1 | Cable roller bow
Cable roller bow mainly used in sea cable laying. Steel construction galvanized. Pulleys of high wattage Polyamide plastic with ball bearings also of stainless steel. Dimension: L/W/H 3500x400x2550 mm.

Kabelschachteinlaufrolle,Schachteinlaufrolle,Einlaufrolle, Rollenbogen,202849
CodeTypePulley-D Rad. Cable-D SWL kg
202849 SE 12-180200/100x160/146 1560 mm 125 mm 4800 kg 245,00
2 | Double tandem pulleys
Double tandem pulleys, steel construction galvanized. Four high wattage Polyamide pulleys with ball bearings. Mainly used in sea cable laying. The device adapt automatically to each pulling angle. The double rocker construction allows big bending radius. See pdf-drawing on the left.

Double tandem pulleys,510243
Double tandem pulleys,510340
CodeTypePulley-D Groove Rad. 45° SWL L/W/H mm kg
510243 LKT 205P200/100 125 mm 2000 mm 5000 kg 1800x250x800 182,00
510340 LKT 300P300/120 230 mm 2800 mm 5000 kg 2500x400x850 251,00
3 | Cable winding units stationary
Cable winding and unwinding stands, stationary or for mounting on lorries etc. For drums from 20-55 t. See accessories like drum drives, drum brakes etc. Techn. details see table below. Please ask for our more extensive offers.
Possible configurations:
Drum flange brakes, one or both sides, breaking force 12,5 resp. 25,0 kN at cable.
With an additional pre- and emergency brake braking forces up to 50,0 kN are possible.
Drive of the brakes per manual hydraulic pump or by electro-hydraulic drive
Drum drives one-side or double sides, pulling force 16,0 kN resp. 32,0 kN
Adjustable on the site to any drum width.
Cable-winding-stands,331736
Cable-winding-stands,331738
Cable-winding-stands,331740
Cable-winding-stands,331750
Cable-winding-stands,331752
CodeTypeCap. Drum-D Int. width kg
331736 KTU 20 ST20 t 2000-3700 any adjustable 1.870,00
331738 KTU 20 ST20 t 2800-4300 any adjustable 1.880,00
331740 KTU 25 ST25 t 3600-5100 any adjustable 1.945,00
331750 KTU 55 ST55 t 3600-5100 any adjustable 1.980,00
331752 KTU 55 ST55 t 4300-6000 any adjustable 1.980,00
4 | Drum shafts for KTU 20-55
Drum shafts for KTU 20-55. The height adjustable drum supports are equipped with ball bearing rollers in which the drum shafts turn easily. The stand can be adapted to any drum width. Drum shafts are available in length from 3000 to 5000 mm in partition of any 500 mm. The shaft must be of min. 1 m longer than the widest drum width. In standard it is equipped with 4 clamps for fixing the shaft and the drum. Centring bushes have to be ordered separately according to the drum shaft diameter and the bore diameter of the drums. See below.

Cable-winding-stands,031483334
Cable-winding-stands,031483344
Cable-winding-stands,031483354
Cable-winding-stands,031483364
Cable-winding-stands,031483374
Cable-winding-stands,031483384
Cable-winding-stands,031483424
Cable-winding-stands,031483454
Cable-winding-stands,031483464
Cable-winding-stands,031483466
Cable-winding-stands,031483476
Cable-winding-stands,031483478
CodeTypeD/L mm SWL Drum width kg
031483334 KSR 10122101/4000 16 t max. 3000 187,00
031483344 KSR 10825108/4000 20 t max. 3000 221,00
031483354 KSR 11417114/4000 20 t max. 3000 184,00
031483364 KSR 12120121/4000 24 t max. 3000 219,00
031483374 KSR 12714127/4000 22 t max. 3000 178,00
031483384 KSR 12725127/4000 30 t max. 3000 273,00
031483424 KSR 13917139/4000 31 t max. 3000 231,00
031483454 KSR 13930139/4000 38 t max. 3000 348,00
031483464 KSR 15925159/4000 54 t max. 3000 355,00
031483466 KSR 15925159/4500 54 t max. 3500 397,00
031483476 KSR 15930159/4500 59 t max. 3500 454,00
031483478 KSR 15930159/5000 59 t max. 4000 502,00
5 | Centring bushes for drum shafts D 101-159
Centring bushes for drum shafts to fit with the drum bore, see table below. Also available in other diameters. Bush length 80 mm

