1 | New Product - UltimaZ E25 for in-house installation, professional device
ULTIMAZ E25, blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 300 m. The ULTIMAZ E25 is a consequent further development of the version ULTIMAZ P2P. The comfort features E25 is also designed for in-house installation of mini cables and fibres. The performance is improved and its handling is comfortable.

The battery operated electric drive enables an eight hours operation. The pushing force can be adapted electronically by the operator in six steps from 5 to 22 N. The correct pushing force is found out as usual by crash-tests. This precise adjustment of the pushing force is the basic principle to avoid damages to the delicate mini cables and fibres. The ease of use is increased by the automatic contact pressure of the driving roller system. The contact pressure is automatically determined in dependency of the adjusted pushing force. The maximum speed of 80-180 m/min. is also controlled electronically in dependency of the pushing force.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

Accessory and performance see technical details below. Without cable and duct inserts, see accessory below.
  • Fast and easy starting operation in any spot
  • The battery operated electric drive with electronic controlling
  • The operator does not need large cable blowing experience
  • Small dimension of 80x255x195 mm, weight only approx. 4,3 kg of the basic machine
,Glasfaserkabeleinblasgeräte,Gebäudeinstallation,Kabelabwickelgeräte,Kabelabspulgeräte,Kabelabwickler,Reinigungsschwamm,Reinigungsmolch,Rohrreinigungsschwämme,Kabeleinblasmaschinen,Kabelsabspuler,Kabelabroller,Fiberoptic,Fibreoptic,Cableblowing-inequipment,Cablecoiler,Uncoiler,Winder,Drumwindoff,Ductcleaningsponge,Souflage,Enrouleurbobines,Dérouleurcâbles,Jeuxcalibrage,423210,E25
CodeTypeC-D D-OD Push Press. kg
423210 E250,8-4,0 3-12 0-22 N 10-12 bar 9,40
2 | UltimaZ P2P for in-house installation, start-up device
UltimaZ P2P blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 200 m. The UltimaZ P2P makes it possible to continue the last mile from the underground floor to all flats. Drive through an accu-driven hand-drill, accessory.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

The torque can be adjusted by fine steps from 0-20 N. This avoids largely damages of the cables. Accessory and performance see technical details below. Without cable and duct inserts, see accessory and techn. details below.
  • Fast and easy starting operation in any spot
  • Feeding drive through accu drilling machine of 500 t/min. not included
  • The operator does not need large cable blowing experience
  • Small dimension of 210x75x135, only approx. 2,4 kg of weight for comfortable application
,,,,423200,P2P
CodeTypeC-D D-OD Push Press. kg
423200 P2P0,8-4,0 3-12 0-20 N 10-12 bar 3,90
3 | Compressed air hose
Compressed air hose DN 10, L 5 m, with swing-coupling and connecting standard nipple for UltimaZ P2P to compressor VE 100

,,,,042334015,DLS10/5
CodeTypeDN Press. Length kg
042334015 DLS 10/510 15 bar 5 m 1,30
4 | Air connector for compressor
Air connector for connecting hose DLS 10/5 with a compressor

,,,,275610,DAS42K
CodeTypeD-OD kg
275610 DAS 42K7-14 0,44
5 | Air regulator
Air regulator with manometer for subduct calibration set.

With safety couplings for air pressure hoses.
,,,,275724,DMP16
CodeTypeAdjustable kg
275724 DMP 160-16 bar 1,90
6 | Pressure wheels to P2P
Pressure wheels to P2P, D 40 mm, NBR-tyres or aluminium

,,,,423341,KAPR40N
,,,,423342,KAP40A
CodeTypeC-D Material kg
423341 KAPR 40N1,0-4,0 NBR-tyre plane 0,02
423342 KAP 40A1,0-4,0 Aluminium plane 0,07
7 | Drive wheels to P2P
Drive wheel to Ultimaz P2P, steel D 40, with groove.

