1 | Cable drum and coiling machines
Cable drum and coiling machines for cables and wires, series TRG. Automatic working machine for bigger cable drums. Automatic cable traversing with infinitely variable electronic setting of the cable diameter. Cable traversing ready to mount length measuring equipment LM 40 - LM 80. Electronic pre-set counter included as standard equipment and many other special functions. Control through central touch panel 7" with option to connection on PC. Safety cage with automatic switch-off. Further accessory see below.
Frequency controlled drive with soft start and soft stop.
Hydraulic open and closing of the lifting arms with automatic drum fixing.
Including coil winder collapsible, OD 800 mm, int. D 450 mm, width 250 mm,
Coil winder speed on all machines TRG 160-250FH is 15-100 rpm.
Automatic swivelling of the coil winder into working position.
Cable drum machines,coiler,spooler,322529
Cable drum machines,coiler,spooler,322539
Cable drum machines,coiler,spooler,322546
CodeTypeC-D Drum-D kW/V rpm Cap. L/W/H m kg
322529 TRG 160FH10-45 600-1600 3,0/400 15-80 2000 kg 2,6/2,7/2,2 800,00
322539 TRG 200FH10-60 600-2000 5,5/400 10-70 3000kg 3,0/2,4/2,4 1.000,00
322546 TRG 250FH10-80 600-2500 7,5/400 7-60 4000kg 3,6/2,7/2,7 1.300,00
2 | Cable and wire length measuring machines
Cable and wire length measuring machines for stationary applications in connection with all cable winding machines. Very robust steel construction. Due to the big perimeter of 1,00 m the accuracy is ± 0,2 %, figure height 7 mm. Approved by the German Federal Physical and Technical Institute (PTB). Max. measuring speed 70 m/min. Please ask for an extensive offer.
Types LM ... only for insulated cables, types LM ... S also for bare metal goods.
The measuring accuracy of all LM machines is of ± 0,2 %.
The accuracy refers to a cable length of at least 20 m.
Basic machine with mech. counter, electronic pre-counter for autom. cut-off as accessory.
In the winding machines DTR/TR/TRG the electronic pre-set counter is installed as standard.
Cable length measuring machines,322748
Cable length measuring machines,322749
Cable length measuring machines,322754
Cable length measuring machines,322755
CodeTypeC-D St-rope L/W/H mm kg
322748 LM 6010-60 no 700/360/600 54,00
322749 LM 60S10-60 6-32 700/360/600 54,00
322754 LM 8010-80 no 870/395/670 127,00
322755 LM 80S10-80 10-55 870/395/670 128,00
3 | Roller bow
Roller bow for unwinding cables from drum of upper drum stands. For fitting at cable length measuring machines LM 60 and LM 60 S.
Type RB 6090 - 90° deviation for unwinding from upper drum stands, 15 steel rollers D 25 mm.
RB 6018 - 180° deviation for unwinding drums from opposite drum stands, 17 steel rollers D 25 mm.
Cable length measuring machines,322781
Cable length measuring machines,322782
CodeTypeSuitable for C-D Passage Deviation L/W/H mm kg
322781 RB 6090LM 60/60S max. 60 mm 65x65 mm 90° 450x200x500 13,00
322782 RB 6018LM 60/60S max. 60 mm 65x65 mm 180° 450x180x550 15,00
4 | Conformity assessment for LM 20-80
On January 1st, 2015 the new German Verification Act (MessEG) and the new Verification Ordinance (MessEV) entered into force. In the new Verification Act, the initial verification is replaced by the conformity assessment. The EC conformity assessment is required with first delivery of the measuring machine if the machine's purchaser sells cables in the course of trade. The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period.

Validity of the conformity assessment for cable measuring machines in retail is unlimited in Germany as long as no seal is damaged or the maximum number of errors permitted in service is not exceeded. Divergent regulations may apply in other countries. These are obtainable from the applicable national laws.
Kabellängenmessgerät,Kabellängenmeßgerät,322790
CodeTypeConformity assessment kg
322790 see aboveComment see above 0,00
5 | Declaration of Conformity for LM 20-80
In accordance with EC Directive 2004/22/EC, Appendix MI-009, a declaration of conformity may be issued by the manufacturer of the length measuring machine. Condition for this is the previous presentation at and approval by a conformity assessment body (verification office). The declaration of conformity is valid in all EU member states. The machines are therefore deemed duly verified until expiry of the nationally regulated verification period. The purchaser of a measuring machine with declaration of conformity is obliged to register the measuring machine with the competent verification office (in Germany at www.eichamt.de) immediately following the acquisition.
 
