1 | Cover lifter
Cover lifter with triangular handle for light shaft covers, steel construction galvanized. Two required.

Cover-lifter,207110
CodeTypeDimension kg
207110 DHZ 10480x400x54 3,76
2 | Cover lifter
Cover lifter with spindle for heavy and blocked shaft covers. Please select the height of 540 mm or 700 mm. Steel construction galvanized. Two required

,207120
,207125
CodeTypeHeight Handle Width kg
207120 DHZ 20540 400 134 6,70
207125 DHZ 27700 400 134 6,90
3 | Cover lifter
Cover lifter mobile, capacity 600 kg for lifting and transporting away of heaviest shaft covers. High lifting capacity and stroke. Steel construction galvanized. Two required.

,207210
CodeTypeLift each/pair Lift height L/W/H mm kg
207210 DHF 06600/1200 kg 200 470x260x500 16,00
4 | Shaft edge rollers
Shaft edge rollers for protection of the pulling winch ropes. Steel construction galvanized. High-wattage steel roller with friction bearings.
Shaft-manhole-edge-rollers,202700
,202710
CodeTypeRoller-D Type SWL L/W/H mm kg
202700 SKS 1200/120/90 fix 1000 kg 250x250x250 12,70
202710 SKD 1200/120/90 swivelling 1000 kg 250x250x250 13,80
5 | Shaft edge rollers
Cable corner and shaft entrance roller, 45°, 3 rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Select this roller either with steel or with alu-rollers, see table below.

,202760
,202750
CodeTypeRoller-D / Mat. Rad. C-D SWL L/W/H mm kg
202760 SE 3-45S120/76/145, Steel 700 100 500 kg 530x430x230 14,40
202750 SE 3-45A125/60/146, Alu 700 100 500 kg 530x430x230 14,20
6 | Shaft edge rollers
Cable corner and shaft entrance roller, 90°, 3 rollers. Bending radius 700 mm. Steel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Select this roller either with steel or with alu-rollers, see table below.

,202820
,202810
CodeTypeRoller-D / Mat. Rad. C-D SWL L/W/H mm kg
202820 SE 6-90S120/76/145, Steel 700 100 500 kg 750x750x230 24,60
202810 SE 6-90A125/60/146, Alu 700 100 500 kg 750x750x230 24,20
7 | Cable deviation device
Cable deviation devices for big cable bending radius. Especially for big high voltage cables. Steel construction galvanized. Suitable for many applications, e.g. in shafts, channels or as shaft entrance rollers. See pdf drawings on the left, examples of complete deviation steel construction in cable shafts.
For a complete cable deviation construction can be used:
205.180-205.260, high stressable canal braces in length from 0,80 - 3,00 m
205.340, brace connector for cross-connection of two canal braces tubes of diam. 48-60.
205.630, brace hinge for fixing any brace to nay angular concrete shaft wall.
202.848, locking tube bow for fitting or retrofitting on deviation rollers SE 3 to SE 9 securing the cable.
,202840
,202842
CodeTypeRoller-D / Mat. Rad. C-D SWL L/W/H mm kg
202840 SE 6-90S120/76/145, Steel 1100 100 500 kg 25,20
202842 SE 8-90S120/76/145, Steel 1500 100 800 kg 41,00
8 | Locking tube bow
Locking tube bow for fitting and retrofitting on cable deviation devices SE 6-9, securing pulling rope and the cable while winch tension release. 4 of them are necessary for 1 bow. Can be mounted and dismounted by hand without any tool.

,202848
CodeTypeSuitable for kg
202848 VSB 3-90to all cable deviation devices SE 6 to SE 9 0,50