1 | Cable tray rollers
Cable tray rollers with fixing clamps for attachment outside and inside the tray edge.

,Cable-tray-rollers,Cable-frame-guide-rollers,Galets-chemins-câble,Galets-guidage-câble,Rodillos-rulos-guíador-cables-canaletas,Rodillos-rectos-cables
CodeTypeRoller-D Mat. SWL kg
278050 PRK 140D 140/86x58 Alu 100 kg 2,10
2 | Cable tray corner roller
Cable corner roller with fixing clamps for attachment outside and inside tray bows.

,,,
CodeTypeRoller-D Mat. SWL kg
278100 PRE 140D 140/86x58 Alu 100 kg 2,40
3 | Cable tray flank roller
Cable tray flank roller with fixing clamps for attachment outside of the tray. By turning the roller, inside or outside cable curves can be pulled. For cable-Ø max. 40 mm.

,,,
CodeTypeRoller-D Mat. SWL kg
278150 PRF 4242/149 Steel 100 kg 1,65
4 | Cable tray rollers
Cable tray roller for pulling-in of several cables one after the others. Two lateral rollers can be turn down to lay the cables in the trays. Low construction. This roller can be taken away underneath the tray. Steel construction galvanized with polyamide rollers.

,,,
,,,
CodeTypeExt. Width Wheels SWL kg
278340 PRS 150150 6 / D 35 100 kg 1,20
278360 PRS 250250 11 / D 35 100 kg 1,84
5 | Cable tray rollers
Cable tray roller, 2 polyamide rollers-rollers, low construction steel construction galvanized of only 60 mm height.

,,,
CodeTypeExt. Width Wheels SWL kg
278370 PRR 195195 2 / D 25 100 kg 0,84
6 | Cable tray rollers
Cable tray roller for inside the tray with cross members of 500 mm spanning the tray. After pulling this roller can be removed below the tray. Steel construction galvanized with 1 alu-roller.

,,,
CodeTypeAlu-roller L/W/H mm SWL kg
278410 PRC 1D 88/50x100 490/144/47 100 kg 2,60
7 | Cable tray rollers
Cable tray rollers of 3 rollers for smaller cables up to D 30 mm, with clamp. Steel construction galvanized.
  • Can be fixed on the tray edge, swivelling in- or outside of the tray.
  • The barrier roller produces a safe cable guidance.
,,,
CodeTypeRoller-D Opening SWL kg
278470 PRK 3-5333 53 100 kg 1,80
8 | Cable tray rollers
Cable tray rollers of 3 rollers for bigger cables, with clamp. Steel construction galvanized. Can be fixed outside or inside the tray in order to locate the cable in the trays. Without support. The roller can be closed with the barrier roller to achieve an accurate cable guidance.
  • Can be fixed in- or outside on 2 tray edges.
  • After the pull the cable can be simply put into the cable tray.
  • The barrier roller completes a safe guidance for the cable.
  • Tray holder to be ordered separately, see below.
,,,
CodeTypeRoller-D Opening SWL L/W/H mm kg
278540 PRK 3-8540 85x85 150 kg 222x189x85 2,80
9 | Cable tray rollers
Cable tray rollers of 3 rollers for bigger cables. Steel construction galvanized. Can be fixed outside or inside the tray in order to locate the cable in the trays. Without support. The roller can be closed with the barrier roller to achieve an accurate cable guidance.
  • Can be fixed in- or outside on 2 tray edges.
  • After the pull the cable can be simply put into the cable tray.
  • The barrier roller completes a safe guidance for the cable.
  • Tray holder to be ordered separately, see below.
,,,
CodeTypeRoller-D Opening SWL L/W/H mm kg
278570 PRK 3-10042 100x100 150 kg 252x240x100 4,10
10 | Barrier rollers
Barrier roller for cable tray rollers, with axle and screws. Steel galvanized.