Cable-winding-stands,315765
Cable-winding-stands,315780
Cable-winding-stands,315815
Cable-winding-stands,315818
Cable-winding-stands,315850
Cable-winding-stands,315880
Cable-winding-stands,315920
Cable-winding-stands,315945
Cable-winding-stands,315952
Cable-winding-stands,315978
Cable-winding-stands,315987
Cable-winding-stands,315989
CodeTypeShaft-D Drum bore kg
315765 ZBS 101/125101 mm D 125 mm 10,00
315780 ZBS 101/140101 mm D 140 mm 12,00
315815 ZBS 108/145108 mm D 145 mm 15,00
315818 ZBS 108/200108 mm D 200 mm 9,00
315850 ZBS 114/150114 mm D 150 mm 15,00
315880 ZBS 114/200114 mm D 200 mm 15,00
315920 ZBS 121/200121 mm D 200 mm 15,00
315945 ZBS 127/150127 mm D 150 mm 4,00
315952 ZBS 127/200127 mm D 200 mm 12,00
315978 ZBS 139/200139 mm D 200 mm 12,00
315987 ZBS 159/185159 mm D 185 mm 16,00
315989 ZBS 159/200159 mm D 200 mm 18,00
6 | Drum brakes for KTU 20-55
Drum brakes for KTU 20-55, operated by hand pump or electro-hydraulic pump by separate hydraulic power pack. Per drum flange 1 brake shoe in front and behind. The drum can be braked on one or on both flanges. If high braking forces are required, e.g. at cable lowering in shafts etc. the pre- and emergency brake with independent hand pump should be installed. Electric power packs for one or two flange brakes have to be ordered separately.
Drum flange brake on one or both sides, 12,5 resp. 25,0 kN braking force on the cable.
Hydraulic by hand pump or by electro-motor-hydraulic.
Cable-winding-stands,331753
Cable-winding-stands,331754
Cable-winding-stands,331756
Cable-winding-stands,3317561
Cable-winding-stands,3317564
Cable-winding-stands,331757
Cable-winding-stands,331758
Cable-winding-stands,3317581
CodeTypeDrum-D Brake Braking force kg
331753 TRB 37012000-3700 one-side min. 12,5 kN 135,00
331754 TRB 43012800-4300 one-side min. 12,5 kN 135,00
331756 TRB 51013600-5100 one-side min. 12,5 kN 136,00
3317561 TRB 60014300-6000 one-side min. 12,5 kN 149,00
3317564 TRB 37022000-3700 both-sides min. 12,5 kN 250,00
331757 TRB 43022800-4300 both-sides min. 25,0 kN 270,00
331758 TRB 51023600-5100 both-sides min. 25,0 kN 270,00
3317581 TRB 60024300-6000 both-sides min. 25,0 kN 270,00
7 | Drum brake shoes for drum brakes to KTU 20-55
Drum brake shoes to KTU 20-55. Each brake shoe is suitable for a certain range of drum diameter, see table below. They can easily be replaced by bigger or smaller ones. They are equipped by high performance brake linings of a long service life and can simply be changed by screwing right on the field.

