1 | SuperJet for FOC D 12-34 mm
SuperJet for tension-free blowing-in of bigger fibre optic cables and bundles of sub ducts D 7-14 mm each. A very long belt drive of 330 mm secures a correct guide of cables and sub ducts. With digital length and speed meter. Including hydraulic power pack with petrol engine and control instruments. Worldwide thousand fold proven blowing machine. For successful blowing-in of big length, in ducts of D 50 mm a compressor of 12 bar and 10 m³/min. is necessary. Basic machine without belts, cable and duct inserts. See accessory below. Basic equipment consist of the following details:
  • Petrol-hydraulic pack with hoses
  • Length- and speed meter
  • Ball valve 1 1/2" with screw couplings.
  • Air pressure hose 1 1/2", length 10 m.
  • Compressor of min. 10 m³/12 bar for duct dia. 50x4,6
,Glasfaserkabeleinblasgeräte,Subducteinblasgeräte,Bündelböcke,Kabeleinsätze,Trommelabspulgestell,Kabeleinblasmaschinen,Fiberoptic,Fibreoptic,Drivingchains,Creeperchains,Drumstand,Winding,Spooling,Cableblowing-inequipment,Souflage,Enrouleurbobines,Dérouleurcâbles,Jeuxcalibrage,410314,SJH34
CodeTypeCable-D Subducts Chain band Duct-D kg
410314 SJH 3414-32 D 7-14 330 28-63 125,00
2 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by CableJet und SuperJet. Performance and techn. This lubricator L 18 is especially recommended when blowing bigger cables in ducts <50 mm. Performance and techn. details see below. Article with accessory klick here!
  • The Lubricator L 18guarantees an uniform lubrication on the whole length duct length.
  • This bigger Lubricator L 18 is only for use with CableJet and SuperJet machines.
,,,,423505,L18
CodeTypeSuitable to K-D Ro-AD kg
423505 L 18CableJet+SuperJet 9-18 20-50 10,00
3 | Accessory for FOC-floating
Accessory for FOC-floating with water for CableJet and SuperJet.
  • The CableJet and SuperJet are also able to float-in very long lengths of cables with water.
  • Cable lengths of 10 km were floated very successfully.
  • The procedure is very simple and big length will certainly be achieved.
  • Please ask for our special systems documents.
,,,,275210,REC15/1W
,,,,275213,RES15/1W
,,,,275216,GMT600
CodeTypeSuitable to C-D D-OD Press. kg
275210 REC 15/1WCablejet 9-19 28-63 4-8 bar 4,80
275213 RES 15/1WSuperJet 14-32 28-63 4-8 bar 3,45
275216 GMT 600SuperJet Lubricant funnel for all for all 1,00
4 | Y-duct connector
Y-duct connector for blowing-in a second or third cable in occupied ducts. Please select for this the corresponding cable and duct inserts. See table below of CableJet or SuperJet.
  • Allows to blow-in second or third cable in the same duct.
  • Also necessary for blowing of additional subducts in occupied ducts.
,,,,410220,YK5050
,,,,41024510,KEY18
CodeTypeDuct inserts Cable inserts kg
410220 YK 50502 x for D-OD 50 incl. for 2 cables order separately 16,00
41024510 KEY 18 for 3rd cable order separately 0,46
5 | Creeper chain for cables
Creeper chain with rubber cams for blowing-in cables of D 14-32 mm with the SuperJet. Two are required.

,,,,042500209,PRO0820
,,,,0425002095,PRS0821
CodeTypeSuitable for C-D Required kg
042500209 PRO 0820SuperJet 14-32 2 1,60
0425002095 PRS 0821SuperJet Chain joint 2 0,02
6 | Driving chains for sub ducts
Driving chains for blowing-in subducts with the SuperJet, combination see table below.

