Cable winding plants 0,5-3 t
1 | Cable winding stands
Cable winding and unwinding stands, stationary or for mounting on lorries etc. For drums up to 1,5 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
- Winding and unwinding equipment in many designs.
- Suitable also for multiple drums for cables or hoses.
- Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
- The drum has to be loaded from the top by a hoist.
- The switch board can be replaced on the site at any of the three frame corners.
- Accessory rotating alu-drum shaft, select 0350.692xxx depending on internal width.
2 | Rotating drum shafts
3 | Cable winding stand for 2 drums
Cable winding and unwinding stand for 2 drums, stationary or for mounting on trucks etc. For drums up to 1,0 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
- Winding and unwinding equipment in many designs.
- Suitable for 2 drums and also for multiple drums for cables or hoses.
- Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
- The drums have to be loaded from the top by a hoist.
- accessory rotating alu-drum shaft, select 0350.692xxx depending on internal width.
4 | Cable drum drive to KTA 1.2
Cable drum drive to drum stand KTA 1.2, electric motor 0,75 kW, 400 V/50 Hz, with control box with frequency convertor, for winding and unwinding cables or hoses from KTA stand. Techn. details see table below. Please ask for our more extensive offers.
5 | Hose winding units with rotary transmission lead through
Hose winding units with rotary transmission lead through for air, water and suction tubes. Stationary or for mounting on lorries etc. For drums up to 1,0 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
- Any adaptation according to your application is possible.
- Suitable for single, multiple or several single drums for hoses and cables.
- Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
- The drum has to be loaded from the top by a hoist.
- accessory drum shaft, to be selected acc. to technical needs.
6 | Cable winding stands
Cable winding and unwinding stands, mobile by 2 steering and 2 fixed wheels with parking brake. Wheels are coated with high wattage polyurethane. Suitable for drums up to 1,5 t and speeds up to 6 km/h. See accessories like: electro-, hydraulic- or pneumatic drum drives. Techn. details see table below. Please ask for our more extensive offers.
- Winding and unwinding equipment in many designs.
- Suitable also for multiple drums for cables or hoses.
- Drum drives electric, hydraulic or pneumatic version, see below
- The drum has to be loaded from the top by a hoist.
- accessory rotating alu-drum shaft, select 350.684xxx depending on internal width.
7 | Cable drum drives
Cable drum drives for winding and unwinding cables from KTA stands. Techn. details see table below. Please ask for our more extensive offers.
- TEA 208 - Electro 1,5 kW/400V, with frequency converter 25-100 Hz
- TZ 200 - Hydraulic motor, 12 l/min. 160 bar, without hydraulic power pack
- TP 205 - Pneumatic motor, max. 1 m³/min., 6 bar, incl. air equipment
8 | Hydraulic power packs mobile
Hydraulic power pack for cable drum drive, with petrol- diesel engine, or electric motor, equipped with rapid hose couplings.
- Petrol power pack, oil pressure 160 bar, tank 10 Litre, oil flow 12 l/min.
- With diesel engine oil pressure 160 bar, tank 13 Litre, oil flow 12 l/min.
- With electric motor oil pressure 210 bar, tank 13 Litre, oil flow 14 l/min.
- The hydraulic power pack must not be mounted on drawing bar of the trailer, the hitch load would be to high.
- For controlling the speed please order the following hose set.
9 | Hydraulic hose set
10 | Cable winding units stationary
Cable winding units stationary or for mounting on vehicles etc. For drums up to 3.0 t. This special unit is especially prepared for a drum drive through the centre shaft of the drum. With this drive heavy cables loads can be safety lifted and lowered. Only customer selected steel drums will be fix mounted and cannot be replaced by a standard cable drum. On demand different steel drums can be supplied, which can be replaced in the KTU 3 ZE within 3-4 hours. Please ask for a more extensive offer.
- Mainly used for lowering and lifting of cables and hoses in shafts and ground drillings.
- Through this high lifting and lowering forces can be safely controlled.
11 | Cable drum drive through the centre
Drum drive for winding or unwinding of cables, hoses or other goods. Suitable for cable winding stands KTU 3 ZE. Electric braking motor 4,0 kW, 230/400 volts, frequency convertor, switch cupboard, mobile control panel with 10 m cable. Protection IP 55 hose proofed. This drum drive transmits the winding force through the central drum shaft. With this drive big cable loads can be safety lifted and lowered. Techn. details see below. Please ask for a more extensive offer.
- Electric-brake motor with mitre gear 4,0 kW, 230/400 volt.
- Frequency convertor, control box, mobile remote control with 10 m cable.
- Protection IP 55 hose proof