1 | New Product - Intelli-MicroJet for FOC - complete new device
The first semi-automatic cable blowing unit with blowing assistant and electronic blowing data memory. Now in series production.

The new Intelli-MicroJet is a pioneering, intelligent blowing system that facilitates the blowing of fibre optic mini cables for the operator and improves installation quality. Cable layers as well as clients benefit from these improvements.

At the heart of the innovation is the measurement, presentation and control of the pushing force, which is transferred onto the cable by the drive system. The pushing force is constantly verified against the maximum permissible pushing force, which is determined through the crash test, and which will be specified in the cable data sheet in the future. A second assistant monitors the cable slippage. Both assistants give the operator an indication as soon the blowing procedure approaches a critical range and provide information on counter-measures. If the critical range is exceeded, the blowing unit stops. In this way, damage to cables can be avoided, the responsibility of the blow-in operator is relieved and the blowing quality is increased.

A clear blowing log with an electronic data transfer completes the new system. The new Intelli-MicroJet not only helps meet the minimum requirements for automatic logging of Deutsche Telekom but also the far-reaching demands for automated blowing processes. In addition to the new device, the Intelli-MicroJet can also be created from the tried and tested "MicroJet” blowing unit by means of an upgrade. With the Intelli-MicroJet, sustainability for further automation levels is also guaranteed. The main benefits for cable layers are:
  • Operators with little blowing experience can also achieve optimal blowing results with sensitivity and technical skill – the problem with the currently tight labour market can thus be alleviated.
  • The two blowing assistants indicate critical operating conditions and stop the blowing procedure before damage to the cable occurs.
  • Time savings for the blowing team and in order processing thanks to automatic data logging, archiving and electronic transmission.
  • The logging of blowing parameters can provide evidence of bad subduct routes and is thus a basis for legitimate variation orders.
  • The handling on the construction site is simple and nearly identical to current work with the MicroJet.
  • Customers also benefit from the use of the Intelli-MicroJet:
  • The automation of the blowing process will improve blowing performance and quality and reduce damage to cables, which increases the efficiency of FTTx projects.
  • Precise and clear logging of the agreed blowing performance facilitates the error detection, financial settlement and data archiving.
  • If damage to cables occurs at a later point, the original blowing log provides a reference for the blowing-out capability of the cable and can thereby reduce the repair time required (simplification of crisis scenario).
,Fiberoptic,Fibreoptic,Cableblowing-inequipment,Cablecoiler,Calibrationset,Souflage,Enrouleurbobines,Dérouleurcâbles,Jeuxcalibrage,Cablefibroóptico,Aparatosopladocables,Soplado,Aparatointermediariosoplar
CodeTypeMotor C-D Duct-D Air-supply Push kg
424200 PRMI 196Pneumatic 0,8-7,5 3-16 16 bar/1-2 m³/min. 140 N 40,00
2 | Upgrade of customer MicroJets PRM 196, PR 196 and PR 140
A customer MicroJet of the PRM 196; PR 196; PR 140 (from 2011) series with electronic counter VL 20 can be upgraded at Vetter to the Intelli-MicroJet version. An "upgrade” machine such as this has no disadvantages compared with the new device when put to practical use on the construction site. Earlier series bevor 2011 must be completed bevor the upgrade by a counter VL 20. All upgraded machines have the same performance as any new machine.
 
Upon customer request, during this upgrade the condition of the MicroJet can also be checked at the same time, a maintenance offer issued, if necessary, and carried out on acceptance of the service. In this way, the overhauled, newly upgraded Intelli-MicroJet blowing unit will once again be well prepared for the upcoming challenges of the various blowing projects.
,,,
CodeTypeMotor C-D Duct-D Air-supply Push kg
424220 PMIU 02Pneumatic 0,8-7,5 3-16 16 bar/1-2 m³/min. 140 N 27,00
3 | MicroJet for FOC, pneumatic
MicroJet pneumatic drive, combined machine with adjustable magnetic clutch for bundle fibres and for micro and mini cables from D 0,8-7,5 mm in ducts from D 3-12 mm. Air pressure 16 bar/1-2 m³/min. With digital length and speed meter. Without cable and duct inserts. Accessory and technical details see below.
  • Very careful but high power transmission to the cable through a magnetic clutch.
  • Suitable excellent for very long cable distances with complicated design.
  • Simple control, high safety for operator and for cable.
,,,
CodeTypeMotor C-D D-OD Air-supply Push kg
422210 PRM 196Pneumatic 0,8-7,5 3-12 16 bar/1-2 m³/min. adj. 0-140 N 23,60
4 | MicroJet for FOC, electro
MicroJet for blowing-in micro fibre optic cables. Electric drive with fine adjustment, especially for delicate cables and bundle fibres. With digital length and speed meter. Without cable and duct inserts. Accessory and technical details see below.
  • Very careful but high power transmission to the cable through a magnetic clutch.
  • Suitable excellent for very long cable distances with complicated design.
  • Simple control, high safety for operator and for cable.
,,,
CodeTypeEl-Motor C-D D-OD Air-supply Push kg
422200 EM 2524 Volt 0,8-3,5 3-7 15 bar/0,6 m³/min. adj. 0-25 N 16,30
5 | Receiver to EM 25
Receiver for connecting the MicroJet EM 25 to the net or to the compressor.

