1 | Rod pushing unit on trailer
This rod pushing unit is used for introducing rods through empty or occupied conduits. The strong hydraulic driven cable feeder is able to force a high push with its long steel chains equipped with neoprene profiles. The special strong rod of 15 mm in selectable in lengths between 300 to 400 m, guarantees a very high pushing stability. The reel for the rod and the length measuring counter are included in the pushing unit, but the rod itself has to be ordered by the wished length. If blockages or damages are suspected in the ducts the use of a red detectable rod with copper conductors is recommendable. This enable the duct line to be followed by a detector and to find the blockades, see table below.
 
The pushing unit can be mounted on a trailer either with canvas cover or with hard box or on any other vehicles. Details see below.
,,,,224000,---
CodeTypeDesignation Configuration kg
224000 ---Pushing unit fix on trailer See details below. 0,00
2 | Rod pushing units
This pushing unit is either for fix mounting on one of the trailer either with canvas cover or with hard box, or is mounted on a base frame. The unit can work independent stationary or be pulled into the trailer to work as a mobile device. The reel and the length measuring counter for the rod are included, the selected length between 300-400 m of the rod has to be ordered separately, see table below.

To work with the unit on base frame without trailer, the 4 outriggers have to be retracted and the whole unit must be secured against a pull or push of at least 250 daN.
 
This version presents the following advantages:
  • The pushing unit can easily be pulled out or into the trailer without mounting work.
  • Afterwards the trailers can be used for any other transports.
  • The pulled out unit can provide the same performance without the trailer.
  • The complete unit can be mounted on different other platforms.
  • Rod feeder optional with petrol engine or electric hydraulic power pack
  • With rod reel including length meter. Without rod to order separately acc. wished length
  • Dimension of the pushing unit on base frame 2500/1290/1700 mm
,,Conduitrode pushingmachine,Copperinlay,Fiberrod,Snakes,Fiberrodpushing,Brinrigide d'aiguillage,Aiguilles,Tirefileperlon,Tirefileacier,BrinrigideLocalisation,224320,RSA15
,,,,224330,RSAG15
,,,,224360,Surcharge
CodeTypeDesignation Push/Pull m/min. kg
224320 RSA 15Pushing unit 250/200 daN 8-50 235,00
224330 RSAG 15Base frame RSA 15 --- --- 54,00
224360 SurchargeFor base plate --- --- 8,70
3 | Trailer for conduit pushing units
Trailer with canvas cover (flat bed trailer). Aluminium platform gate, to rise on the right side and on the rear by pneumatic springs. These protect personnel from weather and humidity.

Trailer with hard body box (flat bed trailer). Box made 17 mm thick Plywood, inside and outside coated by white GFK. To rise on the right side and on the rear by pneumatic springs. These protect personnel from weather and humidity. Mounting the pushing unit as above mentioned.
 
