1/2" 3,10
234372 KRS 9696-103 3/4" 3/4" 4,90
234385 KRS 103103-112 3/4" 3/4" 4,90
234395 KRS 113113-120 3/4" 3/4" 5,30
234402 KRS 118118-128 3/4" 3/4" 5,30
234405 KRS 128128-136 3/4" 3/4" 6,10
234422 KRS 135135-147 3/4" 3/4" 6,30
234432 KRS 146146-159 3/4" 3/4" 7,00
234445 KRS 160158-172 1" 3/4" 9,50
234462 KRS 173173-184 1" 3/4" 9,80
234485 KRS 198199-208 1" 3/4" 11,10
234489 KRS 220220-225 1" 3/4" 12,30
234490 KRS 240230-240 1" 3/4" 13,00
234491 KRS 250240-250 1" 3/4" 13,50
2344912 Biggerdiam. No --- 0,00
6 | Slotted sleeves
Slotted sleeve, accessory to KRS-plugs for blowing-in different rope diameters.

,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeRope kg
234492 SBU 044 0,15
234493 SBU 055 0,14
234494 SBU 066 0,13
234495 SBU 077 0,12
234496 SBU 088 0,11
234497 SBU 099 0,10
7 | Air-regulator valve
Air-regulator valve for blowing-in of pilot ropes and winch ropes. Equipped with one screw coupling and one standard quick coupling. This regulator valve must not be served in the shaft, but only outside. It is to be connected between two hoses.

,,,
CodeTypeSize kg
234080 REV 341/2-3/4" 0,82
8 | Ball pistons
Ball piston for blowing-in rope winches and simultaneously lubricating the ducts. Ball pistons go easier through the ducts they adapt better to the different duct shapes. Distances can be very long, the air pressures are low approx. 0,5-1,5 bar max.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-ID kg
234542 BKO 4035-42 0,07
234562 BKO 5045-50 0,20
234567 BKO 6050-60 0,24
234572 BKO 7060-70 0,26
234602 BKO 8070-80 0,30
234612 BKO 9080-90 0,35
234632 BKO 11090-110 0,52
234692 BKO 125110-125 0,55
234712 BKO 150130-150 0,72
234722 BKO 160150-160 0,95
234726 BKO 190170-190 1,35
234732 BKO 210190-210 1,60
234734 BKO 225200-225 2,40
234738 BKO 250230-250 3,20
234742 Biggerdiam. not possible 0,00
9 | Duct lubricator
Duct lubricator and cleaner. Other diameters are available. After pulling through these lubricators there is an equal lubrication of the duct wall on the complete length, which reduces the pulling forces up to 80 %.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-ID Length kg
234856 RSG 5045-50 220 0,28
234858 RSG 6050-60 240 0,36
234860 RSG 7060-70 260 0,44
234862 RSG 8070-80 280 0,85
234864 RSG 10080-100 370 0,95
234866 RSG 120100-120 390 1,10
234868 RSG 140120-140 430 1,40
234870 RSG 160140-160 480 1,70
234872 RSG 180160-180 510 2,15
234874 RSG 200180-200 550 2,75
234876 RSG 220200-220 590 3,15
234878 RSG 250220-250 530 3,85
234880 Biggerdiameters No 0,00
10 | Duct lubricator
Duct lubricator and cleaner, two independent balls, especially for passing narrow duct bows. After pulling through these lubricators there is an equal lubrication of the duct wall on the complete length, which reduces the pulling forces up to 80 %.

,,,
,,,
CodeTypeD-ID Length Connection kg
234820 RSB 50/245-50 130 Clipper 0,56
234828 RSB 75/260-70 150 Clipper 0,60
11 | Lubricant liquid for cables and ducts
Lubricant liquid, for medium up to heaviest cables, excellent distribution on the cable and in the duct, up to 80 % friction reducing. Also suitable to reduce strongly the friction pulling-in ducts in ducts.

For lubrication unique and ultimate classification, Water pollution class - non-hazardous, acc. to VCI-Conception. Safety data sheets are available.
,,,
,,,
,,,
CodeTypePack. drums Units kg
235200 SP-128V1 bottle 3,8 l single bottle 4,00
235202 SP-128V4 bottles 3,8 l single bottle 17,00
235220 SP-640V1 pail 19 l single pail 20,00
12 | Funnel for liquid lubricant
Funnel of steel sheet, 3,2 litre, with 2 m hose for introduction of liquid lubricant, type SP 128-SP 190, which can be distributed with the duct lubricator RSG on the whole length of the conduit.

,,,
CodeTypeFor ducts kg
234810 GET 32of any size 0,90