On expiry of the conformity assessment for the above-mentioned reasons (section Conformity assessment), the competent verification office performs a reverification. Before this verification, examination, adjustment and calibration of the measuring machine by trained personnel is recommended.
The accuracies of the Vetter cable measuring machines comply with the European Measuring Instruments Directive 2004/22/EC, accuracy class III, +/- 0.5 % with a minimum measuring length of 5 m
Calibration of length meters,322792
CodeType kg
322792 KT 001 0,01
6 | Calibration of length measuring machines LM 20-80
In many cases calibration (KA 001) by Vetter suffices as proof of the successful testing of length measuring devices and machines according to ISO 9000 et seq. and other quality management systems. It does, however, not replace the EC conformity assessment for the sale of cables in the course of trade.

Calibration of length meters,322795
CodeType kg
322795 KA 001 0,02
7 | Verification of LM 20-80 before 2015
The regulations for reverification have not changed. A verification that was performed before 2015 still needs to be repeated by the competent verification office every 2 years.

Kabellängenmessgerät,Kabellängenmeßgerät,322796
CodeTypeVerification before 2015 kg
322796 see aboveComment see above 0,00
8 | Supporting table for two measuring machines
Supporting table for two length measuring machines LM 40-80, with two-way switch in control panel.

Supporting table for two measuring machines,322780
CodeTypeSuitable for kg
322780 AM 40TR/TRG 160-256 6,00
9 | Cable cutting head, hydraulic
Cable cutting head, hydraulic for mounting on cable length measuring machines types LM, for cutting insulated CU- and AL-cables, not for steel ropes.

Cable cutting head, hydraulic,322821
Cable cutting head,322825
CodeTypeSuitable for For C-D St-ropes kg
322821 HK 60HLM 60 60 mm no 14,50
322825 HK 81HLM 80 80 mm no 25,00
10 | Cutting-off machine
Cutting-off machine for cables and ropes, suitable for CU, Al, ST. Range of diameter see table below.

Cutting-off machine,322804
Cutting-off machine,322806
CodeTypeSuitable for For CU/AL cable St-ropes kg
322804 TD 60LM 60 / S up to D 32 mm up to D 32 mm 14,50
322806 TD 80LM 80 / S up to D 55 mm up to D 55 mm 18,00
11 | Centring sleeves for drums
Standard all drum winding units are equipped with the following centring sleeves:
TR/TRG 125-166 standard for centre holes of D 80 mm
TR/TRG 200-256 standard for centre holes of D 80 and D 125 mm.
For other centre holes special sleeves see below have to be ordered.
Locating-cones,322859
Locating-cones,322860
Locating-cones,322861
Locating-cones,322862
Locating-cones,322864
Locating-cones,322867
CodeTypeSuitable for Fixing Form For hole kg
322859 ANZ 125TR/TRG 200-256 D 80 mm cylind. D 125 mm 4,00
322860 ANZ 110TR/TRG 125-256 D 80 mm cylind. D 110 mm 6,00
322861 ANZ 107TR/TRG 125-256 D 80 mm cylind. D 100+70 mm 6,50
322862 ANZ 080TR/TRG 125-256 D 40 mm cylind. D 80 mm 4,00
322864 AKZ 66TR/TRG 125-256 D 40 mm conic D 85-35 mm 5,40
322867 AKK 65TR/TRG 125-256 conic conic D 85-35 mm 7,20
12 | Moving equipment, mech.
Moving equipment for mechanical lift of the winding machine and for displacement by a hand draw bar.

Moving equipment, mech.,322964
CodeTypeSuitable for Lifting Running kg
322964 HG 125ABTR 165-250 Tilting draw bar manual 17,00
13 | Moving equipment, hydr.
Moving equipment for electro-hydraulic lift of the winding machine and for displacement by a hand draw bar.

Moving equipment, hydr.,322965
Moving equipment, hydr.,322966
CodeTypeSuitable for Suitable for Lifting Running kg
322965 HG 100HITR 125-165 TR 146-166 Hydraulic manual 25,00
322966 HG 125HITR 200-250 TR 206-256 Hydraulic manual 26,00
14 | Moving equipment, hydr.
Moving equipment for hydraulic lift of the winding machine and for displacement by electric motor drive.

Moving equipment, hydr.,322974
CodeTypeSuitable for Suitable for Lifting Running kg
322974 HG 200HITMDTR 100 TR 250-256 Hydraulic Electro motor 65,00