1 | Cable winding stands
Cable winding and unwinding stands, stationary or for mounting on lorries etc. For drums up to 1,5 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
Winding and unwinding equipment in many designs.
Suitable also for multiple drums for cables or hoses.
Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
The drum has to be loaded from the top by a hoist.
The switch board can be replaced on the site at any of the three frame corners.
Accessory rotating alu-drum shaft, select 0350.692xxx depending on internal width.
Cable-winding-stands,329100
Cable-winding-stands,329200
CodeTypeCap. Drum-D Int. width L/W/H mm kg
329100 KTA 1,0 ST1,0 t 630-1400 1000 mm 1320/1140/1100 108,00
329200 KTA 1,5 ST1,5 t 630-1800 1310 mm 1620/1450/1300 138,00
2 | Rotating drum shafts
Rotating drum shafts suitable to cable winding stands KTA 1,0 ST and KTA 1,5 ST. Please order clamps separately.

Rotating-drum-shafts,350684
Rotating-drum-shafts,3506845
CodeTypeSuitable for D/length SWL kg
350684 TAS 7511KTA 1,0 ST 75/1140 mm to 5 t 23,50
3506845 TAS 7514KTA 1,5 ST 75/1450 mm to 5 t 24,00
3 | Cable winding stand for 2 drums
Cable winding and unwinding stand for 2 drums, stationary or for mounting on trucks etc. For drums up to 1,0 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
Winding and unwinding equipment in many designs.
Suitable for 2 drums and also for multiple drums for cables or hoses.
Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
The drums have to be loaded from the top by a hoist.
accessory rotating alu-drum shaft, select 0350.692xxx depending on internal width.
Cable-winding-stands,329054
CodeTypeCap. Drum-D Int. width L/W/H mm kg
329054 KTA 1,2 ST1,0 t 630-1400 any width 1400/1200/1430/1100 111,00
4 | Cable drum drive to KTA 1.2
Cable drum drive to drum stand KTA 1.2, electric motor 0,75 kW, 400 V/50 Hz, with control box with frequency convertor, for winding and unwinding cables or hoses from KTA stand. Techn. details see table below. Please ask for our more extensive offers.

