1 | UltimaZ P2P for in-house installation, start-up device
UltimaZ P2P blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 200 m. The UltimaZ P2P makes it possible to continue the last mile from the underground floor to all flats. Drive through an accu-driven hand-drill, accessory.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

The torque can be adjusted by fine steps from 0-20 N. This avoids largely damages of the cables. Accessory and performance see technical details below. Without cable and duct inserts, see accessory and techn. details below.
  • Fast and easy starting operation in any spot
  • Feeding drive through accu drilling machine of 500 t/min. not included
  • The operator does not need large cable blowing experience
  • Small dimension of 210x75x135, only approx. 2,4 kg of weight for comfortable application
,Glasfaserkabeleinblasgeräte,Kabeleinblasgeräte,Einblasgeräte,Kabelblasgeräte,Blasgeräte,CableJet,Superjet,minijet,microjet,ultimaz,blowing-head,Fiber-optic,Cablejet,Superjet,Minijet,Ultimaz,423200,P2P
CodeTypeC-D D-OD Push Press. kg
423200 P2P0,8-4,0 3-12 0-20 N 10-12 bar 3,90
2 | New Product - UltimaZ E25 for in-house installation, professionell device
ULTIMAZ E25, blow fibre units and micro cable blowing device especially for in-house cabling up to lengths of approx. 300 m. The ULTIMAZ E25 is a consequent further development of the version ULTIMAZ P2P. The comfort features E25 is also designed for in-house installation of mini cables and fibres. The performance is improved and its handling is comfortable.

The battery operated electric drive enables an eight hours operation. The pushing force can be adapted electronically by the operator in six steps from 5 to 22 N. The correct pushing force is found out as usual by crash-tests. This precise adjustment of the pushing force is the basic principle to avoid damages to the delicate mini cables and fibres. The ease of use is increased by the automatic contact pressure of the driving roller system. The contact pressure is automatically determined in dependency of the adjusted pushing force. The maximum speed of 80-180 m/min. is also controlled electronically in dependency of the pushing force.

In in-house installation with micro ducts and due to many bows and with special fire protected cables high air pressure of 10-12 bar is necessary. Because of low air volume small manageable compressors (see below) or compressed air bottles are sufficient.

Accessory and performance see technical details below. Without cable and duct inserts, see accessory below.
  • Fast and easy starting operation in any spot
  • The battery operated electric drive with electronic controlling
  • The operator does not need large cable blowing experience
  • Small dimension of 80x255x195 mm, weight only approx. 4,3 kg of the basic machine
,Glasfaserkabeleinblasgeräte,Kabeleinblasgeräte,Einblasgeräte,Kabelblasgeräte,Blasgeräte,Superjet,minijet,microjet,blowing-head,Fiber-optic,,423210,E25
CodeTypeC-D D-OD Push Press. kg
423210 E250,8-4,0 3-12 0-22 N 10-12 bar 9,40
3 | Compressed air hose
Compressed air hose DN 10, L 5 m, with swing-coupling and connecting standard nipple for UltimaZ P2P to compressor VE 100

,,,,042334015,DLS10/5
CodeTypeDN Press. Length kg
042334015 DLS 10/510 15 bar 5 m 1,30
4 | Air connector for compressor
Air connector for connecting hose DLS 10/5 with a compressor

,,Air-connector-distributer,subducts,Vanne pour subducts,Regulateur pneumatic,275610,DAS42K
CodeTypeD-OD kg
275610 DAS 42K7-14 0,44
5 | Air regulator
Air regulator with manometer for subduct calibration set.

With safety couplings for air pressure hoses.
,,,,275724,DMP16
CodeTypeAdjustable kg
275724 DMP 160-16 bar 1,90
6 | Pressure wheels to P2P
Pressure wheels to P2P, D 40 mm, NBR-tyres or aluminium

,,,,423341,KAPR40N
,,,,423342,KAP40A
CodeTypeC-D Material kg
423341 KAPR 40N1,0-4,0 NBR-tyre plane 0,02
423342 KAP 40A1,0-4,0 Aluminium plane 0,07
7 | Drive wheels to P2P
Drive wheel to Ultimaz P2P, steel D 40, with groove.

,,,,423345,KAP41N
,,,,423341,KAPR40N
CodeTypeC-D Material kg
423345 KAP 41N1,5-2,0 NBR-tyre groove 0,02
423341 KAPR 40N1,0-2,0 NBR-tyre plane 0,02
8 | Drive wheels to P2P
Drive wheel to Ultimaz P2P, steel D 40, with groove.

