1 | Conduit plugs divided
Conduit plug divided with lateral rope passage. Included 1 slotted sleeve and tools. With these plugs ropes from D 4 can be blown. It is also possible to blow bigger ropes up to D 9 mm directly through the ducts, but only from capstan winches which allows to pay out the ropes stress less.

An air pressure of approx. 0,5-1,5 bar must not be exceeded. The bigger the duct the lower has to be the pressure.
Conduit-plugs,234295
Conduit-plugs,234297
Conduit-plugs,234312
Conduit-plugs,234315
Conduit-plugs,234325
Conduit-plugs,234330
Conduit-plugs,234372
Conduit-plugs,234385
Conduit-plugs,234395
Conduit-plugs,234402
Conduit-plugs,234405
Conduit-plugs,234422
Conduit-plugs,234432
Conduit-plugs,234445
Conduit-plugs,234462
Conduit-plugs,234485
Conduit-plugs,234489
Conduit-plugs,234490
Conduit-plugs,234491
Kanalrohrstopfen,Rohrverschluß,Rohrstopfen,2344912
CodeTypeDuct-ID Pressure pipe Coupling kg
234295 KRS 5050-55 1/4" 1/2" 1,50
234297 KRS 5454-61 1/4" 1/2" 1,50
234312 KRS 6161-69 1/4" 1/2" 1,65
234315 KRS 7070-80 3/8" 1/2" 2,60
234325 KRS 7676-85 3/8" 1/2" 2,70
234330 KRS 8686-95 1/2" 1/2" 3,10
234372 KRS 9696-103 3/4" 3/4" 4,90
234385 KRS 103103-112 3/4" 3/4" 4,90
234395 KRS 113113-120 3/4" 3/4" 5,30
234402 KRS 118118-128 3/4" 3/4" 5,30
234405 KRS 128128-136 3/4" 3/4" 6,10
234422 KRS 135135-147 3/4" 3/4" 6,30
234432 KRS 146146-159 3/4" 3/4" 7,00
234445 KRS 160158-172 1" 3/4" 9,50
234462 KRS 173173-184 1" 3/4" 9,80
234485 KRS 198199-208 1" 3/4" 11,10
234489 KRS 220220-225 1" 3/4" 12,30
234490 KRS 240230-240 1" 3/4" 13,00
234491 KRS 250240-250 1" 3/4" 13,50
2344912 Biggerdiam. not possible --- 0,00
2 | Slotted sleeves
Slotted sleeve, accessory to KRS-plugs for blowing-in different rope diameters.

Slotted sleeves,234492
Slotted sleeves,234493
Slotted sleeves,234494
Slotted sleeves,234495
Slotted sleeves,234496
Slotted sleeves,234497
CodeTypeRope-D kg
234492 SBU 044 mm 0,15
234493 SBU 055 mm 0,14
234494 SBU 066 mm 0,13
234495 SBU 077 mm 0,12
234496 SBU 088 mm 0,11
234497 SBU 099 mm 0,10
3 | Air-regulator valve
Air-regulator valve for blowing-in of pilot ropes and winch ropes. Equipped with one screw coupling and one standard quick coupling. This regulator valve must not be served in the shaft, but only outside. It is to be connected between two hoses.

Regulator valve,234080
CodeTypeSize kg
234080 REV 341/2-3/4" 0,82
4 | Ball pistons
Ball piston for blowing-in rope winches and simultaneously lubricating the ducts. Ball pistons go easier through the ducts they adapt better to the different duct shapes. Distances can be very long, the air pressures are low approx. 0,5-1,5 bar max.

