1 | CableJet for FOC D 9-19 mm
CableJet for tension-free blowing-in of fibre optic cables D 9-19 mm. Worldwide thousand fold proven blowing machine. Basic machine without cable and duct inserts. See accessory below.
  • Average lengths are 2000 m and more.
  • Pneumatic cable drive, easy to control.
  • Electronic digital length- and speed measuring device
  • For ducts to D 50, compressors of a pressure of 12 bar at 10 m³/min. is necessary.
  • For ducts to D 63, compressors of a pressure of 12 bar at 14 m³/min. is necessary.
,CableJet,KabelJet,Jet,Kabeltschet,einschwemmen,Wasser,Einblasmaschine,CableJet,blowing-head,Fiber-optic,Cablejet,Superjet,Insufflage,insuffler,410100,CJS19
CodeTypeC-D For D-OD Air kg
410100 CJS 199-19 28-63 10 m³/12 bar 47,00
2 | Driving shafts for cable D 6-9 mm
Driving shafts for smaller cables D 6-9 mm, suitable to CableJet.

,,,,41015005,AWS6-9
CodeTypeC-D kg
41015005 AWS 6-96-9 1,40
3 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by CableJet und SuperJet. Performance and techn. This lubricator L 18 is especially recommended when blowing bigger cables in ducts <50 mm. Performance and techn. details see below.
  • The Lubricator guarantees an uniform lubrication on the whole length duct length.
  • This bigger Lubricator L 18 is only for use with CableJet and SuperJet machines.
,,,,423505,L18
CodeTypeSuitable to K-D Ro-AD kg
423505 L 18CableJet+SuperJet 9-18 20-50 10,00
4 | Accessory for FOC-floating
Accessory for FOC-floating with water for CableJet and SuperJet.
  • The CableJet and SuperJet are also able to float-in very long lengths of cables with water.
  • Cable lengths of 10 km were floated very successfully.
  • The procedure is very simple and big length will certainly be achieved.
  • Please ask for our special systems documents.
,,,,275210,REC15/1W
,,,,275213,RES15/1W
,,,,275216,GMT600
CodeTypeSuitable to C-D D-OD Press. kg
275210 REC 15/1WCablejet 9-19 28-63 4-8 bar 4,80
275213 RES 15/1WSuperJet 14-32 28-63 4-8 bar 3,45
275216 GMT 600SuperJet Lubricant funnel for all for all 1,00
5 | Y-duct connector
Y-duct connector for blowing-in a second or third cable in occupied ducts. Please select for this the corresponding cable and duct inserts. See table below of CableJet or SuperJet.
  • Allows to blow-in second or third cable in the same duct.
  • Also necessary for blowing of additional subducts in occupied ducts.
,Y-Stück,zweites Kabel,drittes Kabel,Abzweig,Y-piece,Y-appareil,410220,YK5050
,,,,41024510,KEY18
CodeTypeDuct inserts Cable inserts kg
410220 YK 50502 x for D-OD 50 incl. for 2 cables order separately 16,00
41024510 KEY 18 for 3rd cable order separately 0,46
6 | SuperJet for FOC D 12-34 mm
SuperJet for tension-free blowing-in of bigger fibre optic cables and bundles of sub ducts D 7-14 mm each. A very long belt drive of 330 mm secures a correct guide of cables and sub ducts. With digital length and speed meter. Including hydraulic power pack with petrol engine and control instruments. Worldwide thousand fold proven blowing machine. For successful blowing-in of big length, in ducts of D 50 mm a compressor of 12 bar and 10 m³/min. is necessary. Basic machine without belts, cable and duct inserts. See accessory below. Basic equipment consist of the following details:
  • Petrol-hydraulic pack with hoses
  • Length- and speed meter
  • Ball valve 1 1/2" with screw couplings.
  • Air pressure hose 1 1/2", length 10 m.
  • Compressor of min. 10 m³/12 bar for duct dia. 50x4,6
,,,,410314,SJH34
CodeTypeC-D Subducts Chain band Duct-D kg
410314 SJH 3414-32 D 7-14 L 330 28-63 125,00
7 | Cable inserts
Cable inserts suitable to CableJet and SuperJet. Also necessary for the Y-piece to blow-in a second or third cable in one duct. One set of cable sealing for the hole range of cable diameters is included.

,Kabeleinsätze,Einsätze,Cable-inserts,cablejet,superjet,,41015009,KEJ9
,,,,41015011,KEJ11
,,,,41015012,KEJ12
,,,,41015014,KEJ14
,,,,41015015,KEJ15
,,,,41015018,KEJ18
,,,,41015022,KEJ22
,,,,41015024,KEJ24
,,,,41015028,KEJ28
,,,,41015032,KEJ32
CodeTypeC-D kg
41015009 KEJ 96,0- 9,0 0,46
41015011 KEJ 119,0-11,0 0,43
41015012 KEJ 1211,0-12,3 0,44
41015014 KEJ 1412,3-14,0 0,44
41015015 KEJ 1514,0-15,5 0,44
41015018 KEJ 1815,5-18,0 0,45
41015022 KEJ 2217,5-22,0 0,41
41015024 KEJ 2422,0-23,5 0,45
41015028 KEJ 2823,5-28,0 0,41
41015032 KEJ 3228,0-32,0 0,41
8 | Cable sealing
Cable sealing for CableJet and SuperJet. These are also useable in the Y-piece for blowing-in of further cables in the same duct.

