This conduit rod pushing unit is used for introducing conduit rods through empty or occupied ducts. The strong hydraulic driven cable feeder is able to force a high push with its long steel chains equipped with neoprene profiles. The special strong rod of 15 mm in selectable in length between 300 to 400 m, guarantees a very high pushing stability. The reel for the rod is included in the pushing unit, but the rod itself has to be ordered by the wished length. If blockages or damages are suspected in the ducts the use of a red detectable rod with copper conductors is recommendable. This enable the duct line to be followed by a detector and to find the blockades, see table below.
Version 1: the single units are fix mounted on the selected trailer either with canvas cover or with hard body box.
Trailer with canvas cover (flat bed trailer). Aluminium platform gate, to rise on the right side and on the rear by pneumatic springs. These protect personnel from weather and humidity.
Trailer with hard body box (flat bed trailer). Box made 17 mm thick Plywood, inside and outside coated by white GFK. To rise on the right side and on the rear by pneumatic springs. These protect personnel from weather and humidity. Mounting the pushing unit as above mentioned.
Both trailer are equipped with a straight drawing bar with overrun brake and a ball coupling and two rear outriggers. Each mounted device can be dismounted from the trailer and be used individual for any other work.
Version 2: pushing unit completely mounted on a base frame which can work independent stationary or be pulled into the trailer to work as a mobile device, see categories below.
• Trailer, canvas cover L/W/H: 3950/1830/2300, straight drawing bar, overrun brake, coupling height 450 mm
• Trailer, hard body box L/W/H: 2950/2080/2420, V-shaped drawing bar, overrun brake, coupling height 450 mm