1 | Cable trailer hydraulic loading, 80 km/h
Cable trailer hydraulic loading for lorry transport up to 80 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. Rigid tubular steel shaft D 76 mm. Rotating as accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below.
 
Payload without accessories. If accessories are mounted like hydr. drum drives etc. the payload reduces according to their weights.
With air brakes for speed up to 80 km/h. ABS as accessory.
Through stub axles the trailer is open to the rear for receiving the cable drum.
Big ground clearance through long lift hydraulic jacks.
Type KVH 7,0/80 available with bigger internal/external width of 1900/2750 mm, see table.
According to guide line 70/221 EWG these trailers have to be equipped with rear side protection gates
Special painting as accessory, Code 350.980, KSL
Cable-drum-trailer,342342
Cable-drum-trailer,342584
Cable-drum-trailer,342644
Cable-drum-trailer,342648
CodeTypePayload Total Drum-D Hitch Int-/Extern kg
342342 KVH 3,5/803500 kg 4600 kg 1600-3000 290 kg 1720/2500 1.000,00
342584 KVH 5,3/805300 kg 6700 kg 1800-3200 700 kg 1700/2550 1.300,00
342644 KVH 7,0/807000 kg 8500 kg 2000-3200 700 kg 1700/2550 1.600,00
342648 KVH 7,0/807000 kg 8500 kg 2000-3200 700 kg 1900/2750 1.810,00
2 | Cable trailer hydraulic loading, 25 km/h
Cable trailer hydraulic loading for lorry transport up to 25 km/h. Drums are vertically lifted for transport by two hydraulic jacks operated by central hand pump or by motorized hydraulic which can also drive the drum, as an accessory. Rigid tubular steel shaft D 76 mm. Rotating as accessory. If smaller drums than mentioned below have to be transported or winded, please select as accessory one of the below shown small drum suspension KVZ 180 or drum support TAV 080. Further accessory see below. Techn. details see below.
 
Payload without accessories. If accessories are mounted like hydr. drum drives etc. the payload reduces according to their weights.
Types ../25A with overrun brake, types ../25D with air brake for speed of 25 km/h
Through stub axles the trailer is open to the rear for receiving the cable drum.
Big ground clearance through long lift hydraulic jacks.
Types KVH 7,4/25 and 9,4/25 available with bigger internal/external width of 1860/2750 mm.
According to guide line 70/221 EWG these trailers have to be equipped with rear protection gates
Special painting as accessory, Code 350.980, KSL
Cable-drum-trailer,342442
Cable-drum-trailer,342482
Cable-drum-trailer,342744
Cable-drum-trailer,342844
CodeTypePayload Total Drum-D Hitch Int-/Extern kg
342442 KVH 4,6/25A4600 kg 5600 kg 1400-3000 250 kg 1720/2500 850,00
342482 KVH 4,6/25D4600 kg 5600 kg 1400-3000 250 kg 1720/2500 850,00
342744 KVH 7,4/25D7400 kg 8700 kg 1800-3200 700 kg 1700/2550 1.200,00
342844 KVH 9,0/25D9000 kg 10600kg 1800-3200 700 kg 1700/2550 1.300,00
3 | ABS brake system
Surcharge for Anti-Block-System (ABS) for twin line airbrake. EC-Obligation for all trailers from 3,5 t total weight and speed from 80 km/h.

Cable-drum-trailer,349730
CodeTypeSuitable for kg
349730 ABS 37all KVS/KVH 3,5-7,0/80 14,17
4 | Rear protection gate
Rear protection gate, hinged, for Cable trailers KVH 3.5-9,0
 
The need of a rear protection is subject to national regulations. Independent of this, the rear protection offers a higher safety in the road traffic.
Cable-drum-trailer,349840
Cable-drum-trailer,349844
Cable-drum-trailer,349848
Cable-drum-trailer,349852
CodeTypeSuitable for Trailer ext. width kg
349840 KUF 350KVH 3.5 2500 mm 41,85
349844 KUF 460KVH 4.6 2500 mm 41,85
349848 KUF 530KVH 5.3/7.0/7.4/9.0 2550 mm 41,85
349852 KUF 537KVH 7.0/9.0/2750 2750 mm 51,85
5 | Side protection gate
Side protection gate fixed, for Cable trailers KVH 3.5-9.0
 
Side protection gates are essential to protect pedestrian and cyclists for running over by the trailer. These protections are necessary for the following trailers:
of a total weights more than 3,5 t.
of maximum speed more than 25 km/h
Cable-drum-trailer,349900
Cable-drum-trailer,349904
Cable-drum-trailer,349912
CodeTypeSuitable for Trailer ext. width kg
349900 SUF 314KVH 3.5/80 all 46,00
349904 SUF 537KVH 5.3/80 all 46,00
349912 SUF 709KVH 7.0/80 all 46,00
6 | Position lights
Position lights 24 volt, in front of the trailers KVS/H 3,5-9,0, according to the law of some countries

Ballcoupling,349560
CodeTypeSuitable for kg
349560 KPL 24KVS/H 3,5-9,0 3,00
7 | Small drum suspension
Small drum suspension for drums below D 1800-800 mm for all KVH-types, but not for driving these drums by hydraulic drum drives.