,,,,423346,KAR42
,,,,423347,KAR402
,,,,423348,KAR43
,,,,423349,KAR404
,,,,423350,KAR44
CodeTypeC-D Material kg
423346 KAR 421,6-2,0 Steel, groove 0,06
423347 KAR 4022,1-2,5 Steel, groove 0,05
423348 KAR 432,6-3,0 Steel, groove 0,06
423349 KAR 4043,1-3,5 Steel, groove 0,05
423350 KAR 443,6-4,0 Steel, groove 0,08
9 | Duct insert divisible for P2P
Duct insert divisible for P2P, for duct-OD 3-12 mm and cable-Ø 1,8-4,0 mm, incl. 6 duct seals.

,,,,423230,RET3018
,,,,423232,RET4025
,,,,423234,RET5033
,,,,423236,RET6040
,,,,423238,RET7040
,,,,423240,RET8040
,,,,423242,RET10040
,,,,423244,RET12040
CodeTypeD-OD C-D For device kg
423230 RET 30183 1,8 Ultimaz P2P 0,01
423232 RET 40254 2,5 Ultimaz P2P 0,01
423234 RET 50335 3,3 Ultimaz P2P 0,01
423236 RET 60406 4 Ultimaz P2P 0,01
423238 RET 70407 4 Ultimaz P2P 0,01
423240 RET 80408 4 Ultimaz P2P 0,01
423242 RET 1004010 4 Ultimaz P2P 0,01
423244 RET 1204012 4 Ultimaz P2P 0,01
10 | Cable insert divisible for Ultimaz P2P
Cable insert divisible for Ultimaz P2P, for cable-Ø 1,0-4,0 mm, for cable lead in.

,,,,423250,KFT180
,,,,423252,KFT250
,,,,423254,KFT400
CodeTypeC-D For device kg
423250 KFT 1800,8-1,8 Ultimaz P2P 0,01
423252 KFT 2501,9-2,6 Ultimaz P2P 0,01
423254 KFT 4002,7-4,0 Ultimaz P2P 0,01
11 | Duct insert not divisible for P2P
Duct insert not divisible for P2P, for duct-Od 3-12 mm and cable-Ø 1,8-4,0 mm, without sealing KAD.

,,,,423260,REN3418
,,,,423262,REN5640
,,,,423264,REN71240
CodeTypeD-OD C-D For device kg
423260 REN 34183-4 1,8 Ultimaz P2P 0,01
423262 REN 56405-6 3,3 Ultimaz P2P 0,01
423264 REN 712407/8/10/12 4 Ultimaz P2P 0,23
12 | Cable insert not divisible for Ultimaz P2P
Cable insert not divisible for Ultimaz P2P, for cable lead in.

,,,,423270,KFN180
,,,,423272,KFN250
,,,,423274,KFN400
CodeTypeC-D For device kg
423270 KFN 1801,0-1,8 Ultimaz P2P 0,18
423272 KFN 2501,9-2,6 Ultimaz P2P 0,18
423274 KFN 4002,7-4,0 Ultimaz P2P 0,18
13 | Cable sealing-set to P2P
Cable sealing-set to Ultimaz P2P, to RET 3018 up to RET 12040, sets of 6 each

,Kabeldichtringe,Kabelabdichtringe,Dichtringe,Dichtungen,Lippendichtung,Cable-sealing,gasket,packing,washer,joint,bague,Insufflage,insuffler,42230140,KAD10
,,,,42230141,KAD12
,,,,42230142,KAD18
,,,,42230143,KAD24
,,,,42230144,KAD33
,,,,42230145,KAD40
CodeTypeC-D For device Set of: kg
42230140 KAD 100,8-1,1 Ultimaz P2P 6 0,01
42230141 KAD 121,2-1,4 Ultimaz P2P 6 0,01
42230142 KAD 181,4-1,8 Ultimaz P2P 6 0,01
42230143 KAD 241,8-2,4 Ultimaz P2P 6 0,01
42230144 KAD 332,4-3,3 Ultimaz P2P 6 0,01
42230145 KAD 403,4-4,0 Ultimaz P2P 6 0,01
14 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by Ultimaz P2P, by MicroJets PR/PRM 196. Performance and techn. details see below.
  • The Lubricator guarantees an uniform lubrication on the whole length duct length.
  • With the Lubricator the performance is approximatively 20-40 % higher.
  • Weight machine only 0,6 kg
,Lubricator,Kabelschmiergerät,Schmiergeräte,Ultimaz,Lubricator,greasing,Lubricator,423490,L4
CodeTypeC-D D-OD For device kg
423490 L 40,8-4,0 3-12 see above 3,00
15 | Lubricant for FOC
Micro Jetting Lube, lubricant for blowing-in fibre optic cables. Excellent lubricating effect. Adheres to the duct wall and leaves the cable nearly dry, an advantage for over blowing and working in cascades with further blowing machines. Consumption approx. 10 ml per 1000 m at duct-ID 10 mm. For other duct-ID analogue

