1 | Cable trailer hydraulic loading, 80 km/h
Cable trailer hydraulic loading for lorry transport up to 80 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below.
 
*Payload without accessory. By mounting accessories like hydraulic drum drives, drum disc brake etc. the payload will be reduced according on the weights of the accessories.
  • With air brake systems EBS incl. ABS for speed up to 80 km/h.
  • Through stub axles the trailers are open to the rear for receiving the cable drum.
  • Big ground clearance through long lifting hydraulic jacks.
  • The trailers are equipped with rear and side protections according to EC Directive 2007/46/EG
  • Standard painting RAL 2011 with parts partial hot galvanized. Special painting as accessory possible.
,,,,343450,KVH4,5/80
,,,,343600,KVH6,0/80
CodeType*Payload Total Drum-D Hitch Int./Ext. kg
343450 KVH 4,5/804500 kg 6000 kg 1800-3200 700 kg 1700/2550 1.450,00
343600 KVH 6,0/806000 kg 7500 kg 1800-3200 700 kg 1700/2550 1.450,00
2 | Cable trailer hydraulic loading, 25 km/h
Cable trailer hydraulic loading for lorry transport up to 25 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below.
 
*Payload without accessory. By mounting accessories like hydraulic drum drives, drum disc brake etc. the payload will be reduced according on the weights of the accessories.
  • With air brake systems EBS incl. ABS for speed up to 80 km/h.
  • Through stub axles the trailers are open to the rear for receiving the cable drum.
  • Big ground clearance through long lifting hydraulic jacks.
  • The trailers are equipped with rear and side protections according to EC Directive 2007/46/EG
  • Standard painting RAL 2011 with parts partial hot galvanized. Special painting as accessory possible.
,,,,343580,KVH5,8/25
,,,,343730,KVH7,3/25
CodeType*Payload Total Drum-D Hitch Int./Ext. kg
343580 KVH 5,8/255800 kg 7300 kg 1800-3200 700 kg 1700/2550 1.450,00
343730 KVH 7,3/257300 kg 8800 kg 1800-3200 700 kg 1700/2550 1.450,00
3 | Small drum suspension
Small drum suspension for drums below D 1800-800 mm for all KVH-types, but not for driving these drums by hydraulic drum drives.

For hydraulic drive of such small drums of diam. 800-1800 mm, see next table, drum support 346600 TAV 100, can also be retrofitted.
,,,,350942,KVZ180
CodeTypeSuitable for Drum-D Ext. width Shaft-D kg
350942 KVZ 180KVH 4,5-7,3 800-1800 2550 76 mm 68,00
4 | Drum support for small drums
Additional support in front of all trailers KVH for winding and unwinding small drums D 800-1800 of maximum 2t. Winding by the hydraulic drum drives of the trailers. One set exists of one right-hand and one left-hand support. For loading these drums a lifting equipment is necessary.
 
Non additional drum shaft is necessary, the standard shaft of the trailer can be used.
,,,,346600,TAV100
CodeTypeSuitable for Drum-D Max. kg
346600 TAV 100KVH 4,5-7,3 800-1800 2 t 19,00
5 | Rotating steel drum shafts
Surcharge for rotating drum shafts of steel tubes. With rotating shafts cable drums unwind much easier. We recommend also the use of the cones to unroll the cable drum true. With this steel drum shaft the drum disc brake can be used.
  • If no drum disc brake is necessary the use of below mentioned light alu drum shaft is recommended.
,,,,350480,TSK7620
CodeTypeSuitable for D/length kg
350480 TSK 7620KVH 4,5-7.3 76/20/1888 51,80
6 | Rotating alu drum shafts
Surcharge for rotating drum shafts of aluminium. With rotating shafts cable drums unwind much easier. We recommend also the use of the cones to unroll the cable drum true. With this aluminium drum shaft the drum disc brake can not be used.

,,,,350690,TAS7519
CodeTypeSuitable for D/length kg
350690 TAS 7519KVH 4,5-7.3 75/1888 29,00
7 | Hydraulic drum drives
Cable drum drive both sides, forwards and reverse, with engine on the trailer for all cable trailers KVH 4.5-7.3.
 
Hydraulical pressing of the driving wheels on the drum flange, lifting and lowering of the drum. Remote control equipped with 6 m cable. (Radio control as option see below code 351608 TOF 600)
  • Hydraulic drive by hydraulic engines with electric starter on the trailer.
  • Pulling force on cable depending on drum diameter to approx. 5,0 kN.
  • Winding and unwinding speed depending on the drum diameter approx. 0-50 m/min.
,,,,351600,TBH600
,,,,351602,TDH600
CodeTypeDrive of Engine kW kg
351600 TBH 600Drum and jack lift Petrol 9.6 260,00
351602 TDH 600Drum and jack lift Diesel 6.8 280,00
8 | Radio control for drum drives
Radio control for drum drive and drum lifting for all cable trailers KVH 4.5-7.3 for all operations drum lifting and lowering, pressing the drive rollers to the drum, winding and unwinding the cable with control of the speed.
,,,,351608,TOF600
CodeTypeFunctions kg
351608 TOF 600See above 20,00
9 | Drum drives for external hydraulic
Cable drum drive, forwards and reverse, for external hydraulic connection of the towing vehicle. For all cable trailers KVH 4.5-7.3.
 
Hydraulical pressing of the driving wheels on the drum flange, lifting and lowering of the drum. Remote control equipped with 6 m cable. (Radio control as option see below code 351608 TOF 600)
  • Hydraulic drive supplied by the towing vehicle or other external hydraulics.
  • Pulling force on cable depending on drum diameter to approx. 5,0 kN.
  • Winding and unwinding speed depending on the drum diameter approx. 0-50 m/min.
,,,,351605,TFH600
CodeTypeDrive of Hydraulic drive kg
351605 TFH 600Drum and jack lift External hydraulic 225,00
10 | Cable drum disc brake
Cable drum disc brake with drum fork for controlled unwinding of cable or line drums. Hand mechanical setting of the braking force. To use it with KVH-types cones code 315430, ZKO 76 are necessary.

,,drum-disc-brake,Frein à disque,350860,STB400
CodeTypeOperation Braking At the cable kg
350860 STB 400Mechanical 3200 Nm approx. 4,0 kN 46,00
11 | Clamps for drum shafts
Clamps, new construction reinforced, hinged, for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. Hinged version, steel galvanized. Width 61 mm.

,,,,315045,KSV76
CodeTypeFor shaft Width kg
315045 KSV 76D 75-76 61 1,50
12 | Locating cones for drum shafts
Locating cone for drum shafts made of cast steel including clamp. With several steps for drum bores according to DIN.

,,,,315430,ZKO76
CodeTypeFor shaft Steps-D kg
315430 ZKO 76D 75-76 140/130/125/105/100/90 5,50