Both trailers are equipped with a straight drawing bar with overrun brake and a ball coupling and two rear outriggers. Each mounted device can be dismounted from the trailer and be used individual for any other work.
  • Trailer, canvas cover L/W/H: 3950/1830/2300, straight drawing bar, overrun brake, coupling height 450
  • Trailer, hard body box L/W/H: 2950/2080/2420, V-shaped drawing bar, overrun brake, coupling height 450
,,,,022430001,1226/13
,,,,022431001,12738/13
,,,,022430101,Surcharge
,,,,034919120,Surcharge
CodeTypeTrailer Tot. weight kg
022430001 1226/13Canvas cover 1200 kg 350,00
022431001 12738/13Hard body box 1300 kg 550,00
022430101 SurchargeFour lashing points on trailers 5,00
034919120 SurchargeAnti-theft device on trailers 1,00
4 | Spare rods Ø 15 mm
Conduit rod yellow, without reel, highest quality of reinforced fibre rod with PP-covering. On ring with alu guide tip. The core of this rod is reinforced by 27 % additional glass fibres. This leads to a higher pushing stability and also to higher breaking resistance.
  • The spare rods are delivered as rings tied off with cable ties.
  • There is a high and dangerous spring tension when opening the ring.
  • For safety reasons we do not supply 15 mm rods as rings.
  • For winding-in 15 mm rods into empty reels a special machine is needed.
  • Therefore the winding-in process can only be done at the Vetter premises.
  • We request you to provide us with the suitable empty reel
  • Please contact our sales department in order to organize a smooth processing.
,,,,224376,ES15-300
,,,,224378,ES15-350
,,,,224380,ES15-400
CodeTypeD/m Alu-tip-D kg
224376 ES 15-30015,0/300 25/M12 90,30
224378 ES 15-35015,0/350 25/M12 105,00
224380 ES 15-40015,0/400 25/M12 120,00
5 | Spare detecting rods Ø 15 mm
Detecting rod red, highest quality of reinforced fibre rod with PP-covering, with copper conductors for detection. Including connector for transmitter. The core of this rod is reinforced by 27 % additional glass fibres. This leads to a higher pushing stability and also to higher breaking resistance.
  • The spare rods are delivered as rings tied off with cable ties.
  • There is a high and dangerous spring tension when opening the ring.
  • For safety reasons we do not supply 15 mm rods as rings.
  • For winding-in 15 mm rods into empty reels a special machine is needed.
  • Therefore the winding-in process can only be done at the Vetter premises.
  • We request you to provide us with the suitable empty reel
  • Please contact our sales department in order to organize a smooth processing.
,,,,225295,OES15,0-300
,,,,225296,OES15,0-350
,,,,225297,OES15,0-400
CodeTypeD/m Alu-tip-D Cond. kg
225295 OES 15,0-30015,0/300 25/M12 6 90,40
225296 OES 15,0-35015,0/350 25/M12 6 105,40
225297 OES 15,0-40015,0/400 25/M12 6 120,40
6 | Cable and duct detector
Cable and duct detector for precise localisation down to a depth of 4,50 m. Complete. set. Frequency 33 kHz, consisting of:
  • Detector with digital and optic-acoustical display.
  • Depth determination including transmitter with earthing cable.
  • Plastic tool bag for complete equipment.
,,,,231615,CAT4+G
CodeTypeFrequency Power Depth kg
231615 CAT4+G33 kHz, 0,12 Watt to 4,0 m 5,20
7 | Guide tips
Guide tip for easy sliding through the pipes. Made of alu or polyamide.

,,,,226380,RAK17
,,,,226400,RAF25
,,,,226410,RKF28
,,,,226420,RKF40
CodeTypeD/Thread For RS Mat. kg
226380 RAK 1717/M 12 9-15 Alu 0,02
226400 RAF 2525/M 12 9-15 Alu 0,05
226410 RKF 2828/M 12 9-15 Poly. 0,08
226420 RKF 4040/M 12 9-15 Poly. 0,14
8 | Shackle
Shackle for guide tip RAF 25, special slim version with slotted screw

,,,,226440,RSL10
CodeTypeBolt-D Opening Mat. kg
226440 RSL 1010 14 Steel 0,09
9 | Guide ball
Guide balls for easy sliding through the pipes. Made of PE.

,,,,226423,RFK70
,,,,226424,RFK75
,,,,226425,RFK85
CodeTypeD/Thread For RS Mat. kg
226423 RFK 7070/M 12 9-15 PE 0,14
226424 RFK 7575/M 12 9-15 PE 0,16
226425 RFK 8585/M 12 9-15 PE 0,18
10 | Guide roller
Guide roller easy pushing through in occupied conduits. Suitable to all rods D 9-11 mm, including guide tips for screwing on the rods.

,,,,226430,RFR50
CodeTypeD/Thread For RS Mat. kg
226430 RFR 5050/M 12 9-15 Alu 0,21
11 | Connectors
Connecting swivel for coupling of two ore more conduit rods.

,,,,226170,RSK18
CodeTypeD/L/Thread For RS Mat. kg
226170 RSK 1818x80/M 12 9-15 Steel 0,11
12 | Guide swivel
Guide swivel for conduit rods, for twist-free pulling of winch ropes or cables. Steel galvanized.

,,,,226390,RSW18
CodeTypeD/L/Thread For RS Mat. kg
226390 RSW 1818x80/M 12 9-15 Steel 0,13