For lubrication unique and ultimate classification, Water pollution class - non-hazardous, acc. to VCI-Conception. Safety data sheets are available.
,,,,234975,MJL240
CodeTypePack. drums kg
234975 MJL 2401 bottle 0,24 l 0,32
16 | Duct cleaning sponge
Sponge for sub duct cleaning and pre-lubricating prior to cable blowing

,,,,275398,RSM04
,,,,275400,RSM06
,,,,275402,RSM08
,,,,275404,RSM10
CodeTypeD-OD D-ID Cellular Qty. kg
275398 RSM 047 4 D 8x30 20 pcs. 0,01
275400 RSM 067-10 5-6 D 8x50 20 pcs. 0,01
275402 RSM 0810-12 8 D 16x50 20 pcs. 0,02
275404 RSM 1012-16 10-12 D 20x50 20 pcs. 0,02
17 | Sub duct slitter
Sub duct slitter for lengthwise slitting. Supplied with a protecting cap.

,,,,255942,MLS20
CodeTypeSubduct occup. Subduct empty Wall L/W/H mm kg
255942 MLS 20from D 10x1,00 from 8x2,00 to 2,00 125x50x30 0,07
18 | Sub duct slitter
Sub duct slitter for lengthwise slitting and circumferential slitting of plastic conduits and cable covers. Cutter for empty and occupied subducts and dismantler for multiducts. Special thin and grinded turning guide shoe blade. Special shape of handle reduces danger of injury. Incl. 2 spare turning blades, e.g. 4 single blades.

,,,,255950,MLS22
,,,,255955,MLE22
CodeTypeSubduct occup. Subduct empty Wall L/W/H mm kg
255950 MLS 22from D 7x1,50 from 5x0,75 to 2,00 150x100x27 0,70
255955 MLE 22Spare knife for LMS 22 0,02
19 | Sub duct slitter
Sub duct slitter for lengthwise slitting of plastic conduits and cable covers. Cutter for empty and occupied subducts and dismantler for multiducts. Special thin and guide shoe blade suitable for smallest subducts, see table below. Through automatic retracting of the blade damages of the cable and danger of injuries are reduced.
  • MLS 25 with special thin and guide shoe blade grinded for smallest subducts from D 4x0,5.
  • MLS 26 with standard thin and guide shoe blade for small subducts from D 7x1,5.
,,,,255952,MLS25
,,,,255953,MLS26
,,,,255956,MLE25
,,,,255957,MLE26
CodeTypeDuct occup. Duct empty Wall L/W/H mm kg
255952 MLS 25from D 4x0,50 from D 4x0,50 to 1,50 160x60x22 0,09
255953 MLS 26from D 7x1,50 from D 7x1,50 to 1,50 160x60x22 0,10
255956 MLE 25Spare knife for LMS 25 to 1,50 --- 0,02
255957 MLE 26Spare knife for LMS 26 to 1,50 --- 0,02
20 | FOC-Cable cutter
Cable side cutter for micro and mini FOC cables up to dia. 4,0 mm, length 125 mm. Knife special hardened also for Aramid and Kevlar.

,,,,255960,KSS4,0
CodeTypeFor FOC-D kg
255960 KSS 4,00,5-4,0 0,06
21 | Cable cutter
Cable cutter for Cu-/Al and FOC cables up to D 20 mm / 70 mm². Precision ground, hardened blades, therefore clean and smooth cut. Insulated with multi-component grips, VDE-tested. Length 200 mm.

,,,,255965,KSD20
CodeTypeFor C-D kg
255965 KSD 2020 0,36
22 | Duct cutter
Duct cutter for occupied or empty subducts.

,,,,272400,SDC0314
CodeTypeD-OD For ducts kg
272400 SDC 03143-14 occupied + empty 0,02
23 | Duct cutting tongs
Duct cutting tongs, only for use with empty subducts.