,,,
,,,
CodeTypeSupply from Tension kg
275600 NGE 24Net 230 to 24 volt 1,00
275603 NGE 12compressor 12 to 24 Volt 3,90
6 | Accessory-set for MicroJets
Accessory-set for MicroJet EM 25, PR 140 and PRM 196. All cable driving disc and cable and duct inserts for a certain cable and duct diameter range, according to table below.

,,,
,,,
,,,
CodeTypeSuitable for C-D D-OD kg
422230 SET 08-35EM 25, PRM 196 0,8-3,5 5, 7 1,37
422236 SET 36-75PR 196/PRM 196 3,6-7,5 7, 10, 12 2,00
422240 SET 08-75PRM 196 0,8-7,5 5, 7, 10, 12 3,00
7 | Duct insert for MicroJets
Duct insert separate for MicroJet PR 140, PR 196 and PRM 196, for bigger ducts OD 14 mm and for cables up to D 8 mm.

,,,
,,,
CodeTypeSuitable for C-D D-OD kg
42230132 REM 148PR 140/PR 196/PRM 196 to 7.5 14 0,12
42230134 REM 168Cable sealing to 7.5 16 0,12
8 | Cable sealing
Cable sealings suitable for cable blowing machines and cable-diam. according to table shown below.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeC-D For device Set kg
42230140 KAD 100,8-1,1 PRM196/EM25 10 0,01
42230141 KAD 121,2-1,4 PRM196/EM25 10 0,01
42230142 KAD 181,4-1,8 PRM196/EM25 6 0,01
42230143 KAD 241,8-2,4 PRM196/EM25 6 0,01
42230144 KAD 332,4-3,3 PRM196/EM25 6 0,01
42230147 KAD 433,4-4,3 PRM196/P02/NBK483 6 0,01
42230149 KAD 534,4-5,3 PRM196/P02/NBK483 6 0,01
42230151 KAD 635,4-6,3 PRM196/P02/NBK483 6 0,01
42230152 KAD 706,4-7,0 PRM196/P02/NBK483 6 0,01
42230154 KAD 777,1-7,7 PRM196/P02/NBK483 6 0,01
9 | Duct sealing for MicroJets and MiniJets
Duct sealing, sets of 6 pcs. suitable for cable blowing machines and duct-diam. according to table shown below.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-OD For device Set kg
42230163 RAD 033 PRM196/EM25 6 0,01
42230164 RAD 044 PRM196/EM25 6 0,01
42230165 RAD 055 PRM196/EM25 6 0,01
42230167 RAD 077 PRM196/EM25/P02 6 0,01
42230168 RAD 088 PRM196/P02 6 0,01
42230170 RAD 1010 PRM196/P02 6 0,01
42230172 RAD 1212 PRM196/P02 6 0,01
42024014 RAD 1414 PRM196/P02 6 0,01
10 | Compressor diesel engine
High powered compressors for blowing-in bigger fibre optic cables. Suitable for MiniJet, for duct ID up to 20 mm. Mounted on single axle trailer with height adjustable drawbar, without overrun brake.
  • Kubota Diesel-engine, 24,1 kW. Compressor dimension: 3190x1260x1300
  • Flow rate 1,90 m³, at 14 bar working pressure
  • With integrated after cooler and water separator. Air discharge valve: 2 x G 3/4"
,,,
CodeTypeAir Press. D-ID C-D kg
960121 M 311,90 m³/min. 14 bar 3-16,0 to 10 585,00
11 | Compressor electric motor
Compressors with electric motors and integrated after coolers. For blowing-in fibre optic min cables, fibres and bundle fibres up to length of 500 m and more. Mounted on 2 pneumatic wheels, which enables the transport on stairs for one person alone. Suitable for MicroJet EM 25.
  • Electric motor 7,5 kW, 400 Volt, compressor dimensions: 1080x800x790
  • Flow rate 620 l/min. at 15,0 bar working pressure
  • With separate after cooler. Air discharge valve: 1 x G 3/4"
,,,
CodeTypeAir Press. D-ID C-D kg
960114 ME 13620 l/min. 15 bar 3-8,0 0,8-6,0 205,00
12 | Compressor petrol engine
Compressor with petrol engine and after cooler. For blowing-in fibre optic mini cables, fibres and bundle fibres. Suitable for all MicroJets and for MiniJet P 02. The external after cooler reduces the compressed air temperature approx. 8° C above ambient temperature. The compressor is equipped with a sound absorption cover. It is portable by two pneumatic wheels.
  • With Honda-petrol engine 16 kW. Dimension: 1080x800x790
  • Flow rate 1000 l/min. at 15,0 bar working pressure.
  • With separate after cooler electrical feeded by the compressor. Air discharge valve: 1 x G 3/4"
  • As accessory see tiltable support for after cooler, table below.
,,,
CodeTypeAir Press. D-ID C-D kg
960118 MK 17.21,0 m³/min. 15 bar 3-12,0 0,8-9,0 206,00
13 | Support for after cooler
Support for the after cooler on compressor MK 17.2. Steel frame hot galvanized. With this the after cooler is fixed safe and rubbery-elastic by four elements.
 
