1 | Manual cable coiler, cable-D 3-30 mm
Manual cable coiler, column type, without coil winder, see table below. Without drum adapter shaft. For cable-D 3-30 mm. Prepared for one of the manual length measuring device, see below. Base plate 600x600 mm, through tilting easy moving by hand by 2 poly-wheels. Height to coiler centre approx. 850 mm.
Basic machine without accessory, please select below according to your need:
Manual length measuring device HD 11S for cable-Ø to 21 mm, or HD 12S for cable-Ø to 50 mm, see table below.
Different coil winders, see table below
Adapter shaft for wooden or plastic spools, see below
Manual-cable-coiling-machines,322308
CodeTypeDescription accessory kg
322308 DH 28Manual cable coiler see below 60,00
2 | accessory to DH 28
Coil winders and adapter shaft for wooden or plastic spools. With these the hand cable coiler can be assembled by yourself in any configuration. For this please select accessories below.
Manual-cable-coiling-machines,322635
Manual-cable-coiling-machines,322634
Manual-cable-coiling-machines,322673
CodeTypeDescript. Coil winder dimension Cable-D/m Cap. kg
322635 DW 30VCoil winder D 800/250-660, In 70-250 10/850, 30/35 100 kg 39,00
322634 DW 26VKCoil winder D 600/200-420, In 35-200 10/340, 20/65 100 kg 27,00
322673 DS 32HAdapter shaft Wooden/plastic spools D 850, B 400 mm 100 kg 5,60
3 | Adapter for HD 11 or HD 12 on DH 28
Support for mounting length measuring device HD 11S or HD 12S on coiler machine DH 28.

Manual-cable-coiling-machines,322309
CodeTypeSuitable for kg
322309 TK 28HD 11S or HD 12S 2,40
4 | Manual cable length measuring devices
Manual cable length measuring devices with counter up to 999,99,99 m. Accuracy ± 0,8 %, figure height 4 mm.
Types HK .. only for cables, types HD .. S with hardened rollers also for steel ropes.
KB 01 Calibration. Justification before delivery through Vetter, not governmental authorization.
Red hand grip can be unscrewed to screw the device on any other machine.
Manual-cable-length-measuring-devices,length-meter,262400
Manual-cable-length-measuring-devices,length-meter,262410
Manual-cable-length-measuring-devices,length-meter,262480
CodeTypeC-D St-rope L/W/H mm kg
262400 HD 11S3-21 3-12 300x150x70 1,40
262410 HD 12S3-50 3-22 330x190x70 2,00
262480 KB 01Calibration - - 0,01
5 | Manual cable coiler, cable-D 3-30 mm
Manual cable coiling machine, mobile steel construction. Without drum adapter shaft, without coil winder, see table below. For cable-D 3-30 mm, or steel rope D 1-8 mm. Prepared for one of length measuring devices LM 20 - LM 40 S, see below. L/W: 1600x660 mm. Cable entrance height approx. 1150 mm.
Basic machine without accessory, please select below according to your need:
Cable length measuring device LM 20 for cable, or LM 20 S for steel ropes
Cable length measuring device LM 40 for cable, or LM 40 S for steel ropes
Different coil winders, see table below
Adapter shaft for wooden or plastic spools, see below
Manual-cable-coiling-machines,322313
Manual-cable-coiling-machines,322634
Manual-cable-coiling-machines,322635
Manual-cable-coiling-machines,322673
CodeTypeDescript. Coil winder dimension Cable D/m Cap. kg
322313 DH 31Without access. --- --- 100 kg 96,00
322634 DW 26VKCoil winder D 600/200-420, In 35-200 10/340, 20/65 100 kg 27,00
322635 DW 30VCoil winder D 800/250-660, In 70-250 10/850, 30/35 100 kg 39,00
322673 DS 32HAdapter For wooden or plastic drums Drum-D 850x400 100 kg 5,60
6 | Cable and wire length measuring machines
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
The measuring accuracy of all LM machines is of ± 0,2 %.
The accuracy refers to a cable length of at least 20 m.
Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322736
Cable length measuring machines,322737
Cable length measuring machines,322742
Cable length measuring machines,322743
CodeTypeC-D St-rope L/W/H mm kg
322736 LM 201-20 no 360/280/400 13,30
322737 LM 20S1-20 1-8 360/280/400 13,70
322742 LM 403-40 no 550/300/420 28,50
322743 LM 40S3-40 3-22 550/300/420 28,50
7 | Leading bushings
Leading bushings for thin cables and ropes to length machine LM 20 and LM 20 S. Set of 2 paces., easy to change.