,,,,272410,RSK0214
,,,,0931240272,EM14
,,,,272414,RSK0525
,,,,0931240302,EM25
CodeTypeD-OD For ducts kg
272410 RSK 02142-14 only for empty ducts 0,10
0931240272 EM 14-- 5 spare blades for RSK 0214 0,03
272414 RSK 05255-25 only for empty ducts 0,28
0931240302 EM 25-- 5 spare blades for RSK 0525 0,02
24 | Burring tool
Burring tool for in- and outside of plastic conduits. Of lightweight aluminium

,,,,273175,MRE26
CodeTypeD-OD Dimension kg
273175 MRE 263-26 D 36x90 0,39
25 | Case for accessory
Case for micro cabling accessory, with 9 shelves as following:
  • 4 each 132x82x105
  • 4 each 168x131x105
  • 1 of 286x168x105
,,,,275638,KZM6040
CodeTypeDimension kg
275638 KZM 6040600x400x155 4,30
26 | Cable crash test tube
Cable crash test tube transparent with sealing end. For limiting the pushing force of the blowing-in machines. Tests without compressed air. For determination of the cable stiffness up to the crash. Safe packed in reusable plastic duct.

Essential for fail-safe adjustment of the pushing force of all different cable blowing machines. Duct-length 1 m.
,,,,275296,CTR05/03
,,,,275300,CTR10/04
,,,,275303,CTR12/08
CodeTypeD-OD D-ID For C-D kg
275296 CTR 05/035 3 to 2,0 0,40
275300 CTR 10/0410 4 to 3,0 0,50
275303 CTR 12/0812 8 to 6,5 0,55
27 | Cable blow-in stop
Cable blow-in stop for in-house and underground fibre cable installations for cable lengths up to 200 m. Transparent duct with sponge shock absorber.

The standard rope winch is equipped with hand operated rope guide and a rope protection cover according to the rules. The winch can be equipped with the mechanical rope length measuring device SLM 510. For pulling-in fibre optic cables, subducts or delicate cables with the electronic digital line pull data recorder with USB interface, see below. For safety reason the pulling force on the bottom of drum is limited to 5,0 kN.
,,,,275650,KES0704
CodeTypeFor duct OD D-OD D-ID kg
275650 KES 07047 7 4 0,03
28 | Cable guiding heads
Cable guiding heads for screwing on the cable heads for friction-low sliding during cable-blowing.

,,,,275517,KFM23
,,,,275520,KFM28
,,,,275523,KFM44
CodeTypeD/L C-D Set of kg
275517 KFM 232,3/8 2 10 0,01
275520 KFM 282,8/14 2,5 10 0,01
275523 KFM 444,4/17 4 10 0,11
29 | Compressor electric motor
Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for Ultimaz P2P.
  • Electric motor 1,1 kW, 230 Volt, compressor dimensions: 560/350/560
  • Capacity 100 l/min. at 12 bars.
  • Soundproof hood 71 dB(A).
  • Pressure reservoir 4 litre
,,Compressors,Compresseur,960102,VE100
CodeTypeAir Press. D-ID C-D kg
960102 VE 100100 l/min. 12 bar 2,5-5,5 0,8-4,0 31,00
30 | Compressor electric motor
Compressors with electric motors and integrated after coolers. For blowing-in fibre optic min cables, fibres and bundle fibres up to length of 500 m and more. Mounted on 2 pneumatic wheels, which enables the transport on stairs for one person alone. Suitable for MicroJet EM 25.
  • Electric motor 2,2 kW, 400 Volt, IP 55, compressor dimensions: 1150/580/540
  • Low sound level of 69 dBA(A).
  • 3-fold air filters, clean, dry, oil- and water-free air.
  • With integrated after cooler.
  • Convenient for one man stair transports.
,,,,960111,VE240
CodeTypeAir Press. D-ID C-D kg
960111 VE 240240 l/min. 10,5 bar 2,5-6,0 0,8-4,0 54,00
31 | Cable unwinder
Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.
  • Collapsible for easy transportation to the site.
  • Easy movable with the drum through big rubber coated wheels.
  • For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
  • As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.
,,,,320290,KTA8
,,,,320292,KTA8W
,,,,315504,ZKP50-80
,,,,3155045,ZKP50-108
CodeTypeEquipment Shaft Cones for kg
320290 KTA 8Winder as above D 25 Hole D 25-80 11,60
320292 KTA 8WSteel tube shaft D 50 See next line 2,05
315504 ZKP 50-80Polyam. cones D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Polyam. cones D 50 Hole-D 50-108 0,39