Navigationen überspringen, zum Seiteninhalt
1 Cable drum and coiling machines

PDF-Sheet
Cable drum and coiling machines for cables and wires. For use in cable stores at distributors, industrial plants etc. Winding and measuring from drum to drum or to coil. Machine in stable steel construction. Drum shaft for bores from 60 mm with cones clamped by hand. Cable traversing with ball bearings to mount length measuring equipment LM 20 - LM 40, moving by hands. Electronic pre-set counter included as standard equipment. Included safety cage with automatic switch-off. Easy displacement through big wheels. Further accessory see below.
 
• For winding from drum to drum or von drum to coils.
• Frequency controlled drive with soft start and soft stop
• Winding speed 15-80 rpm
• DTR .... F -drum lifting by hand-hydraulic.
• DTR .... FH - drum lift by electro-hydraulic
CodeTypeC-D Drum-D E-motor Cap. L/W/H m kg
322380 DTR 80F3-35 400-800 1,1 kW/230 V 400 kg 1,6/1,4/1,4 315,00
322382 DTR 80FH3-35 400-800 1,1 kW/230 V 400 kg 1,6/1,4/1,4 346,00
322387 DTR 100FH3-40 400-1000 1,5 kW/400 V 800 kg 1,8/1,7/2,0 500,00
2 Cable and wire length measuring machines

PDF-Sheet
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
 
• Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
• The measuring accuracy of all LM machines is of ± 0,2 %.
• The accuracy refers to a cable length of at least 20 m.
• Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
• In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
CodeTypeCable-D Steel rope L/W/H mm kg
322736 LM 201-20 mm no 360/280/400 13,20
322737 LM 20S1-20 mm 1-8 mm 360/280/400 13,50
322742 LM 403-40 mm no 550/300/420 28,50
322743 LM 40S3-40 mm 3-22 mm 550/300/420 28,50
3 Leading bushings

PDF-Sheet
Leading bushings for thin cables and ropes to length machine LM 20 and LM 20 S. Set of 2 paces., easy to change.
CodeTypeSuitable for Cable/wire-D Mounted kg
322738 BU 06LM 20/20 S <= 5 mm no, accessory 0,16
322739 BU 14LM 20/20 S <= 12 mm yes, LM 20 S 0,16
4 Leading rollers

PDF-Sheet
Leading in- and out rollers for fitting on cable length measuring machines LM 20 and LM 20 S. 4 steel rollers
CodeTypeSuitable for Cable/wire-D kg
322741 ER 20LM 20/20 S max. 20 mm 1,20
5 Roller bow

PDF-Sheet
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM. Steel rollers D 25 mm.
 
• Type RB 4090 and 6090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers.
• Type RB 4018 and 6018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers.
CodeType Cable-D Passage Deviation L/W/H mm kg
322783 RB 4090LM 40/40 S max. 40 mm 45x45 mm 90° 400x180x380 10,10
322784 RB 4018LM 40/40 S max. 40 mm 45x45 mm 180° 400x180x450 11,00
6 Calibration of length meters

PDF-Sheet
Official calibration by authorized institute before dispatching the measuring machines LM 20-LM 80 S.
 
• EI 01 - official calibration is necessary if cables are sold per meter to customers.
• First official calibration can be done before supplying the winding machineries.
• Repeating calibration have to be carried out in intervals of two years on customers place.
• KA 01 - no official calibration by the supplier replaces in many cases the official calibration.
• KA 01 - very suitable for your own ISO 9000 Certification
CodeType kg
322791 EI 01 0,01
322795 KA 01 0,01
7 Hand cutter

PDF-Sheet
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines LM 20-40.
CodeTypeSuitable for For cable-D For steel ropes kg
322810 HK 35LM 20 35 mm no 5,80
322812 HS 35LM 20 S 10 mm 10 mm 6,20
322815 HK 40LM 40 40 mm no 5,30
322816 HS 40LM 40 S 14 mm 14 mm 4,80
8 Cable cutting head, hydraulic

PDF-Sheet
Cable cutting head, hydraulic for mounting on cable length measuring machines types LM, for cutting insulated CU- and AL-cables, not for steel ropes.
CodeTypeSuitable for For cable-D For steel ropes kg
322818 HK 40HLM 40 40 mm no 11,00
322821 HK 60HLM 60 60 mm no 14,50
9 Cutting-off machine

PDF-Sheet
Cutting-off machine for cables and ropes, suitable for CU, Al, ST. Range of diameter see table below.
CodeTypeSuitable for For CU / AL cable For steel ropes kg
322802 TD 40LM 40 up to Ø 22 mm up to Ø 22 mm 11,00
322804 TD 60LM 60 up to Ø 32 mm up to Ø 32 mm 14,50
10 Coil winder collapsible

PDF-Sheet
Coil winder collapsible, cylindrical, not adjustable in width. For fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. As accessory also available eccentric clamp code 322.875, KE 41 for cable-Ø 1-40 mm.
 
CodeTypeC-winder to Coil winder dimension Cable Ø/m Cap. kg
322650 DTW 35KDTR 80 Ø 800/350, int. 200 10/600, 30/60 200 kg 35,00
11 Coil winder collapsible

PDF-Sheet
Coil winder collapsible, cylindrical, adjustable in width. For fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. As accessory also available eccentric clamp code 322.875, KE 41 for cable-Ø 1-40 mm.
 
• After winding procedure the ring will be served through the spokes.
• To take away the ring the coil winders flange will be folded down.
CodeTypeC-winder to Coil winder dimension Cable Ø/m Cap. kg
322654 DTW 80VKDTR 80 FH Ø 800/420, int. 90-200 10/600, 30/50 150 kg 40,00
322656 DTW 100VKDTR 100 FH Ø 1000/450, int. 100-250 10/1200, 30/130 200 kg 43,00
12 Cable loops

PDF-Sheet
Cable loops for fixing the cable head to the coil winder for winding procedure.
CodeTypeSuitable for Length Steel rope-D kg
322870 KS 300all coil winders 300 mm 2,0 mm 0,01
322871 KS 500all coil winders 500 mm 2,5 mm 0,02
13 Electronic cable traversing

PDF-Sheet
Electronic cable traversing for a.m. winding machines.
CodeTypeSuitable for For cable-D kg
322834 REL 26DDTR 80-100 3-40 mm 9,00
14 Moving equipment, hydr.

PDF-Sheet
Moving equipment for hydraulic lift of the winding machine and for displacement by electric motor drive.
CodeTypeSuitable for Suitable for Lifting Running kg
322974 HG 200HITMDTR 100 FH TR 250-256 Hydraulic Electro motor 65,00
Seitenende erreicht, zum Seitenanfang