1 | Cable drum spindle jacks
Tripod cable drum spindle jacks, with crossbar captivated. Two required.

Below mentioned capacity is per pair. Two are required
Spindle-jacks,310200
CodeTypeCap. Drum-D kg
310200 LQ 20/5404 t max. 1600 12,10
2 | Cable drum lifter
Cable drum lifter, easy to handle, with adjustable catching claws. Steel construction galvanized. Two foot profiles 300x40x40 mm.

For one pair select one left-hand and one right-hand.
Drumlifter,311100
Drumlifter,311110
CodeTypeDesign SWL Drum-D kg
311100 TM 10LLeft-hand 1,0 t 600-1650 14,00
311110 TM 10RRight-hand 1,0 t 600-1650 14,00
3 | Cable drum rack-and-pinion jacks
Cable drum rack-and-pinion jacks, with height adjustable side claws. Safety crank and 2 rubber wheels.

Below mentioned capacity is per pair. Two are required
Rack-and-pinion-jacks,311130
Rack-and-pinion-jacks,311220
Rack-and-pinion-jacks,311250
Rack-and-pinion-jacks,311280
CodeTypeCap. Drum-D Base Height min. kg
311130 TZ 153 t 600-1750 500/330 805 32,00
311220 TZ 306 t 800-2500 625/450 1045 64,00
311250 TZ 5010 t 1000-3200 625/450 1350 87,00
311280 TZ 8016 t 1000-3200 625/450 1400 108,00
4 | Cable drum hydraulic jacks
Cable drum hydraulic jacks, with height adjustable central claw and 2 rubber wheels. Steel construction galvanized.

Below mentioned capacity is per pair. Two are required
Drumjacks,jacks,312130
Drumjacks,jacks,312160
Drumjacks,jacks,312200
CodeTypeCap. Drum-D Base Height min. Lift kg
312130 TH 316 t 800-2500 500/430 1340 150 54,00
312160 TH 6112 t 900-3200 650/400 1660 150 96,00
312200 TH 8116 t 900-3200 650/400 1660 150 99,00
5 | Solid alu drum shafts, rigid
Cable drum shafts rigid, solid alu with recessed ends and 2 clamps. Further lengths on request.

Alu-drum-shaft,314150
Alu-drum-shaft,314190
CodeTypeD/L mm Seat SWL kg
314150 KAV 751975/1900 D 66x115 to 5,6 t 25,00
314190 KAV 752175/2100 D 66x115 to 4,4 t 27,50
6 | Solid alu drum shafts, rotating
Cable drum shafts rotating, solid alu with bearings and recessed ends and 2 clamps. Further lengths on request.

Alu-drum-shaft,314600
Alu-drum-shaft,314640
CodeTypeD/L mm Seat SWL kg
314600 KAD 751975/1900 D 66x115 to 5,0 t 29,00
314640 KAD 752175/2100 D 66x115 to 4,4 t 31,30
7 | Tubular steel drum shafts, rigid
Cable drum shafts rigid, tubular steel with recessed ends and 2 clamps. Further lengths on request.

Drum-shafts,314300
Drum-shafts,314340
Drum-shafts,314380
CodeTypeD/L mm Seat SWL kg
314300 KSR 511051/1500 D 43x115 to 2,5 t 15,00
314340 KSR 761076/1850 D 66x115 to 6,6 t 30,80
314380 KSR 761476/2000 D 66x115 to 8,0 t 41,80
8 | Tubular steel drum shafts, rotating
Cable drum shafts rotating, tubular steel with bearings and recessed ends and 2 clamps. Further lengths on request.

Drum-shafts,314760
Drum-shafts,314770
Drum-shafts,314810
CodeTypeD/L mm Seat SWL kg
314760 KSD 600760/1500 D 50x115 to 2,5 t 21,50
314770 KSD 761076/1850 D 66x115 to 6,6 t 41,60
314810 KSD 761476/2000 D 66x115 to 7,0 t 53,20
9 | Solid alu drum shafts, rotating
Cable drum shafts rotating, solid alu with plain bearings without clamps. Further lengths on request. The bearings are without recessed ends. Therefore these drum shafts are not for use with drum shaft suspension WAH. These shafts are used for e.g. drum trailers or for any other drum lifting equipment.

Drum-shafts,3507871
Drum-shafts,350789
CodeTypeD/L mm Suitable for Bearing SWL kg
3507871 TAS 75075/1450 KVS 1000 D 76x80 to 5 t 23,00
350789 TAS 75275/1730 KVS 1500-2000 D 76x80 to 5 t 27,00
10 | Drum shaft suspension
Suspension with shackle only for rotating drum shafts for lifting and unwinding cable drums.

Below mentioned capacity is per pair. Two are required
Drum-shaft-suspension,315399
Drum-shaft-suspension,315400
Drum-shaft-suspension,315403
Drum-shaft-suspension,315406
CodeTypeFor shaft Clamping-D SWL kg
315399 WAH 60D 60-63 52 3 t 4,00
315400 WAH 76D 75-76 67 6 t 5,20
315403 WAH 90D 89-101 81 15 t 9,10
315406 WAH 108D 108-127 98 28 t 25,00
11 | Locating cones
Locating cone for drum shafts made of cast steel including clamp. With several steps for drum bores according to DIN.

Locating-cones,315430
Locating-cones,315460
Locating-cones,315490
CodeTypeFor shaft Steps-D kg
315430 ZKO 76D 75-76 140/130/125/105/100/90 5,50
315460 ZKO 90D 89-90 140/130/125/105/100 4,80
315490 ZKO 95D 94-95 140/130/125/105 4,50
12 | Stepped bushes
Stepped bushes of polyamide for shafts, with steps for drum bores according to DIN. Capable for highest drum weight.

pcs.epped bushes,315505
pcs.epped bushes,315506
pcs.epped bushes,315508
pcs.epped bushes,315510
pcs.epped bushes,315515
pcs.epped bushes,315520
CodeTypeFor shaft Steps-D kg
315505 ZBP 51D 50-51 80 0,26
315506 ZBP 60D 60-61 80 0,20
315508 ZBP 70D 70-71 140/125/99 0,92
315510 ZBP 76D 75-76 140/125/103 0,87
315515 ZBP 90D 89-90 140/125 0,64
315520 ZBP 95D 94-95 140/125 0,57
13 | Clamps for drum shafts
Clamp hinged, for drum shafts for lateral fixing of the cable drum on drum shafts of steel or alu. Hinged version, steel galvanized. Width 61 mm.

Clamps drum shafts,315030
Clamps drum shafts,315035
Clamps drum shafts,315040
Clamps drum shafts,315045
Clamps drum shafts,315050
Clamps drum shafts,315055
CodeTypeFor shaft Width kg
315030 KSV 51D 47-51 61 1,30
315035 KSV 60D 60-61 61 1,40
315040 KSV 70D 70-71 61 1,50
315045 KSV 76D 75-76 61 1,50
315050 KSV 90D 89-90 61 1,70
315055 KSV 95D 95-96 61 1,80