Cable length measuring machines,322738
Cable length measuring machines,322739
CodeTypeSuitable for Cable/wire-D Mounted kg
322738 BU 06LM 20/20S <= 5 mm no, accessory 0,16
322739 BU 14LM 20/20S <= 12 mm yes, LM 20 S 0,16
8 | Leading rollers
Leading in- and out rollers for fitting on cable length measuring machines LM 20 and LM 20 S. 4 steel rollers

Cable length measuring machines,322741
CodeTypeSuitable for Cable/wire-D kg
322741 ER 20LM 20/20S max. 20 mm 1,20
9 | Roller bow
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM 40 and LM 40 S.
Type RB 4090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers D 25 mm.
RB 4018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers D 25 mm.
Cable length measuring machines,322783
Cable length measuring machines,322784
CodeTypeSuitable for C-D Passage Deviation L/W/H mm kg
322783 RB 4090LM 40/40S max. 40 mm 45x45 mm 90° 400x180x380 10,10
322784 RB 4018LM 40/40S max. 40 mm 45x45 mm 180° 400x180x450 11,00
10 | Conformity assessment for LM 20-80
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.

Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
Kabellängenmessgerät,Kabellängenmeßgerät,322790
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
11 | Declaration of Conformity for LM 20-80
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
 
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Cable length measuring machines,322792
CodeType kg
322792 KT 001 0,01
12 | Calibration of length measuring machines LM 20-80
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.

Cable length measuring machines,322795
CodeType kg
322795 KA 001 0,02
13 | Verification of LM 20-80 before 2015
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.

Kabellängenmessgerät,Kabellängenmeßgerät,322796
CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
14 | Roller bow with adapter
Roller bow with adapter for support for unwinding cables from drums of upper stands. Please order support TK 10, code 322.614 separately.

Cable length measuring machines,322613
CodeTypeSuitable for kg
322613 RB 45DH 31 6,80
15 | Coil winder collapsible
Coil winder adjustable in diameter and width. Collapsible for fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. As accessory also available eccentric clamp code 322.875, KE 41 for cable-D 5-30 mm.

Coil-winder-adjustable,collapsible,322634
CodeTypeC-winder to Coil winder dimension Cable-D/m Cap. kg
322634 DW 26VKDH 28-31 D 600/200-420, int. 35-200 10/340, 20/65 100 kg 27,00
16 | Manual cable coiler, cable-D 3-30 mm
Manual cable coiling machine, mobile steel construction. Without drum adapter shaft, without coil winder, see table below. For cable-D 3-30 mm, or steel rope D 1-8 mm. Prepared for one of length measuring devices LM 20 - LM 40 S, see below. L/W: 1600x660 mm. Cable entrance height approx. 1150 mm.

Manual-cable-coiling-machines,322635
CodeTypeDescript. Coil winder dimension Cable-D/m Cap. kg
322635 DW 30VCoil winder D 800/250-660, In 70-250 10/850, 30/35 100 kg 39,00
17 | Eccentric clamp
Eccentric clamp for fixing the cable head to the coil winder for winding procedure.

Eccentric clamp,322875
CodeTypeSuitable for For C-D kg
322875 KE 41all coil winders DW 26-50 5-30 mm 0,30
18 | Cable loops
Cable loops for fixing the cable head to the coil winder for winding procedure.

Cable loops,322869
Cable loops,322870
CodeTypeSuitable for Length Steel rope-D kg
322869 KS 265all coil winders 265 mm 2,0 mm 0,02
322870 KS 300all coil winders 300 mm 2,0 mm 0,02
19 | Adapter for drums
Adapter for wooden or plastic drums on manual cable coiling machines DH 28 / DH 31.

Ring-winder,coiler,spooler,322673
CodeTypeSuitable for For drums max. kg
322673 DS 32HDH 28-31 D 850x400 mm 5,60
20 | Cable ring unwinder
Cable ring unwinder, without support TK 10.

Ring-winder,coiler,spooler,322610
Ring-winder,coiler,spooler,322611
Support of ring winder,322614
CodeTypeSuitable for For cable rings kg
322610 DA 70DH 31 D 250-600 mm, height 270 mm 8,40
322611 DA 80DH 31 D 250-700 mm, height 270 mm 12,70
322614 TK 10DH 31 + DE 30 F Support to DA 70, DA 80 + RB 45 8,20
21 | Hand cutter
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines LM 20-40.

Hand-cable-cutter,322810
Hand-cable-cutter,322812
Hand-cable-cutter,322815
Hand-cable-cutter,322816
CodeTypeSuitable for For C-D St-ropes kg
322810 HK 35LM 20 35 mm no 5,80
322812 HS 35LM 20S 10 mm 10 mm 6,30
322815 HK 40LM 40 40 mm no 5,30
322816 HS 40LM 40S 14 mm 14 mm 4,80