,Kabeldichtringe,Kabelabdichtringe,Dichtungen,Lippendichtung,Cable-sealing,gasket,packing,washer,joint,bague,minijet,ultimaz,415107,KDR07
,,,,415108,KDR08
,,,,415109,KDR09
,,,,415110,KDR10
,,,,415111,KDR11
,,,,415120,KDR12
,,,,415140,KDR14
,,,,415150,KDR15
,,,,415180,KDR18/16
,,,,41518017,KDR18/17
,,,,41518018,KDR18/18
,,,,415200,KDR20/18
,,,,41520020,KDR20/20
,,,,41522022,KDR22/22
,,,,415230,KDR24
,,,,415280,KDR25
,,,,41528026,KDR28/26
,,,,41528028,KDR28
,,,,41535030,KDR32/30
,,,,41535033,KDR32/32
CodeTypeC-D To insert Set of kg
415107 KDR 076,0-6,7 KEJ 9 20 half seals 0,01
415108 KDR 086,7-8,5 KEJ 9 10 cpl. seals 0,01
415109 KDR 098,5-9,0 KEJ 9 20 half seals 0,01
415110 KDR 109,0-10,3 KEJ 11 20 half seals 0,01
415111 KDR 1110,3-11,0 KEJ 11 20 half seals 0,01
415120 KDR 1211,0-12,3 KEJ 12 20 half seals 0,01
415140 KDR 1412,3-14,0 KEJ 14 20 half seals 0,01
415150 KDR 1514,0-15,5 KEJ 15 20 half seals 0,02
415180 KDR 18/1615,5-16,8 KEJ 18 20 half seals 0,02
41518017 KDR 18/1716,8-17,5 KEJ 18 20 half seals 0,02
41518018 KDR 18/1817,5-18,0 KEJ 18 20 half seals 0,02
415200 KDR 20/1817,5-18,3 KEJ 22 20 half seals 0,04
41520020 KDR 20/2018,3-20,4 KEJ 22 20 half seals 0,04
41522022 KDR 22/2220,4-22,0 KEJ 22 20 half seals 0,04
415230 KDR 2422,0-23,5 KEJ 24 20 half seals 0,03
415280 KDR 2523,5-25,0 KEJ 28 20 half seals 0,05
41528026 KDR 28/2625,0-26,4 KEJ 28 20 half seals 0,12
41528028 KDR 2826,4-28,0 KEJ 28 20 half seals 0,05
41535030 KDR 32/3028,0-30,0 KEJ 32 20 half seals 0,12
41535033 KDR 32/3230,0-32,0 KEJ 32 20 half seals 0,12
9 | Duct inserts
Duct inserts suitable to CableJet, SuperJet. Also necessary for the Y-piece to blow-in a second or third cable in one duct.

,Rohrsägen,Kabelschutzrohrsägen,Sägen,Kreissägen,,,41018032,REJ32
,,,,41018040,REJ40
,,,,41018050,REJ50
,,,,41018063,REJ63
CodeTypeD-OD kg
41018032 REJ 3232 1,40
41018040 REJ 4040 1,40
41018050 REJ 5050 1,40
41018063 REJ 6363 1,40
10 | Cable guiding heads
Cable guiding heads for screwing on the cables for low-friction sliding during cable-blowing. One set of 6 different cable diameters from 8,5 to 20 mm.

,Kabelführungskopf,Kabelführungsköpfe,Cable guides,heads,tips,Tête de guidage,410270,KFM82
CodeTypeFor C-D Head OD Set of kg
410270 KFM 828,5-20 15-22 6 0,11
11 | Sonic heads
Sonic heads for successful blowing-in of thin and soft fibre optic cables with the CableJet or the SuperJet for achieving of bigger lengths.
  • The sonic head opens and allows to pass 90 % of the cable supporting Jet-stream.
  • The pulling force exerting on the cable head is therefore only of some kg.
  • This pull as pre-tension is enough to carry soft cable straight on through the duct.
,,,,410600,SKO40
,,,,410620,SKO50
,,,,410640,SKO63
CodeTypeD-OD D-ID kg
410600 SKO 4032+41 26-32 0,48
410620 SKO 5040+50 32-41 0,59
410640 SKO 6363 40-51 0,88
12 | Duct cleaning sponge
Sponge for duct cleaning and pre-lubricating prior to cable blowing

,Rohreinsätze,Rohrdichtringe,,Duct-cleaning-sponge,Eponge nettoyage,275408,RSM32
,,,,275410,RSM40
,,,,275412,RSM50
,,,,275414,RSM63
CodeTypeD-OD D-ID Cellular kg
275408 RSM 3232 28 D 45x90 0,01
275410 RSM 4040 35 D 55x90 0,01
275412 RSM 5050 40 D 65x90 0,01
275414 RSM 6363 51 D 78x90 0,02
13 | Cable crash test tube
Cable crash test tube transparent with sealing end. For limiting the pushing force of the blowing-in machines. Tests without compressed air. For determination of the cable stiffness up to the crash. Safe packed in reusable plastic duct.

