1 | Cable pulling heads
Cable pulling heads for single-conductor cables. Mounted directly on the conductor, for this much higher pulling forces are possible compared with cable grips acting on the cover. For high voltage cables 110-550 kV, from 800-3200 mm². Easy mounting procedure on cable manufacturers place or in the field within 2-3 minutes. This pulling heads are reusable continuously.
 
Please ask for offer indicating exact techn. details of the cable.
Before dispatch of the cable one needs: 1 cable sleeve, 1 taper key, 1 cap.
Before pulling the cable the cap will be unscrewed and the fork head screwed on the sleeve.
Before cable pulling a cardan link and a swivel must be mounted on the pulling head.
Cable-pulling-head,243600
CodeTypeNeeded parts kg
243600 KZK-KombiSee description above 0,00
2 | Cable jointing sleeves
Cable jointing sleeves for cable pulling-heads for pre-mounting on the conductor of high voltage cables.
For high voltage cables 110-550 kV with CU- or AL-conductor of 400-2500 mm²
Easy and fast mounting in the factory or on the working site in approx. 2-3 minutes.
These pulling heads can be re-used many times.
kN = Minimum Breaking Load
Cable jointing sleeves,243911
Cable jointing sleeves,243922
Cable jointing sleeves,243941
Cable jointing sleeves,243956
Cable jointing sleeves,2439562
CodeTypeCross section Cond.-D OD kN kg
243911 KZH 06-630630 mm² 30-32 65 mm 125 1,50
243922 KZH 08-1200800-1200 mm² 34-44 76 mm 240 2,50
243941 KZH 12-16001200-1600 mm² 44-53 86 mm 320 4,00
243956 KZH 20-25002000-2500 mm² 53-66 100 mm 500 5,60
2439562 KZH 25-32002500-3200 mm² 66-74 115 mm 500 6,00
3 | Fork head
Fork heads for screwing on cable jointing sleeves immediately before pulling the cable in.
On the site 1-2 fork heads will be enough.
kN = Minimum Breaking Load
Fork head,243912
Fork head,243923
Fork head,243942
Fork head,243957
Fork head,2439572
CodeTypeCross section Sleeve-D Fork Bolt kN kg
243912 GAB 06-630630 mm² 65 mm 26 24 300 1,60
243923 GAB 08-1200800-1200 mm² 76 mm 30 27 320 2,50
243942 GAB 12-16001200-1600 mm² 86 mm 35 30 400 3,10
243957 GAB 20-25002000-2500 mm² 100 mm 38 36 500 5,50
2439572 GAB 25-32002500-3200 mm² 115 mm 38 36 500 7,00
4 | Hollow cone taper key
Hollow cone taper key for cable pulling heads for segmented conductors.
Segment conductors with a centre rope need hollow taper keys.
Exact conductor diameter is needed for an offer
Also diameter of the centre core is needed.
Cone taper key,243926
Cone taper key,243943
Cone taper key,243945
Cone taper key,243947
Cone taper key,243950
Cone taper key,243958
Cone taper key,2439601
Cone taper key,243961
Cone taper key,243960
Cone taper key,2439612
Cone taper key,2439614
CodeTypeCross section Cond.-D kg
243926 KEIH 43-12001200-1400 mm² 42,0-43,3 0,17
243943 KEIH 46-14001200-1400 mm² 44,0-46,7 1,00
243945 KEIH 50-16001200-1600 mm² 48,0-50,3 0,70
243947 KEIH 53-16001400-1600 mm² 51,0-53,0 0,30
243950 KEIH 55-20001400-1600 mm² 53,2-56,5 0,35
243958 KEIH 57-25002000-2500 mm² 56,6-59,0 1,40
2439601 KEIH 60-20002000-2500 mm² 58,5-60,5 1,03
243961 KEIH 59-25002000-2500 mm² 59,0-63,0 1,00
243960 KEIH 63-25002000-2500 mm² 63,0-66,0 0,70
2439612 KEIH 66-32002500-3200 mm² 66,1-68,5 1,00
2439614 KEIH 68-32002500-3200 mm² 68,6-71,2 1,00
5 | Solid cone taper key
Solid cone taper key for cable pulling heads for round conductors.
For stranded conductors plane solid keys are used.