Ballpistons,234562
Ballpistons,234567
Ballpistons,234572
Ballpistons,234602
Ballpistons,234612
Ballpistons,234632
Ballpistons,234692
Ballpistons,234712
Ballpistons,234722
Ballpistons,234726
Ballpistons,234732
Ballpistons,234734
Ballpistons,234738
Ballpistons,234742
CodeTypeDuct-ID kg
234562 BKO 5040-50 mm 0,20
234567 BKO 6050-60 mm 0,24
234572 BKO 7060-70 mm 0,26
234602 BKO 8070-80 mm 0,30
234612 BKO 9080-90 mm 0,35
234632 BKO 11090-110 mm 0,52
234692 BKO 125110-125 mm 0,55
234712 BKO 150130-150 mm 0,72
234722 BKO 160150-160 mm 0,95
234726 BKO 190170-190 mm 1,35
234732 BKO 210190-210 mm 1,60
234734 BKO 225200-225 mm 2,40
234738 BKO 250230-250 mm 3,20
234742 Biggerdiameters not possible! 0,00
5 | Conduit plugs divided
Conduit plug divided, with coupling, for blowing-in ropes of D 4 mm in ducts.

Conduit-plugs,234240
Conduit-plugs,234250
Conduit-plugs,234260
CodeTypeDuct-ID kg
234240 KRG 2827-28 1,00
234250 KRG 3534-35 1,05
234260 KRG 4040-41 1,23
6 | Pistons
Pistons with cup rings for blowing ropes in connection with divided plugs KRG 28-40.

Pistons,234510
Pistons,234530
Pistons,234550
CodeTypeDuct-ID kg
234510 MKO 2827-28 mm 0,13
234530 MKO 3534-35 mm 0,13
234550 MKO 4040-41 mm 0,14
7 | accessory to pilot winches
Polyester ropes for blowing through ducts, spools of 500 or 1000 m. kN = Minimum Breaking Load

Polyester ropes,23297005
Polyester ropes,23297010
Polyester ropes,23298005
Polyester ropes,23298010
Polyester ropes,23299005
CodeTypeRope-D Spool kN kg
23297005 KSP 04-404 mm 500 m 2,8 4,70
23297010 KSP 04-404 mm 1000 m 2,8 10,22
23298005 KSP 05-405 mm 500 m 4,5 7,80
23298010 KSP 05-405 mm 1000 m 4,5 14,52
23299005 KSP 06-406 mm 500 m 6,4 18,00
8 | Duct lubricator
Duct lubricator and cleaner of two balls for passing narrow duct bows. After pulling through these lubricators there is an equal lubrication of the duct wall on the complete length, which reduces the pulling forces up to 80 %.

Duct lubricator, duct cleaner,234820
Duct lubricator, duct cleaner,234828
CodeTypeDuct-ID Length Connection kg
234820 RSB 50/240-50 130 mm Clipper 0,56
234828 RSB 75/260-70 150 mm Clipper 0,60
9 | Duct lubricator
Duct lubricator and cleaner. Other diameters are available. After pulling through these lubricators there is an equal lubrication of the duct wall on the complete length, which reduces the pulling forces up to 80 %.

Duct lubricator, duct cleaner,234856
Duct lubricator, duct cleaner,234858
Duct lubricator, duct cleaner,234860
Duct lubricator, duct cleaner,234862
Duct lubricator, duct cleaner,234864
Duct lubricator, duct cleaner,234866
Duct lubricator, duct cleaner,234868
Duct lubricator, duct cleaner,234870
Duct lubricator, duct cleaner,234872
Duct lubricator, duct cleaner,234874
Duct lubricator, duct cleaner,234876
Duct lubricator, duct cleaner,234878
Duct lubricator, duct cleaner,234880
CodeTypeDuct-ID Length kg
234856 RSG 5040-50 220 mm 0,28
234858 RSG 6050-60 240 mm 0,36
234860 RSG 7060-70 260 mm 0,44
234862 RSG 8070-80 280 mm 0,85
234864 RSG 10080-100 370 mm 0,95
234866 RSG 120100-120 390 mm 1,10
234868 RSG 140120-140 430 mm 1,40
234870 RSG 160140-160 480 mm 1,70
234872 RSG 180160-180 510 mm 2,15
234874 RSG 200180-200 550 mm 2,75
234876 RSG 220200-220 590 mm 3,15
234878 RSG 250220-250 530 mm 3,85
234880 Biggerdiameters not possible! 0,00