,,,,423345,KAP41N
,,,,423341,KAPR40N
CodeTypeC-D Material kg
423345 KAP 41N1,5-2,0 NBR-tyre groove 0,02
423341 KAPR 40N1,0-2,0 NBR-tyre plane 0,02
8 | Drive wheels to P2P
Drive wheel to Ultimaz P2P, steel D 40, with groove.

,,,,423346,KAR42
,,,,423347,KAR402
,,,,423348,KAR43
,,,,423349,KAR404
,,,,423350,KAR44
CodeTypeC-D Material kg
423346 KAR 421,6-2,0 Steel, groove 0,06
423347 KAR 4022,1-2,5 Steel, groove 0,05
423348 KAR 432,6-3,0 Steel, groove 0,06
423349 KAR 4043,1-3,5 Steel, groove 0,05
423350 KAR 443,6-4,0 Steel, groove 0,08
9 | Duct insert divisible for P2P
Duct insert divisible for P2P, for duct-OD 3-12 mm and cable-Ø 1,8-4,0 mm, incl. 6 duct seals.

,,,,423230,RET3018
,,,,423232,RET4025
,,,,423234,RET5033
,,,,423236,RET6040
,,,,423238,RET7040
,,,,423240,RET8040
,,,,423242,RET10040
,,,,423244,RET12040
CodeTypeD-OD C-D For device kg
423230 RET 30183 1,8 Ultimaz P2P 0,01
423232 RET 40254 2,5 Ultimaz P2P 0,01
423234 RET 50335 3,3 Ultimaz P2P 0,01
423236 RET 60406 4 Ultimaz P2P 0,01
423238 RET 70407 4 Ultimaz P2P 0,01
423240 RET 80408 4 Ultimaz P2P 0,01
423242 RET 1004010 4 Ultimaz P2P 0,01
423244 RET 1204012 4 Ultimaz P2P 0,01
10 | Cable insert divisible for Ultimaz P2P
Cable insert divisible for Ultimaz P2P, for cable-Ø 1,0-4,0 mm, for cable lead in.

,,,,423250,KFT180
,,,,423252,KFT250
,,,,423254,KFT400
CodeTypeC-D For device kg
423250 KFT 1800,8-1,8 Ultimaz P2P 0,01
423252 KFT 2501,9-2,6 Ultimaz P2P 0,01
423254 KFT 4002,7-4,0 Ultimaz P2P 0,01
11 | Duct insert not divisible for P2P
Duct insert not divisible for P2P, for duct-Od 3-12 mm and cable-Ø 1,8-4,0 mm, without sealing KAD.

,,,,423260,REN3418
,,,,423262,REN5640
,,,,423264,REN71240
CodeTypeD-OD C-D For device kg
423260 REN 34183-4 1,8 Ultimaz P2P 0,01
423262 REN 56405-6 3,3 Ultimaz P2P 0,01
423264 REN 712407/8/10/12 4 Ultimaz P2P 0,23
12 | Cable insert not divisible for Ultimaz P2P
Cable insert not divisible for Ultimaz P2P, for cable lead in.

,,,,423270,KFN180
,,,,423272,KFN250
,,,,423274,KFN400
CodeTypeC-D For device kg
423270 KFN 1801,0-1,8 Ultimaz P2P 0,18
423272 KFN 2501,9-2,6 Ultimaz P2P 0,18
423274 KFN 4002,7-4,0 Ultimaz P2P 0,18
13 | Cable sealing-set to P2P
Cable sealing-set to Ultimaz P2P, to RET 3018 up to RET 12040, sets of see table below

