1 | Manual cable length measuring devices
Manual cable length measuring devices with counter up to 999,99,99 m. Accuracy ± 0,8 %, figure height 4 mm.
Types HK .. only for cables, types HD .. S with hardened rollers also for steel ropes.
KB 01 Calibration. Justification before delivery through Vetter, not governmental authorization.
Red hand grip can be unscrewed to screw the device on any other machine.
Manual-cable-length-measuring-devices,length-meter,262460
Manual-cable-length-measuring-devices,length-meter,262400
Manual-cable-length-measuring-devices,length-meter,262470
Manual-cable-length-measuring-devices,length-meter,262410
Manual-cable-length-measuring-devices,length-meter,262480
CodeTypeC-D pcs.-rope L/W/H mm kg
262460 HK 113-21 no 300x150x70 1,30
262400 HD 11S3-21 3-12 300x150x70 1,40
262470 HK 123-50 no 330x190x70 1,98
262410 HD 12S3-50 3-22 330x190x70 2,00
262480 KB 01Calibration - - 0,01
2 | Manual cable length measuring devices
Manual cable and line length measuring devices with counter up to 9999,99 m. Accuracy ± 2,0 %. Figure height 7 mm. Laterally open for endless measuring of cables and conductors. Constant spring pressure and fine adjustment.

Manual-cable-length-measuring-devices,length-meter,262500
CodeTypeC-D pcs.-rope L/W/H mm kg
262500 KDM 455-45 5-20 290x150x120 2,30
3 | Cable length measuring devices
Cable length measuring device, measuring wheel circumference of 500 mm, with counter up to 9999,99 m. Accuracy ± 1,0 %. Figure height 7 mm. Suitable for use in any positions, e.g. hanging on the cable, or as floor type. A spring ensures constant wheel pressure to cable.

Cable length measuring devices,262530
CodeTypeC-D pcs.-rope L/W/H mm kg
262530 KLM 11025-110 no 275x325x425 13,00
4 | Cable and wire length measuring machines
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
The measuring accuracy of all LM machines is of ± 0,2 %. Figure height 7 mm.
The accuracy refers to a calibrated cable of a length of at least 20 m.
Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322736
Cable length measuring machines,322737
Cable length measuring machines,322742
Cable length measuring machines,322743
Cable length measuring machines,322748
Cable length measuring machines,322749
Cable length measuring machines,322754
Cable length measuring machines,322755
CodeTypeC-D pcs.-rope L/W/H mm kg
322736 LM 201-20 no 360/280/400 13,30
322737 LM 20S1-20 1-8 360/280/400 13,70
322742 LM 403-40 no 550/300/420 28,50
322743 LM 40S3-40 3-22 550/300/420 28,50
322748 LM 6010-60 no 700/360/600 54,00
322749 LM 60S10-60 6-32 700/360/600 54,00
322754 LM 8010-80 no 870/395/670 127,00
322755 LM 80S10-80 10-55 870/395/670 128,00
5 | Leading bushings
Leading bushings for thin cables and ropes to length machine LM 20 and LM 20 S. Set of 2 pcs., easy to change.

Leading bushings,322738
Leading bushings,322739
CodeTypeSuitable for Cable/wire-D Mounted kg
322738 BU 06LM 20/20 S <= 5 mm no, accessory 0,16
322739 BU 14LM 20/20 S <= 12 mm yes, LM 20 S 0,16
6 | Leading rollers
Leading in- and out rollers for fitting on cable length measuring machines LM 20 and LM 20 S. 4 steel rollers

Cable length measuring machines,322741
CodeTypeSuitable for Cable/wire-D kg
322741 ER 20LM 20/20 S max. 20 mm 1,20
7 | Roller bow
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM. pcs.eel rollers D 25 mm.
Type RB 4090 and 6090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers.
Type RB 4018 and 6018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers.
Cable length measuring machines,322783
Cable length measuring machines,322784
Cable length measuring machines,322781
Cable length measuring machines,322782
CodeTypeSuitable for C-D Passage Deviation L/W/H mm kg
322783 RB 4090LM 60/60S max. 40 mm 45x45 mm 90° 400x180x380 10,10
322784 RB 4018LM 40/40S max. 40 mm 45x45 mm 180° 400x180x450 11,00
322781 RB 6090LM 60/60S max. 60 mm 65x65 mm 90° 450x200x500 13,00
322782 RB 6018LM 60/60S max. 60 mm 65x65 mm 180° 450x180x550 15,00
8 | Conformity assessment for LM 20-80
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.

Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
Kabellängenmessgerät,Kabellängenmeßgerät,322790
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
9 | Declaration of Conformity for LM 20-80
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
 
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Cable length measuring machine,322792
CodeType kg
322792 KT 001 0,01
10 | Calibration of length measuring machines LM 20-80
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.

Cable length measuring machine,322795
CodeType kg
322795 KA 001 0,02
11 | Verification of LM 20-80 before 2015
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.

Kabellängenmessgerät,Kabellängenmeßgerät,322796
CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
12 | Cable length measuring machine
Cable length measuring machine, very robust construction, measuring wheel circumference of 500 mm, with mechanical counter up to 9999,99 m. Accuracy ± 0,4 %. Figure height 7 mm. Can be equipped with a pre-set counter as accessory with automatic stop facility.

Cable length measuring machine,262610
CodeTypeC-D pcs.-rope L/W/H mm kg
262610 KLM 12020-120 no 505/280/600 67,00
13 | Electronic pre-set counter
Electronic pre-set counter 230V/AC, without cables, with control panel. For pre-set of the cable length with automatic stop facility. Only for single cable length measuring machines. Select cable as accessory in your length.

Pre-set counter,322764
Pre-set counter,322765
Pre-set counter,322766
Pre-set counter,322767
CodeTypeSuitable for Cable length kg
322764 ZE 212PLM 20-80 + KLM 120 without 3,30
322765 KALM 20-80 + KLM 121 2,0 m 0,30
322766 KALM 20-80 + KLM 122 5,0 m 0,40
322767 KALM 20-80 + KLM 123 10,0 m 0,50