,,,,42107007,KET7/007
,,,,42107010,KET7/010
,,,,42111005,KET10/345
,,,,42111007,KET10/007
,,,,42111205,KET12/345
,,,,42111207,KET12/007
,,,,42111403,KET14/023
,,,,42111404,KET14/004
,,,,42111633,KET16/003
CodeTypeD-OD Subducts In D-OD kg
42107007 KET 7/0077 7 50 or 40 4,70
42107010 KET 7/0107 10 50 or 40 4,70
42111005 KET 10/34510 3/4/5 50 or 40 4,85
42111007 KET 10/00710 7 50 4,70
42111205 KET 12/34512 3/4/5 50 or 40 10,20
42111207 KET 12/00712 7 63 4,70
42111403 KET 14/02314 2/3 50 5,20
42111404 KET 14/00414 4 50 11,00
42111633 KET 16/00316 3 50 11,00
7 | Flat rubber chain
Flat rubber chain single incl. chain joint. This chain is mounted on the bottom to complete the existing chain of 5x7 / 5x10 and 5x12 for further subducts of 2x7 / 3x7 / 2x10 and 2x12 mm.

,,,,042113931,flatchain
CodeTypeD-OD Subducts In D-OD kg
042113931 flat chainsee text see text 50 or 40 1,00
8 | Cable inserts
Cable inserts suitable to CableJet and SuperJet. Also necessary for the Y-piece to blow-in a second or third cable in one duct. One set of cable sealing for the hole range of cable diameters is included.

,,,,41015014,KEJ14
,,,,41015015,KEJ15
,,,,41015018,KEJ18
,,,,41015022,KEJ22
,,,,41015024,KEJ24
,,,,41015028,KEJ28
,,,,41015032,KEJ32
CodeTypeC-D kg
41015014 KEJ 1412,5-14,0 0,44
41015015 KEJ 1514,0-15,5 0,44
41015018 KEJ 1815,5-18,0 0,45
41015022 KEJ 2217,5-22,0 0,41
41015024 KEJ 2422,0-24,0 0,45
41015028 KEJ 2824,0-28,0 0,41
41015032 KEJ 3228,0-32,0 0,41
9 | Cable sealing
Cable sealing for CableJet. These are also useable in the Y-piece for blowing-in of further cables in the same duct.

,,,,415140,KDR14
,,,,415150,KDR15
,,,,415180,KDR18/16
,,,,41518018,KDR18/18
,,,,415200,KDR20/18
,,,,41520020,KDR20/20
,,,,41522022,KDR20/22
,,,,415230,KDR24
,,,,415280,KDR25
,,,,41528028,KDR28
,,,,41535030,KDR32/30
,,,,41535033,KDR32/32
CodeTypeC-D For insert Set of kg
415140 KDR 1412,5-14,0 KEJ 14 20 half seals 0,01
415150 KDR 1514,0-15,5 KEJ 15 20 half seals 0,02
415180 KDR 18/1615,0-16,0 KEJ 18 20 half seals 0,02
41518018 KDR 18/1816,0-18,0 KEJ 18 20 half seals 0,02
415200 KDR 20/1817,0-18,0 KEJ 18 20 half seals 0,04
41520020 KDR 20/2018,0-20,0 KEJ 22 20 half seals 0,04
41522022 KDR 20/2220,0-22,0 KEJ 22 20 half seals 0,04
415230 KDR 2422,0-24,0 KEJ 22 20 half seals 0,03
415280 KDR 2523,0-25,0 KEJ 22 20 half seals 0,05
41528028 KDR 2825,0-28,0 KEJ 28 20 half seals 0,05
41535030 KDR 32/3028,0-30,0 KEJ 32 20 half seals 0,12
41535033 KDR 32/3230,0-32,0 KEJ 32 20 half seals 0,12
10 | Subduct chain inserts
Subduct chain inserts suitable to SuperJet to blow-in a bundle of subducts. Sealing set is included. Suitable to chains see table below.

,,,,41015035,SDJ36
,,,,41015042,SDJ42
CodeTypeFor subduct chains KET kg
41015035 SDJ 367/007 (7/010) (10/345) (10/007) 0,36
41015042 SDJ 4212/345 (12/0079) (14/023) (14/004) (16/003) 0,36
11 | Subduct sealing
Subduct-sealing to subduct-inserts for SuperJet.

,,,,41535038,SDR36
,,,,41542044,SDR42
CodeTypeFor insert Set of kg
41535038 SDR 36SDJ 36 4 half seals 0,01
41542044 SDR 42SDJ 37 2 cpl. seal 0,06
12 | Duct inserts
Duct inserts suitable to CableJet, SuperJet. Also necessary for the Y-piece to blow-in a second or third cable in one duct.

