1 | Loading traverses
Loading traverse for safe lifting and transporting of cable drums. With chain suspension and 2 adjustable steel rope suspensions, suitable for drums acc. table below. Further dimensions are available on short call.
Expanding construction advantages:
Telescoping small dimensions for stocking, lightweight.
Steel profile construction galvanized, complete with rope suspension, without quick-lifting hooks.
Drum-loading-traverses,317320
Drum-loading-traverses,317322
Drum-loading-traverses,317326
Drum-loading-traverses,317330
Drum-loading-traverses,317334
Drum-loading-traverses,317338
Drum-loading-traverses,317342
Drum-loading-traverses,317346
CodeTypeCap. Drum width Drum-D L max. L min. kg
317320 KLT 313 t 1200-1800 3000 2000 1200 35,00
317322 KLT 515 t 1200-1800 3000 2000 1250 56,00
317326 KLT 818 t 1200-1800 3000 2000 1280 84,00
317330 KLT 10110 t 1200-1800 3500 2000 1280 93,00
317334 KLT 12112 t 1700-2500 4000 2700 1730 148,00
317338 KLT 15115 t 1700-2500 4500 2700 1730 161,00
317342 KLT 18118 t 1750-2750 4500 2950 1900 250,00
317346 KLT 21121 t 1750-2750 4500 2950 1900 260,00
2 | Drum quick lift hooks
Cable drum quick-lift hooks for safe lifting and transporting cable drums if there is no space to insert a long drum shaft. Not suitable to unwind cable drums. Made of steel galvanized.

Below mentioned capacity is per pair. Two are required
Drum-lift-hooks,317370
Drum-lift-hooks,317400
Drum-lift-hooks,317410
CodeTypeCap. For hole-D Tube-D/L kg
317370 KTH 306 t 80-125 mm 76/250 mm 6,40
317400 KTH 5010 t 90-140 mm 89/295 mm 12,40
317410 KTH 8016 t 125-140 mm 121/400 mm 19,70
3 | Tubular steel drum shafts, rotating
Cable drum shafts rotating, tubular steel with bearings and recessed ends and 2 clamps

Drum-shafts,314770
Drum-shafts,314810
Drum-shafts,314850
Drum-shafts,314890
CodeTypeD/L mm Bearing seat SWL kg
314770 KSD 761076/1850 D 66x115 mm to 6,6 t 41,60
314810 KSD 761476/2000 D 66x115 mm to 7,0 t 53,20
314850 KSD 891789/2200 D 80x115 mm to 13,0 t 80,00
314890 KSD 951795/2200 D 80x115 mm to 15,0 t 85,40
4 | Tubular steel drum shafts, rotating
Tubular steel drum shafts, rotating with friction bearings, without clamps, for heavy drum weights and wider drums. Shaft length must be 500 mm longer than the drum width. Especially for application with the THD hydraulic jacks. The load capacities are corresponding to the widest possible drum, for reduced width the capacity decreases significantly. Static calculations are available.

Trommelachsen,Trommelwellen,,031481024
Trommelachsen,Trommelwellen,,031481032
Trommelachsen,Trommelwellen,,031481040
Trommelachsen,Trommelwellen,,031481044
Trommelachsen,Trommelwellen,,031481046
Trommelachsen,Trommelwellen,,031481228
Trommelachsen,Trommelwellen,,031481234
Trommelachsen,Trommelwellen,,031481240
Trommelachsen,Trommelwellen,,031481248
Trommelachsen,Trommelwellen,,031481252
Drum-shafts,031481428
Drum-shafts,031481432
Drum-shafts,031481440
Drum-shafts,031481448
Drum-shafts,031481456
CodeTypeD/L mm Seat SWL kg
031481024 KSDL 10122101/2400 D 96x115 to 15 t 110,00
031481032 KSDL 10122101/2600 D 96x115 to 15 t 119,00
031481040 KSDL 10122101/2800 D 96x115 to 15 t 127,00
031481044 KSDL 10122101/3000 D 96x115 to 15 t 136,00
031481046 KSDL 10122101/3200 D 96x115 to 15 t 145,00
031481228 KSDL 10825108/2400 D 96x115 to 25 t 135,00
031481234 KSDL 10825108/2600 D 96x115 to 25 t 145,00
031481240 KSDL 10825108/2800 D 96x115 to 25 t 155,00
031481248 KSDL 10825108/3000 D 96x115 to 25 t 166,00
031481252 KSDL 10825108/3200 D 96x115 to 25 t 176,00
031481428 KSDL 11417114/2500 D 96x115 to 24 t 119,00
031481432 KSDL 11417114/2800 D 96x115 to 24 t 130,00
031481440 KSDL 11417114/3000 D 96x115 to 24 t 140,00
031481448 KSDL 11417114/3200 D 96x115 to 24 t 148,00
031481456 KSDL 11417114/3300 D 96x115 to 24 t 152,00
5 | Drum shaft suspension
Suspension with shackle only for rotating drum shafts for lifting and unwinding cable drums, without cones.

Below mentioned capacity is per pair. Two are required
Drum-shaft-suspension,315400
Drum-shaft-suspension,315403
Drum-shaft-suspension,315406
CodeTypeShaft-D Clamping-D SWL kg
315400 WAH 7675-76 mm 67 mm 6 t 5,20
315403 WAH 9089-101 mm 81 mm 15 t 9,10
315406 WAH 108108-127 mm 98 mm 28 t 25,00
6 | Centring bushes for drum shafts D 101-159
Centring bushes for drum shafts to fit with the drum bore, see table below. Also available in other diameters. Bush length 80 mm

Cable-winding-stands,315765
Cable-winding-stands,315780
Cable-winding-stands,315815
Cable-winding-stands,315818
Cable-winding-stands,315850
Cable-winding-stands,315880
CodeTypeShaft-D Drum bore kg
315765 ZBS 101/125101 mm D 125 mm 10,00
315780 ZBS 101/140101 mm D 140 mm 12,00
315815 ZBS 108/145108 mm D 145 mm 15,00
315818 ZBS 108/200108 mm D 200 mm 9,00
315850 ZBS 114/150114 mm D 150 mm 15,00
315880 ZBS 114/200114 mm D 200 mm 15,00
7 | Clamps for drum shafts D 101-159 mm
Clamp for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. Steel coated. Width 50 mm.

Klemmschellen,Trommelschellen,315340
Klemmschellen,Trommelschellen,315350
Clamps drum shafts,315360
CodeTypeShaft-D kg
315340 KLS 101101-105 mm 2,00
315350 KLS 108108-110 mm 2,40
315360 KLS 114114-115 mm 3,00
8 | Cable drum lifting shoe
Cable drum lifting shoe. For horizontal lifting of cable drums through one drum centre hole. Chain with swivel and shoe. Total length approx. 1 m.

Cable drum lifting shoe,317600
Cable drum lifting shoe,317605
CodeTypeCap. For hole-D kg
317600 KTK 131300 kg 70-90 mm 4,70
317605 KTK 282800 kg 100-130 mm 6,50
9 | Rotating drum lifter
Rotating drum lifting unit. For horizontal lifting cable drums through one drum centre hole. Rotating with ball bearings for unwinding cables. When lifting the drum, the gripping arms are folded outwards.

Drum lifter,317620
Drum lifter,317625
CodeTypeCap. For hole-D kg
317620 KTS 121200 kg 75-80 mm 4,44
317625 KTS 222200 kg 100-110 mm 8,00