1 | Cable corner rollers
Cable corner roller with 2 vertical and 1 horizontal steel roller with ball bearings. pcs.eel tube construction galvanized. These corner rollers can be connected in any quantity to form a correct curve according to the bending radius of the cable. Please open the drawing pdf here on the left.

Cornerrollers,roller,202600
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
202600 ERS 3120/76/145 pcs.eel up to 100 mm 400 kg 620x310x280 12,00
2 | Cable corner rollers
Cable corner roller with 2 vertical and 1 horizontal steel roller with ball bearings. Sheet steel construction galvanized. These corner rollers can be connected in any quantity to form a correct curve according to the bending radius of the cable. Please open the pdf here on the left.

Cornerrollers,roller,202624
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
202624 ERQ 3120/76/185 pcs.eel up to 120 mm 300 kg 450x330x300 16,00
3 | Cable corner rollers
Cable corner rollers high-wattage steel tube construction for heavy high voltage cables. With 2 vertical and 1 horizontal steel roller with ball bearings. This special rocker construction allows an absolute equal radial load to the cable in any corner situation. These corner rollers can be connected in any quantity to form a correct curve according to the bending radius of the cable. Please open the drawing pdf here on the left.

Cornerrollers,roller,202660
Cornerrollers,roller,202670
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
202660 EWS 3-11080/216 pcs.eel 110 mm 800 kg 450x390x340 23,50
202670 EWS 3-17080/216 pcs.eel 170 mm 800 kg 470x450x400 29,80
4 | Fixing nails
Fixing nails steel galvanized for fixing of all cable rollers and cable corner rollers to the ground. For best and safe fixing nails of a length of 100 cm are recommended.

Fixing nails,205730
Fixing nails,205740
CodeTypeRound steel-D Length kg
205730 BN 7016 mm 70 cm 1,10
205740 BN 10016 mm 100 cm 1,58
5 | Cable corner rollers
Cable corner and shaft entrance roller, 45°, 3 rollers. Bending radius 700 mm. pcs.eel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Select this roller either with steel or with alu-rollers, see table below.

Shaft edge rollers,202760
Shaft edge rollers,202750
CodeTypeRoller-D, Mat. Radius Cable-D SWL L/W/H mm kg
202760 SE 3-45S120/76/145, pcs.eel 700 100 mm 500 kg 530x430x230 14,40
202750 SE 3-45A125/60/146, Alu 700 100 mm 500 kg 530x430x230 14,20
6 | Cable corner rollers
Cable corner and shaft entrance roller, 90°, 3 rollers. Bending radius 700 mm. pcs.eel construction galvanized. Universal roller type e.g. for horizontal or vertical cable diversion. Select this roller either with steel or with alu-rollers, see table below.

Shaft edge rollers,202820
Shaft edge rollers,202810
CodeTypeRoller-D, Mat. Radius Cable-D SWL L/W/H mm kg
202820 SE 6-90S120/76/145, pcs.eel 700 100 mm 500 kg 750x750x230 24,60
202810 SE 6-90A125/60/146, Alu 700 100 mm 500 kg 750x750x230 24,20
7 | Cable deviation device
Cable deviation devices for big cable bending radius. Especially for big high voltage cables. pcs.eel construction galvanized. Suitable for many applications, e.g. in shafts, channels or as shaft entrance rollers. See pdf drawings on the left, examples of complete deviation steel construction in cable shafts.
For a complete cable deviation construction can be used:
205.180-205.260, high stressable canal braces in length from 0,80 - 3,00 m
205.340, brace connector for cross-connection of two canal braces tubes of diam. 48-60 mm.
205.630, brace hinge for fixing any brace to nay angular concrete shaft wall.
202.848, locking tube bow for fitting or retrofitting on deviation rollers SE 3 to SE 9 securing the cable.
Shaft edge rollers,202840
Shaft edge rollers,202842
CodeTypeRoller-D, Mat. Radius Cable-D SWL L/W/H mm kg
202840 SE 6-90S120/76/145, pcs.eel 1100 100 mm 500 kg 25,20
202842 SE 8-90S120/76/145, pcs.eel 1500 100 mm 800 kg 41,00
8 | Locking tube bow
Locking tube bow for fitting and retrofitting on cable deviation devices SE 6-9, securing pulling rope and the cable while winch tension release. 4 of them are necessary for 1 bow. Can be mounted and dismounted by hand without any tool.

