1 | Cable soiling and spooling machine C-D 1-30 mm, official calibration not possible.
This small but effective electrical ring coiler are primarily used by electrical wholesalers and industry. It is intended for the frequent and professional winding of smaller cables, wires or lines from delivery drums onto rings. Using a spool as an accessory, lengths of cable can also be rewound from larger drums to smaller ones.

This electrical cable and ring coiling machine DE 30 for cable diameters up to 30 mm is equipped with the latest technique and also sensitive fibre optic cables can be spooled very well. The frequency controlled drives enable gentle, automated start-up and braking to protect the cable and for highly accurate measurements. This machine can be equipped with an automatic cable layering feature that increases performance even further.

An universal cable coiling and spooling machine for cables from 1-30 mm. Suitable for coiling and spooling on smaller drums up to dia. 800 mm, of width to 340 mm. Two speed steps between 0-140 rpm can be adapted to the cable diameter and its sensitivity. An automatic blocking device avoids to work with the wrong speed. DE 30 therefore is a machine for two applications: spooling of small electronic or telecommunication cables with high speed and spooling of bigger cables with reduced speed. For sensitive cables there is a possibility to limit the pulling force.

Simple and easy understandable operation through touch-screen with additional mechanical push-button. Potentiometer mounted on a pivoting operator panel. Type DE 30SF with electronic automatic cable traversing provides an even alignment of the cable on the drum. Adjustment of the reversal points is done by push-buttons and input of the cable diameter by a control dial. Corrections of both parameters during the winding procedure are possible through laser pointer. On type DE 30 F cable traversing is done manually by the operator. Further technical details and accessory like coil winders and cable cutters see internet or pdf-leaflet no. 322
The appropriate length measuring equipment can be selected for this device. It is also possible to permanently mount cable cutting equipment to the measuring machines.
  • Driving power of electric motor 230/400V, 0,75 kW, torque 130 Nm.
  • Frequency controlled soft start and soft stop. Capacity 100 kg.
  • For drums to 400 mm 0-140 rpm, for drums > 400, 0-80 rpm.
  • Electronic pre-set counter for pre-selection of the cable length with automatic cut-off.
  • Compact construction for easy rotating in shelf corridors. Dimension 1680x900x1200.
  • These DE 30../MZ are only for internal use. Official calibration not possible.
  • For length measuring machines with mechanical counter. Upgrading with MID not possible.
CodeTypeC-D L-meter Traversing Drum-D kg
322326 DE 30F/MZ1-30 MZ 20-40 manual D 800x340 212,00
322327 DE 30SF/MZ1-30 MZ 20-40 automatic D 800x340 252,00
2 | Power lead
Power lead from top to coiling machines DF 26-32 F/SF, two-piece. As accessory or for retrofitting of earlier supplied machines.

CodeTypeSuitable for Height kg
322371 SZ 3DE 30F/SF 2,30 m 3,10
3 | Cable and wire length measuring machines, mechanical counter
Cable and wire length measuring machines with mechanical counter without data storage, for stationary applications. Very robust steel construction. Due to the big perimeter of 1 m, high accuracy of ± 0,5 %, accuracy class III, at temperatures of 5-40°C. May only be used for purely internal use, not for sales of cables.
  • Types MZ ... only for insulated cables, types MZ ... S also for bare metal goods.
  • The accuracy refers to a calibrated cable of a length of at least 5 m.
CodeTypeC-D St-rope L/W/H mm kg
323730 MZ 201-20 no 360/280/400 16,00
323735 MZ 20S1-20 1-8 360/280/400 16,00
323750 MZ 403-40 no 550/300/420 28,00
323755 MZ 40S3-40 3-22 550/300/420 28,00
4 | Calibration of length measuring machines HK/HD/KDM/KLM/MZ
To confirm the testing of length measuring devices, HK/HD/KDM/KLM/MZ, according to ISO 9001 and other QM systems the calibration (KA 001) executed by Vetter is sufficient in most cases. On the other hand the calibration does not replace the EU conformity assessment whenever it comes to commercial sales of cables.

CodeType kg
323710 KA 001 0,01
5 | Automatic cable diam. identification device
Automatic measuring device for identify the cable-d in all length measuring machines on cable spooling machines. The electronic cable traversing unit takes over the electronic measured values self-dependent. Manually correction of cable diameter with potentiometer in operator panel is also possible.

CodeTypeFor mounting on kg
322950 ACD 75DE 30SF 1,10
6 | Roller bow
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines MZ or M. Steel rollers D 25 mm.
  • Type RB 4090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers D 25.
CodeTypeSuitable for C-D Pass Bend L/W/H mm kg
322783 RB 4090M/MZ 40 max. 40 45x45 90° 400x180x380 10,10
3227831 RBS 4090M/MZ 40/40S max. 40 45x45 90° 400x180x380 10,50
7 | Coil winder fixed centre
Conical coil winder with fixed centre without foot. For mounting the coil winder on the electric machines, the adapter DWA 20 is to be ordered. Capacity 10 kg.

CodeTypeC-winder to C-winder dimens. C-D/m kg
322624 DW 18DE 30F/SF D 300/80-90, int. 60 5/70, 10/16 2,80
322626 DW 20DE 30F/SF D 380/150-170, int. 100 5/200, 10/50 3,30
8 | Adapter for coil winders
Adapter for coil winders on electric coil winding machines

CodeTypeSuitable for On machine kg
322620 DWA 20DW 18+DW 20 DE 30 3,00
9 | Coil winder collapsible
Coil winder adjustable in diameter and width. Collapsible for fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. As accessory also available eccentric clamp code 322.875, KE 41 for cable-D 5-30 mm. Capacity 100 kg.

CodeTypeC-winder to C-winder dimens. C-D/m kg
322634 DW 26VKDE 30F/SF D 600/200-420, int. 35-200 10/340, 20/65 27,00
10 | Coil winder collapsible
Coil winder adjustable in diameter and width. Collapsible for fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. Incl. eccentric clamp for cable-D 5-30 mm. Capacity 100 kg.

CodeTypeC-winder to C-winder dimens. C-D/m kg
322639 DW 30VKDE 30F/SF D 800/350, int. 80-200 10/600, 20/140 29,00
11 | Eccentric clamp
Eccentric clamp for fixing the cable head to the coil winder for winding procedure.

CodeTypeSuitable for For C-D kg
322875 KE 41Coil winder DW 26 VK 5-30 0,30
12 | Adapter for drums
Adapter for wooden or plastic drums on electric coil winding machines DE 30. Capacity 100 kg.

CodeTypeSuitable for Drum-D max. Drum width kg
322672 DS 32DE 30F/SF 850 330-400 5,50
13 | Cable ring unwinder
Cable ring unwinder, without support TK 10.

CodeTypeSuitable for For cable rings kg
322610 DA 70DE 30F/SF D 160-600, height 270 8,40
322611 DA 80DE 30F/SF D 160-700, height 270 9,40
322614 TK 10DE 30F/SF Support to DA 70, DA 80 + RB 45 8,20
14 | Roller bow with adapter
Roller bow with adapter for support for unwinding cables from drums of upper stands. Please order support TK 10, code 322.614 separately.

CodeTypeSuitable for kg
322613 RB 45DE 30F/SF 6,80
15 | Hand cutter
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines MZ/M 20-40.

CodeTypeSuitable for For C-D St-rope kg
322810 HK 35MZ/M 20-40 35 no 5,80
322812 HS 35MZ/M 20S-40S 10 10 6,30