For hydraulic drive of such small drums of diam. 800-1800 mm, see next table, drum support 350955 TAV 080, can also be retrofitted.
Cable-drum-trailer,350942
Cable-drum-trailer,350944
CodeTypeSuitable for Drum-D Trailer width Shaft-D kg
350942 KVZ 180KVH 3,5-9.0 800-1800 mm 2550 mm 76 mm 68,00
350944 KVZ 180KVH 3,5-9.0 800-1800 mm 2750 mm 76 mm 68,00
8 | Drum support
Additional support in front of the trailer for winding and unwinding drums smaller than D 1800-800 mm by the hydraulic drum drives on KVH-trailers. One set exists of one right-hand and one left-hand support. For loading these drums a lifting equipment is necessary.
 
Non additional drum shaft is necessary, the standard shaft of the trailer can be used.
,350955
CodeTypeSuitable for Drum-D Trailer width kg
350955 TAV 080KVH 2.6-9,0 800-1800 mm unlimited 17,00
9 | Rotating steel drum shafts
Surcharge for rotating drum shafts. All a.m. trailers are fitted with rigid tubular steel drum shafts. With rotating shafts cable drums unwind much easier, they are necessary if the trailer is equipped with a drum drive or a drum disc brake.
The cones are with stages for all drum holes from diam. 80-140 mm.
If no drum disc brake is necessary the use of below mentioned light alu drum shaft is recommended.
Trommelachsen,Trommelwellen,350790
Trommelachsen,Trommelwellen,350792
Trommelachsen,Trommelwellen,350795
Trommelachsen,Trommelwellen,350797
CodeTypeSuitable for D/length kg
350790 APR 690KVH 2.6-4.6/FZB 2550 76/10/1888 mm 44,00
350792 APR 692KVH 5.3-7.4/FZB 2550 76/20/1888 mm 63,00
350795 APR 694KVH 7.0-9.0/FZB 2550 76/20/1838 mm 62,00
350797 APR 696KVH 7.0-9.0/FZB 2750 76/20/2038 mm 65,00
10 | Rotating alu drum shafts
Surcharge for rotating drum shafts. All a.m. trailers are fitted with rigid tubular steel drum shafts. With rotating shafts cable drums unwind much easier, they are necessary if the trailer is equipped with a drum drive or a drum disc brake.

Trommelachsen,Trommelwellen,35079075
CodeTypeSuitable for D/length kg
35079075 APR 755KVH 2.6-5.3/FZB 2550 75/1888 mm 34,00
11 | Drum drives standard
Cable drum drive both sides, with engine on the trailer for all cable trailers KVH 3,5-9,0.
Hydraulic drive by hydraulic engines on the trailer
Pulling force on cable depending on drum diameter up to approx. 5,0 kN.
Wind- and unwinding speed approx. 0-50 m/min.
TBL + TDL 502 as retrofitting part, for mounting on customers equipment, see pdf-drawing.
Type TDHE 502 diesel engine with electro starter.
Drum-jack-drive,drum-drive,351554
Drum-jack-drive,drum-drive,351559
Drum-jack-drive,drum-drive,351584
Drum-jack-drive,drum-drive,351654
Drum-jack-drive,drum-drive,351659
Drum-jack-drive,drum-drive,351684
Drum-jack-drive,drum-drive,351685
CodeTypeDrive of Engine kW kg
351554 TB 502Drum without jack lift Petrol 9.6 217,00
351559 TBL 502Lose, drum without lift Petrol 9.6 215,00
351584 TBH 502Drum with jack lift Petrol 9.6 220,00
351654 TD 502Drum without jack lift Diesel 6.8 240,00
351659 TDL 502Lose, drum without lift Diesel 6.8 238,00
351684 TDH 502Drum with jack lift Diesel 6.8 244,00
351685 TDHE 502Drum with jack lift Diesel 6.8 270,00
12 | Drum drive with radio control
Cable drum drive and drum lifting, diesel engine with electric starter and hydraulic power pack on the trailer. Incl. radio control for all cable trailers KVH 3.5-9.0.
 
Radio control consisting of light mobile transmitter and receiver on the trailer. Control command of drum loading individual left or right, and drive of the drum for winding or unwinding.
Hydraulic drive by Hatz diesel engine with electric starter on the trailer.
Pulling force on cable depending on drum diameter up to approx. 5,0 kN.
Wind- and unwinding speed approx. 0-50 m/min.
Radio control for drum lifting/lowering individual left/right, winding and unwinding.
Drum-jack-drive,drum-drive,351688
CodeTypeDrive of Engine kW kg
351688 TDHF 510Drum and lifting winches Diesel 6.8 289,00
13 | Drum drives for external hydraulic
Cable drum drive for external hydraulic connection of the towing vehicle. For all cable trailers KVH 3,5-9,0.
Hydraulic drive supplied by the towing vehicle
Pulling force on cable depending on drum diameter up to approx. 5,0 kN.
Wind- and unwinding speed approx. 0-50 m/min.
Type TZL 502 available as retrofitting part, for mounting on customers equipments, see pdf-drawing on the left.
Drum-jack-drive,drum-drive,351452
Drum-jack-drive,drum-drive,351459
Drum-jack-drive,drum-drive,351484
CodeTypeDrive of Drive through kg
351452 TZ 502Drum without lift Towing vehicle 166,00
351459 TZL 502Lose, drum without lift Towing vehicle 166,00
351484 TZH 502Drum with jack lift Towing vehicle 150,00
14 | Cable drum disc brake
Cable drum disc brake with drum fork for controlled unwinding of cable or line drums. Hand mechanical setting of the braking force. To use it with KVH-types code 350.790 APR 690 is necessary.

Drumbrake,350860
CodeTypeOperation Braking At the cable kg
350860 STB 400mechanic 3200 Nm approx. 4,0 kN 46,00