1 | Manual cable coilers, cable-D 3-16 mm
Manual cable coilers on table plate with coil winder DW 20S with crank for winding small cables from small drums on rings or from rings to rings. Without length measuring device, prepared to take length measuring equipment HK 11 or HD 11 S optional. accessory see table below.
Type DH 15 has no unwinding unit, which is included in DH 15 A.
Base plate of 28 mm Base plate of glued wood 1000x250 mm
With conic coil winder DW 20S, without ring unwinder.
Prepared for mounting hand length measuring devices HK 11 or HD 11S.
Manual-cable-coilers,322303
CodeTypeC-D Coil winder Coil winder dimension Cable D/m kg
322303 DH 153-16 mm DW 20S D 380/150-170x100 5/200, 15/20 12,30
2 | Manual cable coilers, cable-D 3-16 mm
Manual cable coilers on table plate with coil winder DW 20S with crank for winding small cables from small drums on rings or from rings to rings. Incl. coil unwinder DA 20, diam. 500x200x350 mm. Without length measuring device, prepared to take length measuring equipment HK 11 or HD 11 S optional. accessory see table below.
In type DH 15 A is included the unwinding unit DA 20, D 500x200x350 mm.
Base plate of 28 mm Base plate of glued wood 1250x250 mm.
With conic coil winder DW 20S, without ring unwinder.
Prepared for mounting hand length measuring devices HK 11 or HD 11S.
Manual-cable-coilers,322304
CodeTypeC-D Coil winder Coil winder dimension Cable D/m kg
322304 DH 15A3-16 mm DW 20S D 380/150-170x100 5/200, 15/20 21,90
3 | Manual cable length measuring devices
Manual cable length measuring devices with counter up to 999,99,99 m. Accuracy ± 0,8 %, figure height 4 mm.
Types HK .. only for cables, types HD .. S with hardened rollers also for steel ropes.
KB 01 Calibration. Justification before delivery through Vetter, not governmental authorization.
Red hand grip can be unscrewed to screw the device on any other machine.
Manual-cable-length-measuring-devices,length-meter,262460
Manual-cable-length-measuring-devices,length-meter,262400
Manual-cable-length-measuring-devices,length-meter,262470
Manual-cable-length-measuring-devices,length-meter,262410
Manual-cable-length-measuring-devices,length-meter,262480
CodeTypeC-D St-rope L/W/H mm kg
262460 HK 113-21 no 300x150x70 1,30
262400 HD 11S3-21 3-12 300x150x70 1,40
262470 HK 123-50 no 330x190x70 1,98
262410 HD 12S3-50 3-22 330x190x70 2,00
262480 KB 01Calibration - - 0,01
4 | Coil winder fixed centre
Conical coil winder with fixed centre and foot.

Coil-winder-fixe,322623
Coil-winder-fixe,322625
CodeTypeC-winder to Coil winder dimension Cable-D/m Cap. kg
322623 DW 18SDH 15-16 D 300/80-90, int. 60 5/70, 10/16 10 kg 4,00
322625 DW 20SDH 15-16 D 380/150-170, int. 100 5/200, 15/20 20 kg 4,50
5 | Manual cable coilers, cable-D 1-16 mm
Manual cable coilers on table plate with winder DW 20 with crank for winding small cables from small drums on rings or from rings to rings. Without length measuring device, prepared to take length measuring equipment HK 11 or HD 11 S optional. accessory see table below.
Base plate of 28 mm Base plate of glued wood 1000x250 mm
With conic coil winder DW 20, without ring unwinder.
Prepared for mounting length measuring machines LM 20 or LM 20 S
Manual-cable-coilers,322305
CodeTypeC-D Coil winder Coil winder kg
322305 DH 161-16 mm DW 20 D 380/150-170x100 11,30
6 | Manual cable coilers, cable-D 1-16 mm
Manual cable coilers on table plate with cable winder DW 20 with crank for winding small cables from small drums on rings or from rings to rings. Included unwinder DA 20, D 500x200x350 mm. Without length measuring device, prepared to take length measuring equipment LM 20 or LM 20 S.
Base plate of 28 mm Base plate of glued wood 1000x250 mm
With conic coil winder DW 20 and with ring unwinder.
Prepared for mounting length measuring machines LM 20 or LM 20 S
Manual-cable-coilers,322307
CodeTypeC-D Coil winder Coil winder kg
322307 DH 16A1-16 mm DW 20 D 380/150-170x100 20,80
7 | Cable and wire length measuring machines
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
The measuring accuracy of all LM machines is of ± 0,2 %.
The accuracy refers to a cable length of at least 20 m.
Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322736
Cable length measuring machines,322737
CodeTypeC-D St-rope L/W/H mm kg
322736 LM 201-20 no 360/280/400 13,30
322737 LM 20S1-20 1-8 360/280/400 13,70
8 | Leading bushings
Leading bushings for thin cables and ropes to length machine LM 20 and LM 20 S. Set of 2 paces., easy to change.

Leading bushings,322738
Leading bushings,322739
CodeTypeSuitable for Mounted Cable/wire-D kg
322738 BU 06LM 20/20S no, accessory <= 5 mm 0,16
322739 BU 14LM 20/20S yes, LM 20 S <= 12 mm 0,16
9 | Leading rollers
Leading in- and out rollers for fitting on cable length measuring machines LM 20 and LM 20 S. 4 steel rollers

Cable length measuring machines,322741
CodeTypeSuitable for Cable/wire-D kg
322741 ER 20LM 20/20S max. 20 mm 1,20
10 | Conformity assessment for LM 20-80
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.

Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
Kabellängenmessgerät,Kabellängenmeßgerät,322790
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
11 | Declaration of Conformity for LM 20-80
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
 
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Cable length measuring machines,322792
CodeType kg
322792 KT 001 0,01
12 | Calibration of length measuring machines LM 20-80
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.

Cable length measuring machines,322795
CodeType kg
322795 KA 001 0,02
13 | Verification of LM 20-80 before 2015
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.

Kabellängenmessgerät,Kabellängenmeßgerät,322796
CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
14 | Hand cutter
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines LM 20-40.

Hand-cable-cutter,322810
Hand-cable-cutter,322812
CodeTypeSuitable for For C-D St-ropes kg
322810 HK 35LM 20 35 mm no 5,80
322812 HS 35LM 20S 10 mm 10 mm 6,30