1 | Cable drum and coiling machines
Cable drum and coiling machines for cables and wires. For use in cable stores at distributors, industrial plants etc. Winding and measuring from drum to drum or to coil. Machine in stable steel construction. Drum shaft for bores from 60 mm with cones clamped by hand. Cable traversing with ball bearings to mount length measuring equipment LM 20 - LM 40, moving by hands. Electronic pre-set counter included as standard equipment. Included safety cage with automatic switch-off. Easy displacement through big wheels. Further accessory see below.
For winding from drum to drum or von drum to coils.
Frequency controlled drive with soft start and soft stop
Winding speed 15-80 rpm
DTR .... F -drum lifting by hand-hydraulic.
DTR .... FH - drum lift by electro-hydraulic
Cable drum machines,coiler,spooler,322380
Cable drum machines,coiler,spooler,322382
Cable drum machines,coiler,spooler,322387
CodeTypeC-D Drum-D E-motor Cap. L/W/H m kg
322380 DTR 80F3-35 400-800 1,1 kW/230 V 400 kg 1,6/1,4/1,4 315,00
322382 DTR 80FH3-35 400-800 1,1 kW/230 V 400 kg 1,6/1,4/1,4 341,00
322387 DTR 100FH3-40 400-1000 1,5 kW/400 V 800 kg 1,8/1,7/2,0 500,00
2 | Cable and wire length measuring machines
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
The measuring accuracy of all LM machines is of ± 0,2 %.
The accuracy refers to a cable length of at least 20 m.
Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322736
Cable length measuring machines,322737
Cable length measuring machines,322742
Cable length measuring machines,322743
CodeTypeC-D St-rope L/W/H mm kg
322736 LM 201-20 no 360/280/400 13,30
322737 LM 20S1-20 1-8 360/280/400 13,70
322742 LM 403-40 no 550/300/420 28,50
322743 LM 40S3-40 3-22 550/300/420 28,50
3 | Leading bushings
Leading bushings for thin cables and ropes to length machine LM 20 and LM 20 S. Set of 2 paces., easy to change.

Leading bushings,322738
Leading bushings,322739
CodeTypeSuitable for Cable/wire-D Mounted kg
322738 BU 06LM 20/20S <= 5 mm no, accessory 0,16
322739 BU 14LM 20/20S <= 12 mm yes, LM 20 S 0,16
4 | Leading rollers
Leading in- and out rollers for fitting on cable length measuring machines LM 20 and LM 20 S. 4 steel rollers

Cable length measuring machines,322741
CodeTypeSuitable for Cable/wire-D kg
322741 ER 20LM 20/20S max. 20 mm 1,20
5 | Roller bow
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM. Steel rollers D 25 mm.
Type RB 4090 and 6090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers.
RB 4018 and 6018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers.
Cable length measuring machines,322783
Cable length measuring machines,322784
CodeTypeSuitable for C-D Passage Deviation L/W/H mm kg
322783 RB 4090LM 40/40S max. 40 mm 45x45 mm 90° 400x180x380 10,10
322784 RB 4018LM 40/40S max. 40 mm 45x45 mm 180° 400x180x450 11,00
6 | Conformity assessment for LM 20-80
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.

Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
7 | Declaration of Conformity for LM 20-80
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Cable length measuring machines,322792
CodeType kg
322792 KT 001 0,01
8 | Calibration of length measuring machines LM 20-80
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.

Cable length measuring machines,322795
CodeType kg
322795 KA 001 0,02
9 | Verification of LM 20-80 before 2015
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.

CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
10 | Hand cutter
Cable or rope hand cutter including fixing plate for mounting on cable length measuring machines LM 20-40.

CodeTypeSuitable for For C-D St-ropes kg
322810 HK 35LM 20 35 mm no 5,80
322812 HS 35LM 20S 10 mm 10 mm 6,30
322815 HK 40LM 40 40 mm no 5,30
322816 HS 40LM 40S 14 mm 14 mm 4,80
11 | Cable cutting head, hydraulic
Cable cutting head, hydraulic for mounting on cable length measuring machines types LM, for cutting insulated CU- and AL-cables, not for steel ropes.

Cutting head, hydraulic,322818
Cable cutting head, hydraulic,322821
CodeTypeSuitable for For C-D St-ropes kg
322818 HK 40HLM 40 40 mm no 11,00
322821 HK 60HLM 60 60 mm no 14,50
12 | Cutting-off machine
Cutting-off machine for cables and ropes, suitable for CU, Al, ST. Range of diameter see table below.

Cutting-off machine,322802
Cutting-off machine,322804
CodeTypeSuitable for For CU/AL cable St-ropes kg
322802 TD 40LM 40 up to D 22 mm up to D 22 mm 11,00
322804 TD 60LM 60 up to D 32 mm up to D 32 mm 14,50
13 | Coil winder collapsible
Coil winder collapsible, cylindrical, adjustable in width. For fast serving of cable rings, including cable loop for fixing the cable head on the coil winder. As accessory also available eccentric clamp code 322.875, KE 41 for cable-D 1-40 mm.
After winding procedure the ring will be served through the spokes.
To take away the ring the coil winders flange will be folded down.
CodeTypeC-winder to Coil winder dimension Cable-D/m Cap. kg
322654 DTW 80VKDTR 80 FH D 800/420, int. 90-200 10/600, 30/50 100 kg 37,00
322656 DTW 100VKDTR 100 FH D 1000/450, int. 100-250 10/1200, 30/130 100 kg 39,00
14 | Cable loops
Cable loops for fixing the cable head to the coil winder for winding procedure.

Cable loops,322870
Cable loops,322871
CodeTypeSuitable for Length Steel rope-D kg
322870 KS 300all coil winders 300 mm 2,0 mm 0,02
322871 KS 500all coil winders 500 mm 2,5 mm 0,03
15 | Electronic cable traversing
Automatic electronic cable traversing unit to DTR 80 and DTR 100. Adjustment return points and cable diameter electronic with key button and rotary switch on the control panel. Incl. cable layering arm VA 20 for sensitive cables.

Layering arms,322834
CodeTypeSuitable for For C-D kg
322834 REL 26DDTR 80-100 3-40 mm 16,00
16 | Layering-over arm telescopic
Layering-over arm telescopic for traversing sensitive cables to REL 26D on DTR machines

Layering arms,322786
CodeTypeSuitable for For C-D Machine kg
322786 VA 20DTR 80-100 3-40 mm LM 20/40/60 8,00
17 | Control arm
Control arm with nivomat to prevent from damage of Fibre Optic and sensitive CU-cables up to D 12 mm during winding process. Light control arm of aluminium, length approx. 1050 mm, bending radius R 150 mm, with adjustable weights to the winding process. Arm is easy removable for winding of heavier cables.

Layering arms,322720
Layering arms,322723
CodeTypeSuitable for For C-D Length kg
322720 SAA 20LM 20 12 mm 1050 mm 8,00
322723 SAA 40LM 40 12 mm 1050 mm 10,00
18 | Laser-Pointer
Laser-Pointer for easy and accurate adjustment of cable traversing on cable winding machines. Fixing on layering arm or length measuring device LM 20-80

Layering arms,322839
CodeTypeColour To mount kg
322839 LP 10red on LM 20 - 80 5,00
19 | Moving equipment, hydr.
Moving equipment for hydraulic lift of the winding machine and for displacement by electric motor drive.

Moving equipment, hydr.,322974
CodeTypeSuitable for Suitable for Lifting Running kg
322974 HG 200HITMDTR 100 FH TR 250-256 Hydraulic Electro motor 65,00