Cable-winding-stands,331798
Cable-winding-stands,331799
Cable-winding-stands,331800
Cable-winding-stands,331804
Cable-winding-stands,331808
Cable-winding-stands,331812
Cable-winding-stands,331816
Cable-winding-stands,331818
Cable-winding-stands,331820
CodeTypeDrum-D Radius kg
331798 TBS 24002000-2400 1100 17,00
331799 TBS 28002400-2800 1300 17,00
331800 TBS 32002800-3200 1500 17,00
331804 TBS 36003200-3600 1700 17,00
331808 TBS 41003600-4100 1920 17,00
331812 TBS 46004100-4600 2170 17,00
331816 TBS 51004600-5100 2420 17,00
331818 TBS 56005100-5600 2675 17,00
331820 TBS 61005600-6100 2920 17,00
8 | Drum pre-and emergency brake to KTU 20-55
Drum pre-and emergency brake to KTU 20-55, operated by an independent hand pump. The drum is braked from the bottom with two brake shoes on both flanges, when lowering cables in shafts etc. The brake shoes according to drum diameter have to be ordered separately.
Drum flange brakes on both sides, min. 25,0 kN braking force on the cable.
Hydraulic only by hand pump.
Cable-winding-stands,3317584
Cable-winding-stands,331759
Cable-winding-stands,331760
Cable-winding-stands,331761
CodeTypeDrum-D Brake Braking kg
3317584 TRV 37022000-3700 both-sides min. 25,0 kN 213,00
331759 TRV 43022800-4300 both-sides min. 25,0 kN 213,00
331760 TRV 51023600-5100 both-sides min. 25,0 kN 213,00
331761 TRV 60024300-6000 both-sides min. 25,0 kN 213,00
9 | Drum drives for KTU 20-55
Drum drives for KTU 20-55, for electro-hydraulic drives of separate hydraulic power packs. Per drum flange there are 1 tandem rubber drive rollers in front and 1 behind. With this drive the drum can be driven or braked with the same force, see table below. If high braking forces are required, e.g. at cable lowering in shafts etc. the pre- and emergency brake with independent hand pump should be installed. Electric power packs for one or two flange drives have to be ordered separately.
Drum drives, on one side or both sides, breaking force at the cable min. 8,0 resp. 16,0 kN
Accessory: hydraulic drive by electro-motor, continuous control.
The drive is able to brake, braking forces are equal to the drum drive forces.
Cable-winding-stands,331764
Cable-winding-stands,331765
Cable-winding-stands,331766
Cable-winding-stands,331768
Cable-winding-stands,331770
Cable-winding-stands,331772
Cable-winding-stands,331773
Cable-winding-stands,3317732
CodeTypeDrum-D Drive Below/top m/min. kg
331764 TAH 08022000-3700 one-side 16/8 kN 8/16 265,00
331765 TAH 16042000-3700 both-sides 32/16 kN 8/16 450,00
331766 TAH 08022800-4300 one-side 16/8 kN 8/16 260,00
331768 TAH 16042800-4300 both-sides 32/16 kN 8/16 530,00
331770 TAH 08023600-5100 one-side 16/8 kN 8/16 260,00
331772 TAH 16043600-5100 both-sides 32/16 kN 8/16 535,00
331773 TAH 08024300-6000 one-side 16/8 kN 8/16 260,00
3317732 TAH 16044300-6000 both-sides 32/16 kN 8/16 530,00
10 | Hand pump hydraulic for drum brakes
Hand pump hydraulic for drum brakes for KTU 20-55. The drum can be braked on one or on both flanges.

Cable-winding-stands,331776
Cable-winding-stands,331778
CodeTypeDrive Brake Below/top kg
331776 THH 4501Hand pump one-side 16/8 kN 29,00
331778 THH 4502Hand pump both-sides 32/16 kN 29,00
11 | Electro-hydraulic for drum brakes
Electro-hydraulic for drum brakes for KTU 20-55. The drum can be braked on one or on both flanges.

Cable-winding-stands,331782
Cable-winding-stands,331784
CodeTypeDrive Brake Below/top E-Motor kg
331782 TEH 4501El.-hydraulic one-side 16/8 kN 5,5 kW 65,00
331784 TEH 4502El.-hydraulic both-sides 32/16 kN 11,0 kW 62,00
12 | Electro-hydraulic for drum drives
Electro-hydraulic for drum drives for KTU 20-55. The drum can be driven on one or on both flanges.

Cable-winding-stands,331786
Cable-winding-stands,331788
CodeTypeDrive Drive Below/top E-Motor kg
331786 TTH 0802El.-hydraulic one-side 16/8 kN 5,5 kW 137,00
331788 TTH 1604El.-hydraulic both-sides 32/16 kN 11,0 kW 137,00
13 | Cable drum hydraulic jacks
Cable drum hydraulic jacks, with height adjustable central claw support for heaviest and biggest drums. Big triangular base. Steel construction hot galvanized.
 