Shaft edge rollers,202848
CodeTypeSuitable for kg
202848 VSB 3-90to all cable deviation devices SE 6 to SE 9 0,50
9 | Cable diversion rollers
Cable diversion roller 45°, with 3 rollers of steel or alu. pcs.eel construction galvanized. Two or more of them can be coupled. Select this roller either with steel or with alu-rollers, see table below. On the rear side there are 2 clamps for fixing the equipment on a channel brace for cable diversions in manholes. Order braces separately acc. to needed length, see further below.

Diversionrollers,202851
Diversionrollers,202850
CodeTypeRoller-D, Mat. Radius Cable-D SWL L/W/H mm kg
202851 KUG 3-45S120/76/145, pcs.eel 700 100 mm 500 kg 600x350x230 12,20
202850 KUG 3-45A125/60/146, Alu 700 100 mm 500 kg 600x350x230 12,00
10 | Cable lead-in rollers
Cable lead-in roller 45° with 3 or 4 rollers of alu or steel. These rollers with a cable lead-in tube can be fixed directly into the tube and be hold by a canal brace. Lead-in tube and brace to ordered separately. Select this roller either with steel or with alu-rollers, see table below. Order braces separately acc. to needed length, see further below. Order also cable lead-in tubes acc. to duct diam. separately, see code 209.560-209.620.

Cable lead-in rollers,202911
Cable lead-in rollers,202910
Cable lead-in rollers,202951
Cable lead-in rollers,202950
CodeTypeRoller-D, Mat. Radius Cable-D SWL L/W/H mm kg
202911 KEG 3-45S120/76/145, pcs.eel 700 100 mm 500 kg 600x350x230 14,50
202910 KEG 3-45A125/60/146, Alu 700 100 mm 500 kg 600x350x230 14,30
202951 KEG 4-45S120/76/145, pcs.eel 1100 100 mm 500 kg 800x300x230 21,10
202950 KEG 4-45A120/76/145, Alu 1100 100 mm 500 kg 800x300x230 20,90
11 | Cable guide rollers
Cable guide rollers for under or over passing of obstacles. pcs.eel-roller with ball bearings D 100/150 mm for heavy loads. Without braces, roller length see table below.

Guide-rollers,203150
Guide-rollers,203190
CodeTypeRoller-D Mat. Cable-D SWL LA/LI mm kg
203150 LR 20100 mm pcs.eel unlimited 500 kg 320/210 8,60
203190 LR 40100 mm pcs.eel unlimited 500 kg 420/310 10,70
12 | Cable protection roller
Cable protection roller, 1 steel roller with spindle extendable 350-500 mm. pcs.eel galvanized. Dimension see table below.

Cable protection roller,203250
CodeTypeRoller-D Mat. Extendable SWL L/W/H mm kg
203250 KSR 20060/200 pcs.eel 400-550 mm 100 kg 400x200x200 6,00
13 | Cable brace roller
Cable guide roller for under or over passing of obstacles. 1 alu-roller without canal brace, accessory. Roller dimension see table below.

Canal braces see 205.160-205.240
Braceroller,203300
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
203300 KSR 1A125/60/146 Alu up to 100 mm 100 kg 150x150x180 2,70
14 | Cable brace roller
Cable guide roller for under or over passing of obstacles. 1 heavy alu-roller for cables up to D 100 mm, without canal brace, accessory. Roller dimension see table below.

