1 | Cable uncoiler
Cable uncoiler steel galvanized, with ball-bearings, with 4 adjustable spindles. Used for installation works. For rings of D 100-700 mm. accessory: cable length measuring devices, see table below.

Cable-coiler,uncoiler,winder,unwinder,320120
Cable-coiler,uncoiler,winder,unwinder,320140
,320160
CodeTypeRing-D Dimension SWL kg
320120 KA 600100-500 D 600/440 40 kg 7,00
320140 KA 700250-600 D 700/440 60 kg 15,50
320160 KA 800250-700 D 800/440 60 kg 18,00
2 | Cable length meters
Cable and line length meter for KA 700-800, counter up to 999,99,99 m, accuracy ± 0,8 %.

Cable length meters,320240
,320245
,320250
,320255
CodeTypeSuitable for C-D St-rope kg
320240 KL 21KA 700-800 3-21 no 3,40
320245 KL 21SKA 700-800 3-21 3-12 3,50
320250 KL 50KA 700-800 3-50 no 4,20
320255 KL 50SKA 700-800 3-50 3-22 4,20
3 | Cable unwinder
Cable unwinder for small drums, even with damaged flanged wheels for electric installation works. Tubular steel construction galvanized. Consisting of: basic frame with 2 rubber coated wheels, one drum shaft D 25 mm with 2 cones of polyamide for hole diameter 25-80 mm.
Collapsible for easy transportation to the site.
Easy movable with the drum through big rubber coated wheels.
For drum-D to 800 and drum widths to 530, drum weight max. 200 kg
As accessory steel tube drum shaft D 50, ball bearings, 2 clamps, for cones see table below.
,320290
,320292
,315504
,3155045
CodeTypeEquipment Shaft Cones for kg
320290 KTA 8Winder as above D 25 Hole D 25-80 11,60
320292 KTA 8WSteel tube shaft D 50 See next line 2,05
315504 ZKP 50-80Polyam. cones D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Polyam. cones D 50 Hole-D 50-108 0,39
4 | Cable drum tipping stand
Cable drum tipping stands. Simple drum unwinding equipment at installation works. Excellent tipping leverage due to optimum positioning of centre of gravity. Capable of lifting heavy loads. Tubular steel construction galvanized.

,320300
,320320
,320330
CodeTypeDrum-D Shaft Max. Int. width Ext. width kg
320300 KW 6-8600-800 D 48 300 kg 600 880 13,00
320320 KW 6-10600-1000 D 48 500 kg 700 985 22,00
320330 KW 6-12600-1250 D 48 800 kg 930 1250 38,00
5 | Stepped bushes
Stepped bushes of polyamide for shaft-D 48, one step D 80, for drum tipping stands KW 6-12.

,315503
CodeTypeFor shaft For drum bore kg
315503 ZBP 48D 48 D 80 0,37
6 | Drum unwinding stand for FOC
Drum unwinding stand for FOC or subduct drums, galvanized. Equipped with a lightweight aluminium shaft D 75 mm with drum shaft securing and 2 clamps.
Sturdy steel construction, hot galvanized, easy dismountable by hand for transportation.
Two crank spindles to lift the stand for unwind cables in any position.
High stability under load even in uneven places.
For drum-D to 1400, and drum width to 900, drum weight max. 500 kg.
As accessory alu-drum shaft D 50, ball bearings, order clamps and cones separately, see table below.
Dimensions mounted: L/W/H 1450/1400/689.
,344355
,350592
,315030
,315504
,3155045
CodeTypeEquipment Shaft Cones for kg
344355 TRG 1140Winder as above D 75 --- 96,00
350592 TAK 5013Alu drum shaft D 50 --- 7,40
315030 KSV 51Shaft clamps D 50 --- 1,30
315504 ZKP 50-80Polyam. cones D 50 Hole-D 50-80 0,15
3155045 ZKP 50-108Polyam. cones D 50 Hole-D 50-108 0,39
7 | Drum wind off roller
Cable drum wind-off roller for cables or ropes. Steel construction, powder coated. Steel rollers galvanized with ball bearings.
Rollers adjustable for smaller spools down to Ø 100
Rubber feet for stable and quiet running
,320660
CodeTypeFor drum-D Drum width SWL L/W/H mm kg
320660 KTA 7100-1200 max. 500 150 kg 530/550/110 8,80
8 | Drum wind off roller
Cable drum wind-off roller, alu chassis with adjustable alu-rollers with ball bearings. Two required. Techn. Details see table below.

Drum-wind-off-roller,320710
CodeTypeSupport Wooden drum-D Steel drum-D kg
320710 KTA 2AAlu 400-1000/kg 500 400-1600/kg 1000 8,20