,,,
,,,
,,,
CodeTypeSuitable for Roller-D SWL kg
278480 PRV 1-53PRK 3-53 33/112 150 kg 0,30
278550 PRV 1-85PRK 3-85 40/134 150 kg 0,50
278580 PRV 1-100PRK 3-100 42/190 150 kg 0,75
11 | Cable guide rollers
Cable guide rollers, 4 high wattage-rollers of thick wall steel with ball bearings. Opening in all positions. Steel construction galvanized. accessory for fixing on canal braces, on mounting base or on profiles are available.

,,,
,,,
,,,
,,,
CodeTypeOpening SWL L/W/H mm kg
202131 ER 4-100S100x100 500 kg 325x325x153 12,00
202132 ER 4-125125x125 500 kg 350x350x153 14,00
202137 ER 4-150150x150 500 kg 375x375x153 14,50
202145 ER 4-200200x200 500 kg 425x425x153 17,20
12 | Supports for cable guide rollers
Parts for supporting and fixing a.m. cable guide rollers ER 4-100-300 these standards can be screwed on all sizes. Special supports adapted to any kind of profiles are available at short notice.

,,,
,,,
,,,
,,,
,,,
CodeTypeDesignation Suitable for For kg
205401 KSP 10Brace retainer ER 4-100S Braces D 45-60 2,00
205402 KSP 12Brace retainer ER 4-125-300 Braces D 45-60 3,00
202168 BF 4-100SMounting base ER 4-100S Fixing on the floor 5,00
202170 BF 4-300Mounting base ER 4-125-300 Fixing on the floor 5,80
205420 KSA 22Support connector ER 4-125-300 Fixing on profiles 7,00
13 | Tray roller supports
Cable roller holder for below mentioned cable tray rollers, steel galvanized.

,,,
,,,
CodeTypeSuitable for Length kg
278710 PRH 3-615PRK 3-85+3-100 615 1,50
278770 PRH 4-715ER 4-100-250 715 5,00
14 | Guide roller support
Support for fixing guide rollers on suspension stays 16 A1 or 16 A3. With it the guide rollers can be fixed in any position, e.g. vertical or horizontal suitable for pulling heaviest cables. Steel galvanized.
,,,
,,,
CodeTypeSuitable for Needed per roller L/W/H mm kg
278720 PRH 3-145PRK 3-85+PRK 3-100 2 153x80x70 0,90
278725 PRH 4-250ER 4-125-250 1 230x178x90 3,00
15 | Cable tray bow
Cable tray curve unit 90° angle with 4 alu rollers. Bending radius 400 mm. Compact version allows application under difficult conditions. Steel construction galvanized.

,,,
CodeTypeRoller-D / Mat. Bend-Rad C-D SWL L/W/H mm kg
278780 PRB 90/40090/50x100, Alu 400 100 300 kg 500x500x140 7,80
16 | Cable tray bow
Cable tray curve unit 45° angle with 3 alu rollers. Bending radius 600 mm. Compact version allows application under difficult conditions. Steel construction galvanized.

,,,
CodeTypeRoller-D / Mat. Bend-Rad C-D SWL L/W/H mm kg
278820 PRB 45/60090/50x100, Alu 600 100 300 kg 500x500x140 7,10
17 | Cable tray corner rollers
Cable tray corner roller, 45°, 3 steel rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Suitable for heavy cable pulls.

,,,
CodeTypeRoller-D / Mat. Rad. C-D SWL L/W/H mm kg
202760 SE 3-45S120/76/145, Steel 700 100 500 kg 530x430x230 14,40
18 | Cable tray corner rollers
Cable tray corner roller, 90°, 3 steel rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Suitable for heavy cable pulls.

,,,
CodeTypeRoller-D / Mat. Rad. C-D SWL L/W/H mm kg
202820 SE 6-90S120/76/145, Steel 700 100 500 kg 750x750x230 24,60