1 | Cable winding units stationary
Cable winding and unwinding stands, stationary or for mounting on lorries etc. For drums from 20-55 t. See accessories like drum drives, drum brakes etc. Techn. details see table below. Please ask for our more extensive offers.
Possible configurations:
Drum flange brakes, one or both sides, breaking force 12,5 resp. 25,0 kN at cable.
With an additional pre- and emergency brake braking forces up to 50 kN are possible.
Drive of the brakes per manual hydraulic pump or by electro-hydraulic drive
Drum drives one-side or double sides, pulling force 16,0 kN resp. 32,0 kN
Adjustable on the site to any drum width.
Cable-winding-stands,331736
Cable-winding-stands,331738
Cable-winding-stands,331740
Cable-winding-stands,331750
Cable-winding-stands,331752
CodeTypeCap. Drum-D Int. width kg
331736 KTU 20 ST20 t 2000-3700 any adjustable 1.870,00
331738 KTU 20 ST20 t 2800-4300 any adjustable 1.880,00
331740 KTU 25 ST25 t 3600-5100 any adjustable 1.945,00
331750 KTU 55 ST55 t 3600-5100 any adjustable 1.980,00
331752 KTU 55 ST55 t 4300-6000 any adjustable 1.980,00
2 | Drum shafts for KTU 20-55
Drum shafts for KTU 20-55. The height adjustable drum supports are equipped with ball bearing rollers in which the drum shafts turn easily. The stand can be adapted to any drum width. Drum shafts are available in length from 3000 to 5000 mm in partition of any 500 mm. The shaft must be of min. 1 m longer than the widest drum width. In standard it is equipped with 4 clamps for fixing the shaft and the drum. Centring bushes have to be ordered separately according to the drum shaft diameter and the bore diameter of the drums. See below.

Cable winding units,031483334
Cable winding units,031483344
Cable winding units,031483354
Cable winding units,031483364
Cable winding units,031483374
Cable winding units,031483384
Cable winding units,031483424
Cable winding units,031483454
Cable winding units,031483464
Cable winding units,031483466
Cable winding units,031483476
Cable winding units,031483478
CodeTypeD/L mm SWL Drum width kg
031483334 KSR 10122101/4000 16 t max. 3000 187,00
031483344 KSR 10825108/4000 20 t max. 3000 221,00
031483354 KSR 11417114/4000 20 t max. 3000 184,00
031483364 KSR 12120121/4000 24 t max. 3000 219,00
031483374 KSR 12714127/4000 22 t max. 3000 178,00
031483384 KSR 12725127/4000 30 t max. 3000 273,00
031483424 KSR 13917139/4000 31 t max. 3000 231,00
031483454 KSR 13930139/4000 38 t max. 3000 348,00
031483464 KSR 15925159/4000 54 t max. 3000 355,00
031483466 KSR 15925159/4500 54 t max. 3500 397,00
031483476 KSR 15930159/4500 59 t max. 3500 454,00
031483478 KSR 15930159/5000 59 t max. 4000 502,00
3 | Centring bushes for drum shafts D 101-159
Centring bushes for drum shafts to fit with the drum bore, see table below. Also available in other diameters. Bush length 80 mm

Cable winding units,315765
Cable winding units,315780
Cable winding units,315815
Cable winding units,315818
Cable winding units,315850
Cable winding units,315880
Cable winding units,315920
Cable winding units,315945
Cable winding units,315952
Cable winding units,315978
Cable winding units,315987
Cable winding units,315989
CodeTypeShaft-D Drum bore kg
315765 ZBS 101/125101 mm D 125 mm 10,00
315780 ZBS 101/140101 mm D 140 mm 12,00
315815 ZBS 108/145108 mm D 145 mm 15,00
315818 ZBS 108/200108 mm D 200 mm 9,00
315850 ZBS 114/150114 mm D 150 mm 15,00
315880 ZBS 114/200114 mm D 200 mm 15,00
315920 ZBS 121/200121 mm D 200 mm 15,00
315945 ZBS 127/150127 mm D 150 mm 4,00
315952 ZBS 127/200127 mm D 200 mm 12,00
315978 ZBS 139/200139 mm D 200 mm 12,00
315987 ZBS 159/185159 mm D 185 mm 16,00
315989 ZBS 159/200159 mm D 200 mm 18,00
4 | Clamps for drum shafts D 101-159 mm
Clamp for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. pcs.eel coated. Width 50 mm.

Klemmschellen,Trommelschellen,315340
Klemmschellen,Trommelschellen,315350
Clamps drum shafts,315360
Klemmschellen,Trommelschellen,315370
Clamps drum shafts,315380
Clamps drum shafts,315384
Clamps drum shafts,315385
Clamps drum shafts,315390
CodeTypeShaft-D kg
315340 KLS 101101-105 mm 2,00
315350 KLS 108108-110 mm 2,40
315360 KLS 114114-115 mm 3,00
315370 KLS 121121-123 mm 5,00
315380 KLS 127127-130 mm 3,40
315384 KLS 135135-137 mm 4,00
315385 KLS 139139-140 mm 3,60
315390 KLS 159159-160 mm 3,90
5 | Drum brakes for KTU 20-55
Drum brakes for KTU 20-55, operated by hand pump or electro-hydraulic pump by separate hydraulic power pack. Per drum flange 1 brake shoe in front and behind. The drum can be braked on one or on both flanges. If high braking forces are required, e.g. at cable lowering in shafts etc. the pre- and emergency brake with independent hand pump should be installed. Electric power packs for one or two flange brakes have to be ordered separately.
Drum flange brake on one or both sides, 12,5 resp. 25,0 kN braking force on the cable.
Hydraulic by hand pump or by electro-motor-hydraulic.
Cable winding units,331753
Cable winding units,331754
Cable winding units,331756
Cable winding units,3317561
Cable winding units,3317564
Cable winding units,331757
Cable winding units,331758
Cable winding units,3317581
CodeTypeDrum-D Brake Braking force kg
331753 TRB 37012000-3700 one-side min. 12,5 kN 135,00
331754 TRB 43012800-4300 one-side min. 12,5 kN 135,00
331756 TRB 51013600-5100 one-side min. 12,5 kN 136,00
3317561 TRB 60014300-6000 one-side min. 12,5 kN 149,00
3317564 TRB 37022000-3700 both-sides min. 12,5 kN 250,00
331757 TRB 43022800-4300 both-sides min. 25,0 kN 270,00
331758 TRB 51023600-5100 both-sides min. 25,0 kN 270,00
3317581 TRB 60024300-6000 both-sides min. 25,0 kN 270,00
6 | Drum brake shoes for drum brakes to KTU 20-55
Drum brake shoes to KTU 20-55. Each brake shoe is suitable for a certain range of drum diameter, see table below. They can easily be replaced by bigger or smaller ones. They are equipped by high performance brake linings of a long service life and can simply be changed by screwing right on the field.