Below mentioned capacity is per pair. Two are required
Base and top telescope tube adjustable to drum sizes.
Hydraulic lift by hand pump 150 mm
THV 20/30 accessory, shaft closing clamp, if jacks are on soft grounds or on lorries or boats
Drumjacks,jacks,312471
Drumjacks,jacks,312500
Drumjacks,jacks,312520
Drumjacks,jacks,312521
Drumjacks,jacks,312522
Drumjacks,jacks,312544
Drumjacks,jacks,312561
CodeTypeCap. Drum-D Triangle base kg
312471 THD 20/2540 t 1800-2500 1500/550 128,00
312500 THD 20/3740 t 2500-3700 1500/550 140,00
312520 THD 20/4240 t 3000-4200 1500/550 150,00
312521 THD 20/4440 t 3200-4400 1500/550 155,00
312522 THD 20/4640 t 3400-4600 1500/550 158,00
312544 THD 30/5050 t 3600-5000 2000x1000 271,00
312561 THV 20/30Closing clamp -- -- 2,30
14 | Tubular steel drum shafts, rotating
Tubular steel drum shafts, rotating with friction bearings, without clamps, for heavy drum weights and wider drums. Shaft length must be 500 mm longer than the drum width. Especially for application with the THD hydraulic jacks. The load capacities are corresponding to the widest possible drum, for reduced width the capacity decreases significantly. Static calculations are available.

Trommelachsen,Trommelwellen,,031481024
Trommelachsen,Trommelwellen,,031481032
Trommelachsen,Trommelwellen,,031481040
Trommelachsen,Trommelwellen,,031481044
Trommelachsen,Trommelwellen,,031481046
Trommelachsen,Trommelwellen,,031481228
Trommelachsen,Trommelwellen,,031481234
Trommelachsen,Trommelwellen,,031481240
Trommelachsen,Trommelwellen,,031481248
Trommelachsen,Trommelwellen,,031481252
Drum-shafts,031481428
Drum-shafts,031481432
Drum-shafts,031481440
Drum-shafts,031481448
Drum-shafts,031481456
Drum-shafts,031481832
Drum-shafts,031481844
Drum-shafts,031481852
Drum-shafts,031481856
Drum-shafts,031482044
Drum-shafts,031482052
Drum-shafts,031482064
Drum-shafts,031482068
Drum-shafts,031482072
Drum-shafts,031482651
Drum-shafts,031483256
Drum-shafts,031483260
Drum-shafts,031483270
CodeTypeD/L mm Seat SWL kg
031481024 KSDL 10122101/2400 D 96x115 to 15 t 110,00
031481032 KSDL 10122101/2600 D 96x115 to 15 t 119,00
031481040 KSDL 10122101/2800 D 96x115 to 15 t 127,00
031481044 KSDL 10122101/3000 D 96x115 to 15 t 136,00
031481046 KSDL 10122101/3200 D 96x115 to 15 t 145,00
031481228 KSDL 10825108/2400 D 96x115 to 25 t 135,00
031481234 KSDL 10825108/2600 D 96x115 to 25 t 145,00
031481240 KSDL 10825108/2800 D 96x115 to 25 t 155,00
031481248 KSDL 10825108/3000 D 96x115 to 25 t 166,00
031481252 KSDL 10825108/3200 D 96x115 to 25 t 176,00
031481428 KSDL 11417114/2500 D 96x115 to 24 t 119,00
031481432 KSDL 11417114/2800 D 96x115 to 24 t 130,00
031481440 KSDL 11417114/3000 D 96x115 to 24 t 140,00
031481448 KSDL 11417114/3200 D 96x115 to 24 t 148,00
031481456 KSDL 11417114/3300 D 96x115 to 24 t 152,00
031481832 KSDL 12714127/2800 D 116x115 to 28 t 150,00
031481844 KSDL 12714127/3000 D 116x115 to 28 t 158,00
031481852 KSDL 12714127/3200 D 116x115 to 28 t 166,00
031481856 KSDL 12714127/3300 D 116x115 to 28 t 170,00
031482044 KSDL 12725127/2800 D 116x115 to 38 t 194,00
031482052 KSDL 12725127/3000 D 116x115 to 38 t 206,00
031482064 KSDL 12725127/3200 D 116x115 to 38 t 219,00
031482068 KSDL 12725127/3600 D 116x115 to 38 t 244,00
031482072 KSDL 12725127/4020 D 116x115 to 38 t 270,00
031482651 KSDL 13925139/3200 D 116x115 to 48 t 241,00
031483256 KSDL 15930159/3200 D 116x115 to 55 t 315,00
031483260 KSDL 15930159/3500 D 116x115 to 55 t 344,00
031483270 KSDL 15930159/4900 D 116x115 to 55 t 487,00
15 | Tubular steel drum shafts, for disc brake
Tubular steel drum shafts, rotating with friction bearings, without clamps, for heavy drum weights and wider drums. Shaft length must be 500 mm longer than the drum width. The load capacities are corresponding to the widest possible drum, for reduced width the capacity decreases significantly. Especially for application with the THD hydraulic jacks. On one or both ends there is an adapter for one or two disc brakes STBT 400. Static calculations are available.
Shaft length must be 500 mm longer than biggest drum width.
The capacities are corresponding to the widest possible drum, for reduced widths the Cap. decreases significantly.
Any other length or dimension available.
Static drum shaft calculation available on request..
Drum-shafts,031481642
Drum-shafts,031481836
Drum-shafts,031482649
CodeTypeD/L mm Seat SWL Braking kg
031481642 KSDK 12120121/2800 D 96x115 to 28 t 3200 Nm 154,00
031481836 KSDK 12714127/2800 D 116x115 to 28 t 3200 Nm 152,00
031482649 KSDK 13925139/3000 D 116x115 to 48 t 3200 Nm 230,00
16 | Cable drum disc brake
Cable drum disc brake without drum fork, to order separately, for controlled unwinding of cable or line drums from the hydraulic drum jacks THD 20/25 - 30/50. Suitable for all a.m. cable drum shafts. One complete set as shown left consists of:
1 steel shaft type KSDK, see above, to select acc. to capacity and width of the drum
1 disc brake STBT 400
1 drum fork suitable in diameter to the drum shaft, see below
2 clamps fitting the drum shaft see below
2 Centric cones fitting the drum shaft and the drum bore diameter, see below
Drumbrake,350862
CodeTypeOperation Braking At the cable kg
350862 STBT 400mechanic 3200 Nm approx. 4,0 kN 37,00
17 | Drum fork
Drum fork suitable for a.m. drum disc brake together with the tubular steel drum shafts.