Cable drum drive,329540
CodeTypeDrive Pulley Pull kN Pull KN m/min. kg
329540 TEA 204electric D 220/80 bottom 2,5 on top 1;25 2-60 90,00
5 | Hose winding units with rotary transmission lead through
Hose winding units with rotary transmission lead through for air, water and suction tubes. Stationary or for mounting on lorries etc. For drums up to 1,0 t. Drum drives in electric, hydraulic or pneumatic version available. Techn. details see table below. Please ask for our more extensive offers.
Any adaptation according to your application is possible.
Suitable for single, multiple or several single drums for hoses and cables.
Drum drives electric, hydraulic or pneumatic version, see code 329.5xxx as accessory.
The drum has to be loaded from the top by a hoist.
accessory drum shaft, to be selected acc. to technical needs.
Hose winding machine,329050
Hose winding machine,329051
CodeTypeCap. Drum-D Int. width L/W/H mm kg
329050 KTA 0.5 DE0,5 t 750-1300 640 mm 1325/800/1150/1000 87,00
329051 KTA 1.0 DE1,0 t 750-1300 840 mm 1525/1000/1350/1200 106,00
6 | Cable winding stands
Cable winding and unwinding stands, mobile by 2 steering and 2 fixed wheels with parking brake. Wheels are coated with high wattage polyurethane. Suitable for drums up to 1,5 t and speeds up to 6 km/h. See accessories like: electro-, hydraulic- or pneumatic drum drives. Techn. details see table below. Please ask for our more extensive offers.
Winding and unwinding equipment in many designs.
Suitable also for multiple drums for cables or hoses.
Drum drives electric, hydraulic or pneumatic version, see below
The drum has to be loaded from the top by a hoist.
accessory rotating alu-drum shaft, select 350.684xxx depending on internal width.
Cable-winding-stands,329150
Cable-winding-stands,329250
CodeTypeCap. Drum-D Int. width L/W/H mm kg
329150 KTA 1,0 FA1,0 t 630-1400 1000 mm 1330/1180/1200 144,00
329250 KTA 1,5 FA1,5 t 630-1800 1310 mm 1630/1490/1400 174,00
7 | Cable drum drives
Cable drum drives for winding and unwinding cables from KTA stands. Techn. details see table below. Please ask for our more extensive offers.
TEA 208 - Electro 1,5 kW/400V, with frequency converter 25-100 Hz
TZ 200 - Hydraulic motor, 12 l/min. 160 bar, without hydraulic power pack
TP 205 - Pneumatic motor, max. 1 m³/min., 6 bar, incl. air equipment
Cable drum drive,329550
Cable drum drive,351210
Cable drum drive,351300
CodeTypeDrive Pulley Pull kN Pull kN rpm kg
329550 TEA 208electric D 240/200 bottom 2,5 on top 1,25 0-15 118,00
351210 TZ 200hydraul. D 150/205 bottom 2,5 on top 1,25 0-15 69,00
351300 TP 205pneum. D 150/205 bottom 2,5 on top 1,25 0-15 80,00
8 | Hydraulic power packs mobile
Hydraulic power pack for cable drum drive, with petrol engine equipped with rapid hose couplings.
Petrol power pack, tank 10 Litre, oil flow 12 l/min.
Electro power pack, tank 13 Litre, oil flow 14 l/min.
The hydraulic power pack must not be mounted on drawing bar of the trailer, the hitch load would be to high.
For control of the winding speed please order below mentioned hydraulic hose combination
Cable-drum-trailer,351330
Hydraulic-power-packs,hydraulic-drive-unit,425351
CodeTypeSuitable for Motor kW Pressure L/W/H mm kg
351330 THF 203drum drives Petrol 9,6 160 bar 854/457/507 74,00
425351 HE 210drum drives Electro 4,0 210 bar 733/405/433 67,00
9 | Hydraulic hose set
Hydraulic hose set 7 m, with volume governor for hydraulic power packs.

Hydraulic hose set,425381
CodeTypeLength Flow governor kg
425381 SL 77 m up to 30 l/min 13,20
10 | Cable winding units stationary
Cable winding units stationary or for mounting on vehicles etc. For drums up to 3.0 t. This special unit is especially prepared for a drum drive through the centre shaft of the drum. With this drive heavy cables loads can be safety lifted and lowered. Only customer selected steel drums will be fix mounted and cannot be replaced by a standard cable drum. On demand different steel drums can be supplied, which can be replaced in the KTU 3 ZE within 3-4 hours. Please ask for a more extensive offer.
Mainly used for lowering and lifting of cables and hoses in shafts and ground drillings.
Through this high lifting and lowering forces can be safely controlled.
Cable-winding-stands,331445
CodeTypeCap. Drum-D Int. width kg
331445 KTU 3 ZE3 t up to 2000 any width 403,00
11 | Cable drum drive through the centre
Drum drive for winding or unwinding of cables, hoses or other goods. Suitable for cable winding stands KTU 3 ZE. Electric braking motor 4,0 kW, 230/400 volts, frequency convertor, switch cupboard, mobile control panel with 10 m cable. Protection IP 55 hose proofed. This drum drive transmits the winding force through the central drum shaft. With this drive big cable loads can be safety lifted and lowered. Techn. details see below. Please ask for a more extensive offer.
Electric-brake motor with mitre gear 4,0 kW, 230/400 volt.
Frequency convertor, control box, mobile remote control with 10 m cable.
Protection IP 55 hose proof
Drum-jack-drive,drum-drive,333227
CodeTypeFor KTU Pull force m/min. kg
333227 TEZ 2013 ZE max. 13 kN 0-25 345,00