Exact conductor diameter is needed for an offer
Cone taper key,243924
Cone taper key,2439241
Cone taper key,243925
Cone taper key,2439251
Cone taper key,2439254
Cone taper key,2439255
Cone taper key,2439256
Cone taper key,243959
Cone taper key,2439591
CodeTypeCross section Cond.-D kg
243924 KEIV 35-800800-1200 mm² 32,0-34,8 0,40
2439241 KEIV 37-800800-1200 mm² 34,9-36,9 0,34
243925 KEIV 39-1000800-1200 mm² 37,0-39,3 0,28
2439251 KEIV 41-1000800-1200 mm² 39,5-42,2 0,21
2439254 KEIV 44-1000800-1200 mm² 41,6-43,5 0,15
2439255 KEIV 46-10001200-1600 mm² 43,6-45,5 0,20
2439256 KEIV 48-10001200-1600 mm² 45,6-47,5 0,20
243959 KEIV 56-23002000-2500 mm² 55,5-58,0 1,50
2439591 KEIV 67-32002500-3200 mm² 65,5-67,4 1,66
6 | Mounting tool
Mounting tool for all cable pulling heads for segment conductors with central rope. Made of special high quality steel, for beating in round taper keys.

Mounting tool,243997
Mounting tool,243998
Mounting tool,243999
CodeTypeCross section Central rope Dimension kg
243997 KMB 12-16001200-1600 mm² D 11 mm D 22x200 0,80
243998 KMB 20-25002000-2500 mm² D 17 mm D 28x200 0,90
243999 KMB 25-32002500-3200 mm² D 20 mm D 34x200 1,00
7 | Cardan joint
Cardan joint for flexible connection of the cable pulling heads with the pulling rope-swivels.
Together with the swivels it functions like a globe joint.
Important for pulling the cable through curves in different directions.
kN = Minimum Breaking Load
Cardan-joint,243976
Cardan-joint,243978
Cardan-joint,243982
Cardan-joint,243985
CodeTypeTo pulling head Swivel kN kg
243976 KKG 06-630OD 65 mm V 55 D 180 2,60
243978 KKG 08-1200OD 76 mm V 65 D 280 4,10
243982 KKG 12-1600OD 86 mm V 75 D 500 6,45
243985 KKG 20-2500OD 100-115 mm V 75 D 500 6,70
8 | Swivels
Swivels with friction bearings, turnable connector between winch rope and cable grip. The friction bearing guarantees that the swivel reduces rotation and torsion with increasing pulling force. Not suitable for pulling overhead lines.
Swivels for underground cables must be equipped only with friction bearings.
With increasing pulling force friction bearings twist harder and thus avoid the untwisting of the pulling rope
Ball bearings let untwist the ropes and leads to destruction.
kN = Minimum Breaking Load
Swivels,connector,243140
Swivels,connector,243150
Swivels,connector,243180
Swivels,connector,243190
Swivels,connector,243200
Swivels,connector,243220
CodeTypeCross section D L Fork Bolt. kN kg
243140 V 50 D300 mm² 50 187 18 16 165 1,90
243150 V 55 D630 mm² 55 190 20 18 180 2,30
243180 V 65 D800-1200 mm² 65 235 26 24 300 3,42
243190 V 75 D1200-2500 mm² 75 270 30 27 320 6,70
243200 V 85 D1200-2500 mm² 85 315 34 30 400 9,40
243220 V 100 D1200-2500 mm² 100 350 38 36 500 14,50
9 | Closing cap
Closing cap with eye nut for screwing on the cable jointing sleeves.
With the caps screwed on the cones the cable ends can be fixed on the drum.
For pulling the cable, the cap will be unscrewed and replaced by the fork head.
In no case must be pulled cables using this cap.
Closing cap,243965
Closing cap,243968
Closing cap,243970
Closing cap,243972
Closing cap,2439722
CodeTypeFor sleeve-D kN kg
243965 ADK 65-63065 mm not for cable pulling 1,18
243968 ADK 76-120076 mm not for cable pulling 1,25
243970 ADK 86-160086 mm not for cable pulling 1,40
243972 ADK 100-2500100 mm not for cable pulling 1,60
2439722 ADK 115-3200115 mm not for cable pulling 2,00
10 | Cable guiding cones
Cable guiding cones of polyamide for soft running through the rollers of cable pulling heads.
The cones should be used if the cable is much bigger than the pulling head.
This combination guarantees a friction-free rolling of the cable through all parts of the roller line.
Closing cap,24399126
Closing cap,24399250
Closing cap,24399445
CodeTypePolyamide-D For sleeve-D kg
24399126 KFK 76-13076/130/110 76 mm 0,57
24399250 KFK 86-13086/130x130 86 mm 0,44
24399445 KFK 100-140100/140x130 100 mm 0,46