,,,,42230140,KAD10
,,,,42230141,KAD12
,,,,42230142,KAD18
,,,,42230143,KAD24
,,,,42230144,KAD33
,,,,42230145,KAD40
CodeTypeC-D For device Set of: kg
42230140 KAD 100,8-1,1 Ultimaz P2P 10 0,01
42230141 KAD 121,2-1,4 Ultimaz P2P 10 0,01
42230142 KAD 181,4-1,8 Ultimaz P2P 6 0,01
42230143 KAD 241,8-2,4 Ultimaz P2P 6 0,01
42230144 KAD 332,4-3,3 Ultimaz P2P 6 0,01
42230145 KAD 403,4-4,0 Ultimaz P2P 6 0,01
14 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by Ultimaz P2P, by MicroJets PR/PRM 196. Performance and techn. details see below.
  • The Lubricator guarantees an uniform lubrication on the whole length duct length.
  • With the Lubricator the performance is approximatively 20-40 % higher.
  • Weight machine only 0,6 kg
,,,,423490,L4
CodeTypeC-D D-OD For device kg
423490 L 40,8-4,0 3-12 see above 3,00
15 | Lubricant for FOC
Micro Jetting Lube, lubricant for blowing-in fibre optic cables. Excellent lubricating effect. Adheres to the duct wall and leaves the cable nearly dry, an advantage for over blowing and working in cascades with further blowing machines. Consumption approx. 10 ml per 1000 m at duct-ID 10 mm. For other duct-ID analogue

For lubrication unique and ultimate classification, Water pollution class - non-hazardous, acc. to VCI-Conception. Safety data sheets are available.
,,,,234975,MJL240
CodeTypePack. drums kg
234975 MJL 2401 bottle 0,24 l 0,32
16 | Duct cleaning sponge
Sponge for sub duct cleaning and pre-lubricating prior to cable blowing

,,,,275398,RSM04
,,,,275400,RSM06
,,,,275402,RSM08
,,,,275404,RSM10
CodeTypeD-OD D-ID Cellular Qty. kg
275398 RSM 047 4 D 8x30 20 pcs. 0,01
275400 RSM 067-10 5-6 D 8x50 20 pcs. 0,01
275402 RSM 0810-12 8 D 16x50 20 pcs. 0,02
275404 RSM 1012-16 10-12 D 20x50 20 pcs. 0,03
17 | Compressor electric motor
Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for Ultimaz P2P.
  • Electric motor 1,1 kW, 230 Volt, compressor dimensions: 560/350/560
  • Capacity 100 l/min. at 12 bar.
  • Soundproof hood 71 dB(A).
  • Pressure reservoir 4 litre
,,,,960102,VE100
CodeTypeAir Press. D-ID C-D kg
960102 VE 100100 l/min. 12 bar 2,5-5,5 0,8-4,0 31,00
18 | Compressor electric motor
Compressors with electric motors and integrated after coolers. For blowing-in fibre optic min cables, fibres and bundle fibres up to length of 500 m and more. Mounted on 2 pneumatic wheels, which enables the transport on stairs for one person alone. Suitable for MicroJet EM 25.
  • Electric motor 2,2 kW, 400 Volt, IP 55, compressor dimensions: 1150/580/540
  • Low sound level of 69 dBA(A).
  • 3-fold air filters, clean, dry, oil- and water-free air.
  • With integrated after cooler and water separator. Air discharge valve: 1 x G 3/8"
  • Convenient for one man stair transports.
,,,,960111,VE240
CodeTypeAir Press. D-ID C-D kg
960111 VE 240240 l/min. 10,5 bar 2,5-6,0 0,8-4,0 54,00
19 | Cable unwinder
Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.
  • Collapsible for easy transportation to the site.
  • Easy movable with the drum through big rubber coated wheels.
  • For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
  • As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.
,,,,320290,KTA8
,,,,320292,KTA8W
,,,,315504,ZKP50-80
,,,,3155045,ZKP50-108
CodeTypeEquipment Shaft Cones for kg
320290 KTA 8Winder as above D 25 Hole D 25-80 11,60
320292 KTA 8WSteel tube shaft D 50 See next line 2,05
315504 ZKP 50-80Poly-cone (1 each) D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Poly-cone (1 each) D 50 Hole-D 50-108 0,39