Cable winding units,331798
Cable winding units,331799
Cable winding units,331800
Cable winding units,331804
Cable winding units,331808
Cable winding units,331812
Cable winding units,331816
Cable winding units,331818
Cable winding units,331820
CodeTypeDrum-D Radius kg
331798 TBS 24002000-2400 1100 17,00
331799 TBS 28002400-2800 1300 17,00
331800 TBS 32002800-3200 1500 17,00
331804 TBS 36003200-3600 1700 17,00
331808 TBS 41003600-4100 1920 17,00
331812 TBS 46004100-4600 2170 17,00
331816 TBS 51004600-5100 2420 17,00
331818 TBS 56005100-5600 2675 17,00
331820 TBS 61005600-6100 2920 17,00
7 | Drum pre-and emergency brake to KTU 20-55
Drum pre-and emergency brake to KTU 20-55, operated by an independent hand pump. The drum is braked from the bottom with two brake shoes on both flanges, when lowering cables in shafts etc. The brake shoes according to drum diameter have to be ordered separately.
Drum flange brakes on both sides, min. 25,0 kN braking force on the cable.
Hydraulic only by hand pump.
Cable winding units,3317584
Cable winding units,331759
Cable winding units,331760
Cable winding units,331761
CodeTypeDrum-D Brake Braking kg
3317584 TRV 37022000-3700 both-sides min. 25,0 kN 213,00
331759 TRV 43022800-4300 both-sides min. 25,0 kN 213,00
331760 TRV 51023600-5100 both-sides min. 25,0 kN 213,00
331761 TRV 60024300-6000 both-sides min. 25,0 kN 213,00
8 | Drum drives for KTU 20-55
Drum drives for KTU 20-55, for electro-hydraulic drives of separate hydraulic power packs. Per drum flange there are 1 tandem rubber drive rollers in front and 1 behind. With this drive the drum can be driven or braked with the same force, see table below. If high braking forces are required, e.g. at cable lowering in shafts etc. the pre- and emergency brake with independent hand pump should be installed. Electric power packs for one or two flange drives have to be ordered separately.
Drum drives, on one side or both sides, breaking force at the cable min. 8,0 resp. 16,0 kN
Accessory: hydraulic drive by electro-motor, continuous control.
The drive is able to brake, braking forces are equal to the drum drive forces.
Cable winding units,331764
Cable winding units,331765
Cable-winding-stands,331766
Cable-winding-stands,331768
Cable winding units,331770
Cable winding units,331772
Cable winding units,331773
Cable winding units,3317732
CodeTypeDrum-D Drive Below/top m/min. kg
331764 TAH 08022000-3700 one-side 16/8 kN 8/16 265,00
331765 TAH 16042000-3700 both-sides 32/16 kN 8/16 450,00
331766 TAH 08022800-4300 one-side 16/8 kN 8/16 260,00
331768 TAH 16042800-4300 both-sides 32/16 kN 8/16 530,00
331770 TAH 08023600-5100 one-side 16/8 kN 8/16 260,00
331772 TAH 16043600-5100 both-sides 32/16 kN 8/16 535,00
331773 TAH 08024300-6000 one-side 16/8 kN 8/16 260,00
3317732 TAH 16044300-6000 both-sides 32/16 kN 8/16 530,00
9 | Hand pump hydraulic for drum brakes
Hand pump hydraulic for drum brakes for KTU 20-55. The drum can be braked on one or on both flanges.

Cable winding units,331776
Cable winding units,331778
CodeTypeDrive Brake Below/top kg
331776 THH 4501Hand pump one-side 16/8 kN 29,00
331778 THH 4502Hand pump both-sides 32/16 kN 29,00
10 | Electro-hydraulic for drum brakes
Electro-hydraulic for drum brakes for KTU 20-55. The drum can be braked on one or on both flanges.

Cable winding units,331782
Cable winding units,331784
CodeTypeDrive Brake Below/top E-Motor kg
331782 TEH 4501El.-hydraulic one-side 16/8 kN 5,5 kW 65,00
331784 TEH 4502El.-hydraulic both-sides 32/16 kN 11,0 kW 62,00
11 | Electro-hydraulic for drum drives
Electro-hydraulic for drum drives for KTU 20-55. The drum can be driven on one or on both flanges.

Cable winding units,331786
Cable winding units,331788
CodeTypeDrive Drive Below/top E-Motor kg
331786 TTH 0802El.-hydraulic one-side 16/8 kN 5,5 kW 137,00
331788 TTH 1604El.-hydraulic both-sides 32/16 kN 11,0 kW 137,00