To transport the compressor in a van the after cooler is tiltable, please mind the total height of approx. 1,10 m. The after cooler can easily be dismounted from the support.
  • Dimension with vertical positioned after cooler, L/W/H 1170/800/1220
  • Dimension for transportation with tilted after cooler, total height only 1100
,,,
CodeTypeMaterial kg
960145 KHN 17.2Steel profiles, galvanized 8,50
14 | Compressor electric motor
Compressors with electric motors and integrated after coolers. For blowing-in fibre optic min cables, fibres and bundle fibres up to length of 500 m and more. Mounted on 2 pneumatic wheels, which enables the transport on stairs for one person alone. Suitable for MicroJet EM 25.
  • Electric motor 2,2 kW, 400 Volt, IP 55, compressor dimensions: 1150/580/540
  • Low sound level of 69 dBA(A).
  • 3-fold air filters, clean, dry, oil- and water-free air.
  • With integrated after cooler and water separator. Air discharge valve: 1 x G 3/8"
  • Convenient for one man stair transports.
,,,
CodeTypeAir Press. D-ID C-D kg
960111 VE 240240 l/min. 10,5 bar 2,5-6,0 0,8-4,0 54,00
15 | Lubricator automatic device
Lubricator for continuous greasing of the cables blown by MicroJet, MiniJet and UltimaZ. Performance and techn. details see below. Article with accessory klick here!
  • The Lubricator guarantees an uniform lubrication on the whole length duct length.
  • To mount on MiniJet there are adapters, see below.
  • In the Lubricator is included an adapter for the MicroJets EM 25, PR 140 and PRM 196
,,,
CodeTypeSuitable to C-D D-OD kg
423500 L 9MiniJet+MicroJet 1-9 4-16 2,20
16 | Lubricant for FOC
Micro Jetting Lube, lubricant for blowing-in fibre optic cables. Excellent lubricating effect. Adheres to the duct wall and leaves the cable nearly dry, an advantage for over blowing and working in cascades with further blowing machines. Consumption approx. 10 ml per 1000 m at duct-ID 10 mm. For other duct-ID analogue

For lubrication unique and ultimate classification, Water pollution class - non-hazardous, acc. to VCI-Conception. Safety data sheets are available.
,,,
,,,
CodeTypePack. drums kg
234975 MJL 2401 bottle 0,24 l 0,32
234977 MJL 42424 bottles 0,24 l 7,50
17 | Duct cleaning sponge
Sponge for sub duct cleaning and pre-lubricating prior to cable blowing

,,,
,,,
,,,
,,,
,,,
CodeTypeD-OD D-ID Cellular Qty. kg
275398 RSM 047 4 D 8x30 20 pcs. 0,01
275400 RSM 067-10 5-6 D 8x50 20 pcs. 0,01
275402 RSM 0810-12 8 D 16x50 20 pcs. 0,02
275404 RSM 1012-16 10-12 D 20x50 20 pcs. 0,03
275406 RSM 1620 15-16 D 32x50 20 pcs. 0,06
18 | Intermediate cable blowing head
Intermediate blowing head for finishing the left loops after blowing in two direction. Without duct inserts, without cable sealing. Max. pressure 16 bars.