Canal braces see 205.160-205.240
Braceroller,203500
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
203500 ZR 220220/100/140 Alu up to 100 mm 300 kg 150x150x180 7,60
15 | Edge roller
Edge roller, alu-roller with ball bearings for walls and manhole edges, for cable-D 100 mm.

Edge roller,203640
CodeTypeRoller-D Mat. Cable-D SWL L/W/H mm kg
203640 ZRB 220220/100/140 Alu up to 100 mm 300 kg 150x150x180 15,90
16 | Cable bundle stand
Bundle stand, triangle changeable up or downgrade, on tripod with height adjustment, steel construction galvanized.

Bundlestand,203910
CodeTypeRoller-D Mat. SWL L/W/H mm kg
203910 BNB 342x320 pcs.eel 200 kg 900x900x1300 13,20
17 | Canal braces
Canal brace extendable, steel construction, powder coated black.

Canal-braces,205160
Canal-braces,205180
Canal-braces,205200
Canal-braces,205220
Canal-braces,205240
Canal-braces,205260
CodeTypeDuct-D Length kg
205160 KS 4-660 mm 40-60 cm 6,20
205180 KS 6-1060 mm 60-100 cm 8,50
205200 KS 8-1360 mm 80-130 cm 10,00
205220 KS 10-1760 mm 100-170 cm 11,50
205240 KS 14-2460 mm 140-240 cm 15,50
205260 KS 17-3060 mm 170-300 cm 19,80
18 | Brace connector
Brace connector for cross-connection of 2 canal braces or tubes. pcs.eel galvanized.

Canal-braces,205340
CodeTypeFor duct-D kg
205340 SPV 45-6045-60 mm 2,65
19 | Brace hinge
Brace hinge for fixing of any braces to any angular concrete shaft wall, galvanized.

Canal-braces,205630
CodeTypeSuitable for kg
205630 KSS 6-300all braces KS 4-6 to KS 17-30 2,00
20 | Cable roller bow
Cable roller bow mainly used in sea cable laying. pcs.eel construction galvanized. Pulleys of high wattage Polyamide plastic with ball bearings also of stainless steel. Dimension: L/W/H 3500x400x2550 mm.

Kabelschachteinlaufrolle,Schachteinlaufrolle,Einlaufrolle, Rollenbogen,202849
CodeTypePulley-D Rad. Cable-D SWL kg
202849 SE 12-180200/100x160/146 1560 mm 125 mm 4800 kg 245,00
21 | Double tandem pulleys
Double tandem pulleys, steel construction galvanized. Four high wattage Polyamide pulleys with ball bearings. Mainly used in sea cable laying. The device adapt automatically to each pulling angle. The double rocker construction allows big bending radius. See pdf-drawing on the left. SWL = safe working load

Double tandem pulleys,510243
Double tandem pulleys,510340
CodeTypePulley-D Groove Rad. 45° SWL L/W/H mm kg
510243 LKT 205P200/100 125 mm 2000 mm 5000 kg 1800x250x800 182,00
510340 LKT 300P300/120 230 mm 2800 mm 5000 kg 2500x400x850 251,00
22 | pcs.eel snatch blocks
pcs.eel snatch blocks, steel pulleys with friction bearing, swivelling hook. For diversion of pulling ropes and for mounting works on poles. Please pay attention to the max. allowed lifting load.
The lifting load must not be higher than 1/2 of the hook load
Please pay attention to the left-hand symbol
pcs.eel-snatch-blocks,548240
pcs.eel-snatch-blocks,548243
pcs.eel-snatch-blocks,548246
pcs.eel-snatch-blocks,548249
CodeTypePulley-D Groove Ø Hook load SWL Dimension kg
548240 DSR 1085/105 7 mm 1000 kg 500 kg 305x110x25 3,30
548243 DSR 20150/190 13 mm 2000 kg 1000 kg 425x200x30 8,90
548246 DSR 30180/220 15 mm 3200 kg 1600 kg 496x230x40 15,50
548249 DSR 60210/260 18 mm 6400 kg 3200 kg 655x280x50 26,50