,,,,41018032,REJ32
,,,,41018040,REJ40
,,,,41018050,REJ50
,,,,41018063,REJ63
CodeTypeD-OD kg
41018032 REJ 3232 1,40
41018040 REJ 4040 1,40
41018050 REJ 5050 1,40
41018063 REJ 6363 1,40
13 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for CableJet and SuperJet and for duct ID up to 41 mm. Mounted on single axle trailer with height adjustable overrun drawbar. Incl. Diesel-Oxidation filter and particle filter. Emission standard IV and US-standard EPA Tier 4.
  • Deutz Diesel-engine, 105 kW. Compressor dimension: 5180x2130x1790
  • Flow rate 10,70 m³, at 12 bar working pressure
  • With integrated after cooler and water separator.
  • Diesel-Oxidation filter and particle filter. Emission standard IV and US-standard EPA Tier 4.
  • Air discharge valves: 1 x G 1 1/2" and 3 x G 3/4"
,,,,960125,M125
CodeTypeAir Press. D-ID C-D kg
960125 M 1259,7-11,5 m³/min. 14-7 bar, s. above to 41 to 30 2.088,00
14 | Pressure release valve
Pressure release valve with sound absorber for compressors. Max. pressure 15 bar.

,,,,096010038,EVK34
,,,,275220,EVK15
CodeTypePress. For compressor kg
096010038 EVK 3415 bar MK 17 / M 31 1,30
275220 EVK 1515 bar M 125 2,70
15 | Compressed air hose
Air hose, special flat, for blowing-in fibre optic cables and subducts. Complete with screw fittings.

,,,,410420,KFS15/1,5"
,,,,231660,KFS15/1"
,,,,23165910,KFS10/1"
CodeTypeSize Working Bursting Length kg
410420 KFS 15/1,5"1 1/2" 20 bar 60 bar 15 m 9,12
231660 KFS 15/1"1" 15 bar 45 bar 15 m 4,70
23165910 KFS 10/1"1" 15 bar 45 bar 10 m 3,50
16 | Drum unwinding stand
Drum transporting and unwinding stand for subduct drums of different suppliers. For several application e.g. on platforms of trucks or for placing on the ground or on the trailer TRA 8120, see below. Equipped with 2 lightweight aluminium shafts D 75 mm with 2 clamps and 6 spacer tubes.
 
Drum unwinding stand dismounted for shipment ex works. With small efforts the customer can screw it together. If not used for longer time, it can again be dismounted and stocked at a very small place.
  • Sturdy steel construction, hot galvanized, screw mounted, easy dismountable for transport.
  • Pay load for 8 / 6 full subduct drums, total weight without trailer 2500 kg possible.
  • Two crank spindles to lift the stand for unwind the subducts in any position.
,,,,344100,TRG8120
,,,,344110,TRG8120S
CodeTypeDrums/D Drum width Int. width L/W/H mm kg
344100 TRG 81208 max. 1200 max. 440 2160 2770/2330/770 277,00
344110 TRG 8120S6 max. 1200 max. 440 1720 2770/1900/770 250,00
17 | Platform Trailer
Tandem trailer prepared for mounting the drum unwinding stand TRG 8120 or for universal use for other goods. Height adjustable draw bar with overrun and parking brake. With eye and interchangeable ball coupling. Two rear crank spindles. Chamber to lodge the aluminium loading ramps. accessory 4 folding down alu-boards and 2 aluminium loading ramps. Trailer checked by Technical Inspection Agency.

,,,,344300,TRA8120
CodeTypeTotal Payl. Hitch L/W/H mm kg
344300 TRA 81202000 kg 1245 kg 100 kg 5430/2450/600 800,00
18 | Aluminium boards to trailer
Folding down aluminium boards to tandem trailer, four parts, height 300 mm.

,,,,344301,TRAboard
CodeTypeHeight kg
344301 TRA board300 50,00
19 | Drum loading ramps
Drum loading ramps, light aluminium construction for easy loading subduct drums on the trailer by only one person.

,,,,344302,TRARamp
CodeTypeSuitable to Dimension kg
344302 TRA RampTRA 8120 2500x300x55 20,00
20 | Cable bundle stand
Bundle stand, triangle changeable up or downgrade, on tripod with height adjustment, steel construction galvanized.

,,,,203910,BNB3
CodeTypeRoller-D Mat. SWL L/W/H mm kg
203910 BNB 342x320 Steel 200 kg 900x900x1300 13,20