,Kabel-Crash-Crasch,Test-Rohre,Kräsch,Cable crash test-tube,,275312,CTR32/27
,,,,275315,CTR40/34
,,,,275318,CTR50/42
,,,,275321,CTR63/54
CodeTypeD-OD D-ID For C-D Length kg
275312 CTR 32/2732 28 to 15,0 1,65 m 0,80
275315 CTR 40/3440 34 to 16,0 1,65 m 1,10
275318 CTR 50/4250 42 to 20,0 1,65 m 1,30
275321 CTR 63/5463 54 to 25,0 1,65 m 1,70
14 | Duct coupler
Metallic duct coupler of aluminium, hinged, for coupling two cable ducts for blowing through cables. Up to air pressures 12 bars.

,Schälmesser für Mehrfachrohre,Burring tools,Paring knife,Tenaille pour arrondir conduit,Ebarber,275200,RK4040
,,,,275203,RK5050
,,,,275206,SW11
CodeTypeD-OD Max. press. kg
275200 RK 404040 12 bar 1,35
275203 RK 505050 12 bar 1,10
275206 SW 11Socked spinner wrench 0,18
15 | Cable duct connecting nipple
Cable duct connecting nipple for ducts, which are cut plain with the manhole wall. This connecting nipple with right- and left-hand thread enables a through-connection to blow-through cables. Afterwards the nipple can be opened lengthwise and be separated. Included are: 1 sickle spanner, 1 allan key and 2 pipe clamps.

,,,,410260,VB5050
,,,,410255,VB4040
CodeTypeNipple D-OD Length kg
410260 VB 5050ID 33 50 220 1,60
410255 VB 4040ID 25 40 220 0,90
16 | FigarO the cable basket
FigarO. The FOC basket is used is the cable is to long to be blown completely with only one blowing machine. If half of the cable is installed in one direction the remaining cable is pushed into the FigarO with the blowing machine. Out of the FigarO this part of the cable can be blown uncut in the opposite direction to finish the installation.
  • To handle the FigarO see suitable trailer below.
  • Cable Cap.: 3000 m D 8 / 2700 m D 12 / 2300 m D 14.
  • The FigarO replaces laying figure of 8 on the ground, is clean and space saving.
  • The FigarO is always placed besides the cable drum.
,FigarO,Schlaufenkorb,Karussell,Achterlegen,Achterkorb,FigarO-basket,Figarino,figure-eight,Panier de câble,Figaro,411210,SLK225
CodeTypeBasket-D kg
411210 SLK 2252250 159,00
17 | Trailer for FigarO
Trailer for the FigarO. After folding down both FigarO halves the cable can be pushed directly into the FigarO on an agreeable and safe height. Under the same condition the cable can afterwards also be blown into the duct. Trailer with alu platform, all side walls can be folded down. Height adjustable drawbar with ball coupling and parking brake.
  • On this trailer the FigarO can be replaced from pit to pit.
  • The cables stays away from mud on a good working height.
,Anhänger,Trailer-for-FigarO,,275800,FAN440
CodeTypePlatform size Total Hitch kg
275800 FAN 4402300x1520x400 750 kg 75 kg 320,00
18 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for CableJet and SuperJet and for duct ID up to 41 mm. Mounted on single axle trailer with height adjustable overrun drawbar. Incl. Diesel-Oxidation filter and particle filter. Emission standard IV and US-standard EPA Tier 4.
  • Deutz Diesel-engine, 105 kW. Compressor dimension: 5180x2130x1790
  • Flow rate 9,7 m³ at 14 bar, 10,70 m³, at 12 bar, 11,5 m³ at 7,0 bar working pressure
  • With integrated after cooler and water separator.
  • Incl. Diesel-Oxidation filter and particle filter
  • Diesel-Oxidation filter and particle filter. Emission standard IV and US-standard EPA Tier 4.
,,Compressors,Compresseur,960125,M125
CodeTypeAir Press. D-ID C-D kg
960125 M 1259,7-11,5 m³/min. 14-7 bar, s. above to 41 to 30 2.088,00
19 | Pressure release valve
Pressure release valve with sound absorber for compressors. Max. pressure 15 bar.

,,,,096010038,EVK34
,,,,275220,EVK15
CodeTypePress. For compressor kg
096010038 EVK 3415 bar MK 17 / M 31 1,30
275220 EVK 1515 bar M 125 2,70