Drum fork,033370118
Drum fork,033370122
Drum fork,033370123
CodeTypeShaft-D kg
033370118 TM 09595 mm 8,00
033370122 TMG 121121 mm 13,00
033370123 TMG 127127 mm 13,00
18 | Clamps for drum shafts D 101-159 mm
Clamp for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. Steel coated. Width 50 mm.

Klemmschellen,Trommelschellen,315340
Klemmschellen,Trommelschellen,315350
Clamps drum shafts,315360
Klemmschellen,Trommelschellen,315370
Clamps drum shafts,315380
Clamps drum shafts,315384
Clamps drum shafts,315385
Clamps drum shafts,315390
CodeTypeShaft-D kg
315340 KLS 101101-105 mm 2,00
315350 KLS 108108-110 mm 2,40
315360 KLS 114114-115 mm 3,00
315370 KLS 121121-123 mm 5,00
315380 KLS 127127-130 mm 3,40
315384 KLS 135135-137 mm 4,00
315385 KLS 139139-140 mm 3,60
315390 KLS 159159-160 mm 3,90
19 | Centring bushes for drum shafts D 101-159
Centring bushes for drum shafts to fit with the drum bore, see table below. Also available in other diameters. Bush length 80 mm

Cable-winding-stands,315765
Cable-winding-stands,315780
Cable-winding-stands,315815
Cable-winding-stands,315818
Zentrierbuchsen,Stufenbuchsen,Stufenbuchse,315850
Zentrierbuchsen,Stufenbuchsen,Stufenbuchse,315880
Centring-piece,315940
Centring-piece,315952
Centring-piece,315978
Centring-piece,315987
Centring-piece,315989
CodeTypeShaft-D Drum bore kg
315765 ZBS 101/125101 mm D 125 mm 10,00
315780 ZBS 101/140101 mm D 140 mm 12,00
315815 ZBS 108/145108 mm D 145 mm 15,00
315818 ZBS 108/200108 mm D 200 mm 9,00
315850 ZBS 114/150114 mm D 150 mm 15,00
315880 ZBS 114/200114 mm D 200 mm 15,00
315940 ZBS 127/140127 mm D 140 mm 4,00
315952 ZBS 127/200127 mm D 200 mm 12,00
315978 ZBS 139/200139 mm D 200 mm 12,00
315987 ZBS 159/185159 mm D 185 mm 16,00
315989 ZBS 159/200159 mm D 200 mm 18,00