1 | Hose securing grips, 2 loops
Hose securing grips with 2 loops, galvanized bowden wire. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
Grips,pulling,supporting,strain,relief,wind-power,connection,hose,securing,stockings,chines fingers,24600006
,24601006
,24603006
,24605006
,24608006
,24614006
,24619006
,24625006
,24630006
,24635006
CodeTypeHose-D B D kN L1/L2 kg
24600006 SC 10/26-10 18 5 6,6 600/740 0,05
24601006 SC 15/210-15 18 5 10,2 600/740 0,07
24603006 SC 20/215-20 18 5 12,9 600/780 0,15
24605006 SC 25/220-25 18 5 20,4 600/800 0,16
24608006 SC 30/225-30 18 5 24,3 600/800 0,18
24614006 SC 40/230-40 18 11 35,1 600/820 0,31
24619006 SC 50/240-50 20 12 48,0 600/850 0,47
24625006 SC 60/250-60 20 15 48,0 600/880 0,53
24630006 SC 70/260-70 20 15 63,9 600/930 0,65
24635006 SC 90/270-90 20 15 83,7 600/960 0,70
2 | Hose securing grips, 2+2 loops
Hose securing grips with 2 loops on each end. This type is mainly used for short hoses, where two single grips would be to long. For all water-, hydraulic or other high pressure hoses. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Material galvanized bowden wire. Any other length or in stainless steel are available in short term. Please ask for offers.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
,246000065
,246000075
,246000077
,246010065
,246010075
,246010077
,246030065
,246030075
,246030077
,246050065
,246050075
,246050077
,246080065
,246080075
,246080077
,246140065
,246140075
,246140077
,246190065
,246190075
,246190077
,246250065
,246250075
,246250077
,246300065
,246300075
,246300077
,246350065
,246350075
,246350077
CodeTypeHose-D B D kN L1/L2 kg
246000065 SCD 10/2+26-10 18 5 6,6 600/900 0,10
246000075 SCD 10/2+26-10 18 5 6,6 840/1200 0,15
246000077 SCD 10/2+26-10 18 5 6,6 920/1200 0,20
246010065 SCD 15/2+210-15 18 5 10,2 600/900 0,12
246010075 SCD 15/2+210-15 18 5 10,2 840/1200 0,18
246010077 SCD 15/2+210-15 18 5 10,2 920/1200 0,22
246030065 SCD 20/2+215-20 18 5 12,9 600/960 0,20
246030075 SCD 20/2+215-20 18 5 12,9 840/1200 0,25
246030077 SCD 20/2+215-20 18 5 12,9 920/1200 0,30
246050065 SCD 25/2+220-25 18 5 20,4 600/960 0,25
246050075 SCD 25/2+220-25 18 5 20,4 840/1200 0,30
246050077 SCD 25/2+220-25 18 5 20,4 920/1200 0,35
246080065 SCD 30/2+225-30 18 5 24,3 600/960 0,30
246080075 SCD 30/2+225-30 18 5 24,3 840/1200 0,35
246080077 SCD 30/2+225-30 18 5 24,3 920/1200 0,40
246140065 SCD 40/2+230-40 18 11 35,1 600/960 0,35
246140075 SCD 40/2+230-40 18 11 35,1 840/1200 0,45
246140077 SCD 40/2+230-40 18 11 35,1 920/1200 0,50
246190065 SCD 50/2+240-50 20 12 48,0 600/960 0,55
246190075 SCD 50/2+240-50 20 12 48,0 840/1200 0,65
246190077 SCD 50/2+240-50 20 12 48,0 920/1200 0,70
246250065 SCD 60/2+250-60 20 15 48,0 600/960 0,65
246250075 SCD 60/2+250-60 20 15 48,0 840/1200 0,75
246250077 SCD 60/2+250-60 20 15 48,0 920/1200 0,80
246300065 SCD 70/2+260-70 20 15 63,9 600/960 0,75
246300075 SCD 70/2+260-70 20 15 63,9 840/1200 0,85
246300077 SCD 70/2+260-70 20 15 63,9 920/1200 0,90
246350065 SCD 90/2+270-90 20 15 83,7 600/960 0,85
246350075 SCD 90/2+270-90 20 15 83,7 840/1200 0,95
246350077 SCD 90/2+270-90 20 15 83,7 920/1200 1,00
3 | Hose securing grips, 2 loops, lateral divided
Hose securing grips with 2 loops, galvanized bowden wire. Lateral divided with binding strand. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SC 30 loops without thimbles, from SC 40 loops with steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
,24701006
,24703006
,24705006
,24708006
,24714006
,24719006
,24725006
,24730006
CodeTypeHose-D B D kN L1/L2 kg