,,,
,,,
,,,
,,,
CodeTypeC-D D-OD kg
275700 NBK 4833,4-8,3 7-16 1,40
275703 NBK 8128,4-12,4 12-20 1,50
275710 DAP 08Air connector for NBK 483 0,50
275712 DAP 11Air connector for NBK 812 0,73
19 | Duct inserts for Lubricator and intermediate blowing head
Duct inserts with 2 sealing for Lubricator and intermediate blowing head for duct-D see table below.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-OD For device kg
423530 RES 44 Lubricator L 9 0,04
423532 RES 55 Lubricator L 9 0,04
423534 RES 77 Lubricator L 9 0,03
423536 RES 88 Lubricator L 9 0,03
423538 RES 1010 Lubricator L 9+Intermed. blowing head 0,03
423540 RES 1212 Lubricator L 9+Intermed. blowing head 0,03
423542 RES 1414 Lubricator L 9+Intermed. blowing head 0,03
423544 RES 1515 Lubricator L 9+Intermed. blowing head 0,03
423546 RES 1616 Lubricator L 9+Intermed. blowing head 0,03
423548 RES 2020 Intermediate blowing head 0,03
20 | Duct single sealing to intermediate blowing head and Lubricator
Duct single sealing to intermediate blowing head and Lubricator, for ducts-D see table below.

,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
,,,
CodeTypeD-OD For device kg
042353801 RDL 44 Lubricator L 9 0,01
042353802 RDL 55 Lubricator L 9 0,01
042353803 RDL 77 Lubricator L 9 0,01
042353804 RDL 88 Lubricator L 9 0,01
042353805 RDL 1010 Lubricator L 9+Intermed. head 0,01
042353807 RDL 1212 Lubricator L 9+Intermed. head 0,01
042353809 RDL 1414 Lubricator L 9+Intermed. head 0,01
042353810 RDL 1515 Lubricator L 9+Intermed. head 0,01
042353811 RDL 1616 Lubricator L 9+Intermed. head 0,01
21 | Cable unwinder
Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.
  • Collapsible for easy transportation to the site.
  • Easy movable with the drum through big rubber coated wheels.
  • For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
  • As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.
,,,
,,,
,,,
,,,
CodeTypeEquipment Shaft Cones for kg
320290 KTA 8Winder as above D 25 Hole D 25-80 11,60
320292 KTA 8WSteel tube shaft D 50 See next line 2,05
315504 ZKP 50-80Poly-cone (1 each) D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Poly-cone (1 each) D 50 Hole-D 50-108 0,39
22 | Drum unwinding stand for FOC
Drum unwinding stand for FOC or subduct drums, galvanized. Equipped with a lightweight aluminium shaft D 75 mm with drum shaft securing and 2 clamps.
  • Sturdy steel construction, hot galvanized, easy dismountable by hand for transportation.
  • Two crank spindles to lift the stand for unwind cables in any position.
  • High stability under load even in uneven places.
  • For drum-D to 1400, and drum width to 900, drum weight max. 500 kg.
  • As accessory alu-drum shaft D 50, ball bearings, order clamps and cones separately, see table below.
  • Dimensions mounted: L/W/H 1450/1400/689.
,,,
,,,
,,,
,,,
,,,
CodeTypeEquipment Shaft Cones for kg
344355 TRG 1140Winder as above D 75 --- 96,00
350592 TAK 5013Alu drum shaft D 50 --- 7,40
315030 KSV 51Shaft clamps D 50 --- 1,30
315504 ZKP 50-80Poly-cone (1 each) D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Poly-cone (1 each) D 50 Hole-D 50-108 0,39
23 | Compressor electric motor
Compressor with electric motor for blowing-in optic bundle fibres and mini cables in in-house installation. 230 Volt, without after cooler. Portable and transportable on 2 wheels. Soundproof hood. Suitable for Ultimaz P2P.
  • Electric motor 1,1 kW, 230 Volt, compressor dimensions: 560/350/560
  • Capacity 100 l/min. at 12 bar.
  • Soundproof hood 71 dB(A).
  • Pressure reservoir 4 litre
,,,
CodeTypeAir Press. D-ID C-D kg
960102 VE 100100 l/min. 12 bar 2,5-5,5 0,8-4,0 31,00
24 | Compressed air hose
Compressed air hose DN 10, L 5 m, with swing-coupling and connecting standard nipple for UltimaZ P2P to compressor VE 100

,,,
CodeTypeDN Press. Length kg
042334015 DLS 10/510 15 bar 5 m 1,30
25 | Y-piece with accessory
Y-piece for connection of 2 compressors VE 100, with same pressure and volume of 15 bar and 0,24m³/min. Incl. 2 non-return valves. Connection parts are not included, the need is as following:
  • For duct-Ø 10 - Code 275.766, DAM 10, Air-connector
  • For duct-Ø 12 - Code 275.768, DAM 12, Air-connector
  • For compressor connection: 2 air hoses Code 0423.340.15, DLS 10/5, see below
,,,
,,,
,,,
CodeTypeMax. press. D-OD kg
275775 YVE 1615 bar --- 1,10
275766 DAM 1010 bar 10 0,08
275768 DAM 1210 bar 12 0,10