24701006 SC 15/2G10-15 18 5 10,2 600/740 0,07
24703006 SC 20/2G15-20 18 5 12,9 600/780 0,15
24705006 SC 25/2G20-25 18 5 20,4 600/800 0,16
24708006 SC 30/2G25-30 18 5 24,3 600/800 0,18
24714006 SC 40/2G30-40 18 11 35,1 600/820 0,31
24719006 SC 50/2G40-50 20 12 48,0 600/850 0,47
24725006 SC 60/2G50-60 20 15 48,0 600/880 0,53
24730006 SC 70/2G60-70 20 15 63,9 600/930 0,61
4 | Hose securing grips, 2 loops, stainless steel
Hose securing grips with 2 loops. Stainless steel bowden wire V4A/1.4401 with copper clamp. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length are available.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SCE 30 loops without thimbles, from SCE 40 loops with stainless steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
,24600046
,24601046
,24603046
,24605046
,24608046
,24614046
,24619046
,24625046
,24630046
,24635046
CodeTypeHose-D B D kN L1/L2 kg
24600046 SCE 10/26-10 15 5 6,6 600/740 0,05
24601046 SCE 15/210-15 18 5 10,2 600/740 0,07
24603046 SCE 20/215-20 18 5 12,9 600/780 0,15
24605046 SCE 25/220-25 18 5 20,4 600/800 0,16
24608046 SCE 30/225-30 18 5 24,3 600/800 0,18
24614046 SCE 40/230-40 18 11 35,1 600/820 0,31
24619046 SCE 50/240-50 20 12 48,0 600/850 0,47
24625046 SCE 60/250-60 20 15 48,0 600/880 0,53
24630046 SCE 70/260-70 20 15 63,9 600/930 0,65
24635046 SCE 90/270-90 20 15 83,7 600/960 0,70
5 | Hose securing grips, 2 loops, lateral divided, stainless steel
Hose securing grips with 2 loops. Lateral divided with binding strand. Stainless steel bowden wire V4A/1.4401 with copper clamp. All Vetter securing grips are handmade therefore of high flexibility. They adapt easy at any difference in hose diameter and are therefore simple to handle. Other versions, e.g. reinforced, different length or in stainless steel are available. For all water-, hydraulic or other high pressure hoses.
L1 = the lengths without cables in. L2 = total length included the loops.
The real length mounted on the cable can be much shorter, depending on the cable diameter.
Up to SCE 30 loops without thimbles, from SCE 40 loops with stainless steel thimbles
B = internal diameter of the loop
D = thickness of the loop
kN = minimum breaking load at equal pull on both loops
,24701046
,24703046
,24705046
,24708046
,24714046
,24719046
,24725046
,24730046
CodeTypeHose-D B D kN L1/L2 kg
24701046 SCE 15/2G10-15 18 5 10,2 600/740 0,07
24703046 SCE 20/2G15-20 18 5 12,9 600/780 0,15
24705046 SCE 25/2G20-25 18 5 20,4 600/800 0,16
24708046 SCE 30/2G25-30 18 5 24,3 600/800 0,18
24714046 SCE 40/2G30-40 18 11 35,1 600/820 0,31
24719046 SCE 50/2G40-50 20 12 48,0 600/850 0,47
24725046 SCE 60/2G50-60 20 15 48,0 600/880 0,53
24730046 SCE 70/2G60-70 20 15 63,9 600/930 0,61
6 | Hose securing loops
Hose securing loops for hose to gun or hose to hose. They adapt easy at any difference in hose diameter and are therefore simple to handle. Available in galv. steel or in stainless steel wire V4a, see table below. For all water-, hydraulic or other high pressure hoses. Minimum Braking Load for all these loops = 17,0 kN.
,254800
,254804
,254808
,254812
,254824
,254828
,254832
,254836
CodeTypeConnection Mat. Hose-D Length kg
254800 FSG 00-060SHose-gun Steel galv. 10-50 600 0,16
254804 FSS 10-060SHose-hose Steel galv. 10-25 600 0,25
254808 FSS 20-080SHose-hose Steel galv. 25-40 800 0,27
254812 FSS 40-120SHose-hose Steel galv. 30-50 1200 0,33
254824 FSG 00-060VHose-gun Stainl. V4a 10-50 600 0,18
254828 FSS 10-060VHose-hose Stainl. V4a 10-25 600 0,27
254832 FSS 20-080VHose-hose Stainl. V4a 25-40 800 0,30
254836 FSS 40-120VHose-hose Stainl. V4a 30-50 1200 0,34